Mdbx now takes a logger - but this has not been pushed to all callers -
meaning it had an invalid logger
This fixes the log propagation.
It also fixed a start-up issue for http.enabled and txpool.disable
created by a previous merge
This fixes an issue where the mumbai testnet node struggle to find
peers. Before this fix in general test peer numbers are typically around
20 in total between eth66, eth67 and eth68. For new peers some can
struggle to find even a single peer after days of operation.
These are the numbers after 12 hours or running on a node which
previously could not find any peers: eth66=13, eth67=76, eth68=91.
The root cause of this issue is the following:
- A significant number of mumbai peers around the boot node return
network ids which are different from those currently available in the
DHT
- The available nodes are all consequently busy and return 'too many
peers' for long periods
These issues case a significant number of discovery timeouts, some of
the queries will never receive a response.
This causes the discovery read loop to enter a channel deadlock - which
means that no responses are processed, nor timeouts fired. This causes
the discovery process in the node to stop. From then on it just
re-requests handshakes from a relatively small number of peers.
This check in fixes this situation with the following changes:
- Remove the deadlock by running the timer in a separate go-routine so
it can run independently of the main request processing.
- Allow the discovery process matcher to match on port if no id match
can be established on initial ping. This allows subsequent node
validation to proceed and if the node proves to be valid via the
remainder of the look-up and handshake process it us used as a valid
peer.
- Completely unsolicited responses, i.e. those which come from a
completely unknown ip:port combination continue to be ignored.
-
- lives in internal/logging
- all log flags moved to internal/logging/flags
- allows continued use of root logger via log.Info etc.
- update logger to take change allowing string to lvl for 'trace'
Verbosity flag is overridden by log.console.verbosity. Logs will be
colocated if all run as one process, only split where progs are run as
separate processes, in a future update this will be addressed so for
example rpcdeamon will always log to it's own file
--nat stun is an automatic external IP detection alternative to manual --nat extip option.
It can be used both at home or on production servers without any extra setup.
It is fast (up to 5 ms) and more reliable than alternatives (as the request goes to the public internet).
This auto-detection is useful to run multiple instances of a service in cloud environments
where the node IPs are not known in advance.
Most places that used this method were cutting off the 1st byte.
Refactor this idea to a common place.
* better naming: MarshalPubkey matches existing UnmarshalPubkey
* "Std" suffix for the ANSI standard encoding without cut off
* docs
If --nat extip:1.2.3.4 option is specified, the port mapping logic
(AddMapping/DeleteMapping) does nothing.
This optimization avoids running a goroutine for doing nothing.
This PR enables running the new discv5 protocol in both LES client
and server mode. In client mode it mixes discv5 and dnsdisc iterators
(if both are enabled) and filters incoming ENRs for "les" tag and fork ID.
The old p2p/discv5 package and all references to it are removed.
Co-authored-by: Felix Lange <fjl@twurst.com>
# Conflicts:
# cmd/bootnode/main.go
# cmd/faucet/faucet.go
# cmd/utils/flags.go
# les/client.go
# les/commons.go
# les/enr_entry.go
# les/server.go
# les/serverpool.go
# les/serverpool_test.go
# mobile/discover.go
# mobile/params.go
# p2p/discv5/database.go
# p2p/discv5/metrics.go
# p2p/discv5/net.go
# p2p/discv5/net_test.go
# p2p/discv5/node.go
# p2p/discv5/node_test.go
# p2p/discv5/sim_test.go
# p2p/discv5/table.go
# p2p/discv5/table_test.go
# p2p/discv5/ticket.go
# p2p/discv5/topic.go
# p2p/discv5/topic_test.go
# p2p/discv5/udp.go
# p2p/server.go
* p2p/enr: add entries for for IPv4/IPv6 separation
This adds entry types for "ip6", "udp6", "tcp6" keys. The IP type stays
around because removing it would break a lot of code and force everyone
to care about the distinction.
* p2p/enode: track IPv4 and IPv6 address separately
LocalNode predicts the local node's UDP endpoint and updates the record.
This change makes it predict IPv4 and IPv6 endpoints separately since
they can now be in the record at the same time.
* p2p/enode: implement base64 text format
* all: switch to enode.Parse(...)
This allows passing base64-encoded node records to all the places that
previously accepted enode:// URLs. The URL format is still supported.
* cmd/bootnode, p2p: log node URL instead of ENR
...and return the base64 record in NodeInfo.
This PR adds enode.LocalNode and integrates it into the p2p
subsystem. This new object is the keeper of the local node
record. For now, a new version of the record is produced every
time the client restarts. We'll make it smarter to avoid that in
the future.
There are a couple of other changes in this commit: discovery now
waits for all of its goroutines at shutdown and the p2p server
now closes the node database after discovery has shut down. This
fixes a leveldb crash in tests. p2p server startup is faster
because it doesn't need to wait for the external IP query
anymore.
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.
Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.
The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.
* p2p/discover: port to p2p/enode
This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:
- Table.Lookup is not available anymore. It used to take a public key
as argument because v4 protocol requires one. Its replacement is
LookupRandom.
- Table.Resolve takes *enode.Node instead of NodeID. This is also for
v4 protocol compatibility because nodes cannot be looked up by ID
alone.
- Types Node and NodeID are gone. Further commits in the series will be
fixes all over the the codebase to deal with those removals.
* p2p: port to p2p/enode and discovery changes
This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.
New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.
* p2p/simulations, p2p/testing: port to p2p/enode
No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:
- testing.ProtocolSession tracks complete nodes, not just their IDs.
- adapters.NodeConfig has a new method to create a complete node.
These changes were needed to make swarm tests work.
Note that the NodeID change makes the code incompatible with old
simulation snapshots.
* whisper/whisperv5, whisper/whisperv6: port to p2p/enode
This port was easy because whisper uses []byte for node IDs and
URL strings in the API.
* eth: port to p2p/enode
Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.
* les: port to p2p/enode
Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.
* node: port to p2p/enode
This change simply replaces discover.Node and discover.NodeID with their
new equivalents.
* swarm/network: port to p2p/enode
Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).
There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.
Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
* p2p: add DialRatio for configuration of inbound vs. dialed connections
* p2p: add connection flags to PeerInfo
* p2p/netutil: add SameNet, DistinctNetSet
* p2p/discover: improve revalidation and seeding
This changes node revalidation to be periodic instead of on-demand. This
should prevent issues where dead nodes get stuck in closer buckets
because no other node will ever come along to replace them.
Every 5 seconds (on average), the last node in a random bucket is
checked and moved to the front of the bucket if it is still responding.
If revalidation fails, the last node is replaced by an entry of the
'replacement list' containing recently-seen nodes.
Most close buckets are removed because it's very unlikely we'll ever
encounter a node that would fall into any of those buckets.
Table seeding is also improved: we now require a few minutes of table
membership before considering a node as a potential seed node. This
should make it less likely to store short-lived nodes as potential
seeds.
* p2p/discover: fix nits in UDP transport
We would skip sending neighbors replies if there were fewer than
maxNeighbors results and CheckRelayIP returned an error for the last
one. While here, also resolve a TODO about pong reply tokens.
This commit affects p2p/discv5 "topic discovery" by running it on
the same UDP port where the old discovery works. This is realized
by giving an "unhandled" packet channel to the old v4 discovery
packet handler where all invalid packets are sent. These packets
are then processed by v5. v5 packets are always invalid when
interpreted by v4 and vice versa. This is ensured by adding one
to the first byte of the packet hash in v5 packets.
DiscoveryV5Bootnodes is also changed to point to new bootnodes
that are implementing the changed packet format with modified
hash. Existing and new v5 bootnodes are both running on different
ports ATM.
