* Add revive and phoenix
* store enode address to file, then read it from tester
* store enode address to file, then read it from tester
* rebase master
* fix miss-type
* dbg p2p-sub-protocol, add self-destruct test case
* re-create blockFetcher
* exit syncer loop and start new one
* rebase to master
* use core.GenerateChain
* root miss-match
* introduce reduceComplexity flag
* fix transfer to 0 account
* cleanup
* test-case for intermediate cache
* clean
* clean
* clean
* fix handler panic
Co-authored-by: Alexey Akhunov <akhounov@gmail.com>
Co-authored-by: alex.sharov <alex.sharov@lazada.com>
This adds additional logic to re-resolve the root name of a tree when a
couple of leaf requests have failed. We need this change to avoid
getting into a failure state where leaf requests keep failing for half
an hour when the tree has been updated.
* p2p: new dial scheduler
This change replaces the peer-to-peer dial scheduler with a new and
improved implementation. The new code is better than the previous
implementation in two key aspects:
- The time between discovery of a node and dialing that node is
significantly lower in the new version. The old dialState kept
a buffer of nodes and launched a task to refill it whenever the buffer
became empty. This worked well with the discovery interface we used to
have, but doesn't really work with the new iterator-based discovery
API.
- Selection of static dial candidates (created by Server.AddPeer or
through static-nodes.json) performs much better for large amounts of
static peers. Connections to static nodes are now limited like dynanic
dials and can no longer overstep MaxPeers or the dial ratio.
* p2p/simulations/adapters: adapt to new NodeDialer interface
* p2p: re-add check for self in checkDial
* p2p: remove peersetCh
* p2p: allow static dials when discovery is disabled
* p2p: add test for dialScheduler.removeStatic
* p2p: remove blank line
* p2p: fix documentation of maxDialPeers
* p2p: change "ok" to "added" in static node log
* p2p: improve dialTask docs
Also increase log level for "Can't resolve node"
* p2p: ensure dial resolver is truly nil without discovery
* p2p: add "looking for peers" log message
* p2p: clean up Server.run comments
* p2p: fix maxDialedConns for maxpeers < dialRatio
Always allocate at least one dial slot unless dialing is disabled using
NoDial or MaxPeers == 0. Most importantly, this fixes MaxPeers == 1 to
dedicate the sole slot to dialing instead of listening.
* p2p: fix RemovePeer to disconnect the peer again
Also make RemovePeer synchronous and add a test.
* p2p: remove "Connection set up" log message
* p2p: clean up connection logging
We previously logged outgoing connection failures up to three times.
- in SetupConn() as "Setting up connection failed addr=..."
- in setupConn() with an error-specific message and "id=... addr=..."
- in dial() as "Dial error task=..."
This commit ensures a single log message is emitted per failure and adds
"id=... addr=... conn=..." everywhere (id= omitted when the ID isn't
known yet).
Also avoid printing a log message when a static dial fails but can't be
resolved because discv4 is disabled. The light client hit this case all
the time, increasing the message count to four lines per failed
connection.
* p2p: document that RemovePeer blocks
This is a temporary fix for a problem which started happening when the
dialer was changed to read nodes from an enode.Iterator. Before the
iterator change, discovery queries would always return within a couple
seconds even if there was no Internet access. Since the iterator won't
return unless a node is actually found, discoverTask can take much
longer. This means that the 'emergency connect' logic might not execute
in time, leading to a stuck node.
* p2p/dnsdisc: add support for enode.Iterator
This changes the dnsdisc.Client API to support the enode.Iterator
interface.
* p2p/dnsdisc: rate-limit DNS requests
* p2p/dnsdisc: preserve linked trees across root updates
This improves the way links are handled when the link root changes.
Previously, sync would simply remove all links from the current tree and
garbage-collect all unreachable trees before syncing the new list of
links.
This behavior isn't great in certain cases: Consider a structure where
trees A, B, and C reference each other and D links to A. If D's link
root changed, the sync code would first remove trees A, B and C, only to
re-sync them later when the link to A was found again.
The fix for this problem is to track the current set of links in each
clientTree and removing old links only AFTER all links are synced.
* p2p/dnsdisc: deflake iterator test
* cmd/devp2p: adapt dnsClient to new p2p/dnsdisc API
* p2p/dnsdisc: tiny comment fix
* build: use golangci-lint
This changes build/ci.go to download and run golangci-lint instead
of gometalinter.
* core/state: fix unnecessary conversion
* p2p/simulations: fix lock copying (found by go vet)
* signer/core: fix unnecessary conversions
* crypto/ecies: remove unused function cmpPublic
* core/rawdb: remove unused function print
* core/state: remove unused function xTestFuzzCutter
* core/vm: disable TestWriteExpectedValues in a different way
* core/forkid: remove unused function checksum
* les: remove unused type proofsData
* cmd/utils: remove unused functions prefixedNames, prefixFor
* crypto/bn256: run goimports
* p2p/nat: fix goimports lint issue
* cmd/clef: avoid using unkeyed struct fields
* les: cancel context in testRequest
* rlp: delete unreachable code
* core: gofmt
* internal/build: simplify DownloadFile for Go 1.11 compatibility
* build: remove go test --short flag
* .travis.yml: disable build cache
* whisper/whisperv6: fix ineffectual assignment in TestWhisperIdentityManagement
* .golangci.yml: enable goconst and ineffassign linters
* build: print message when there are no lint issues
* internal/build: refactor download a bit
* rpc: improve codec abstraction
rpc.ServerCodec is an opaque interface. There was only one way to get a
codec using existing APIs: rpc.NewJSONCodec. This change exports
newCodec (as NewFuncCodec) and NewJSONCodec (as NewCodec). It also makes
all codec methods non-public to avoid showing internals in godoc.
While here, remove codec options in tests because they are not
supported anymore.
* p2p/simulations: use github.com/gorilla/websocket
This package was the last remaining user of golang.org/x/net/websocket.
Migrating to the new library wasn't straightforward because it is no
longer possible to treat WebSocket connections as a net.Conn.
* vendor: delete golang.org/x/net/websocket
* rpc: fix godoc comments and run gofmt
This adds all dashboard changes from the last couple months.
We're about to remove the dashboard, but decided that we should
get all the recent work in first in case anyone wants to pick up this
project later on.
* cmd, dashboard, eth, p2p: send peer info to the dashboard
* dashboard: update npm packages, improve UI, rebase
* dashboard, p2p: remove println, change doc
* cmd, dashboard, eth, p2p: cleanup after review
* dashboard: send current block to the dashboard client
This adds an implementation of node discovery via DNS TXT records to the
go-ethereum library. The implementation doesn't match EIP-1459 exactly,
the main difference being that this implementation uses separate merkle
trees for tree links and ENRs. The EIP will be updated to match p2p/dnsdisc.
To maintain DNS trees, cmd/devp2p provides a frontend for the p2p/dnsdisc
library. The new 'dns' subcommands can be used to create, sign and deploy DNS
discovery trees.
Most of these changes are related to the Go 1.13 changes to test binary
flag handling.
* cmd/geth: make attach tests more reliable
This makes the test wait for the endpoint to come up by polling
it instead of waiting for two seconds.
* tests: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* crypto/ecies: remove useless -dump flag in tests
* p2p/simulations: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* build: remove workaround for ./... vendor matching
This workaround was necessary for Go 1.8. The Go 1.9 release changed
the expansion rules to exclude vendored packages.
* Makefile: use relative path for GOBIN
This makes the "Run ./build/bin/..." line look nicer.
* les: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* eth: chain config (genesis + fork) ENR entry
* core/forkid, eth: protocol independent fork ID, update to CRC32 spec
* core/forkid, eth: make forkid a struct, next uint64, enr struct, RLP
* core/forkid: change forkhash rlp encoding from int to [4]byte
* eth: fixup eth entry a bit and update it every block
* eth: fix lint
* eth: fix crash in ethclient tests
The dialer limits itself to one attempt every 30s. Apply the same limit
in Server and reject peers which try to connect too eagerly. The check
against the limit happens right after accepting the connection.
Further changes in this commit ensure we pass the Server logger
down to Peer instances, discovery and dialState. Unit test logging now
works in all Server tests.
