* First
* More on SA interpreter
* Fixup
* Add cfg action to hack binary that invokes the SaInterpreter. Added an operation handler for PUSH1
* refactor cfg tests into separate file
* Move cfg tests into separate file
* More refactoring into new file
* dataflow interpreter
* work on cfg0
* finish cfg0
* df works on base examples
* refactor into dataflow spec
* add bounded stack
* add harder example
* fix switch pass thru
* fix switch pass thru
* bug fix, and better printing
* manual merge
* restore call to test gencfg
* abstract interpretation based cfg analysis
* fix post signature
* use uint256 instead uint64, add post function
* preprocess stmts
* initial implementation of resolve
* fix resolve
* fix resolve
* print stmts for edges
* print stmts for edges
* print states
* print states
* bug fixes, debugging
* fix jumpi dest - first working impl
* reachability analysis to filter out dead edges
* add all transfer functions
* larger contract bytecodes from solc compiler
* simple solidity contract goes thru
* add deposit contract bytecode
* rename deposit contract test
* fix new contract arg
* Address non-determinism leading to imprecise results
* improve debugging output
* improve debugging output
* improve debugging output
* fix for bug causing incorrect analysis results
* fix for bug causing incorrect analysis results
* fix for bug causing incorrect analysis results
* add more test cases
* fix coverage bug
* debugging for non-termination
* fix bad fixpoint check
* fix data inference
* fix transfer function for halting stmts
* switch to deposit contract test, disable debugging
* add anly counter to viz, fix stmt.valid check
* show all preds, adjust anlycounter behavior
* dfs instead of bfs to fail earlier
* viz improvements
* add worklist size to viz
* add test case for private functions
* valueset analysis
* add more checks to fail earlier in the analysis to help debugging, improve debugging output, catch additional bad jumps
* delete old code
* delete old code
* delete old code
* fix up minor changes to jump table
* copy over comments from cgf-1 branch
* remove minor diffs
* add recompiled deposit contract
* graph viz
* cleanup/refactoring
* initial impl of viz
* script to run cfg anly and generate dot file
* div example
* accept bytecode from cmd line
* add minimal deposit contract example
* replace valueset analysis with stackset analysis
* get in sync with master
* sync with master
* fix linting
* fix linting
* fix linting
* reformatting
* fix linting
* fix linting
* fix linting
* fix linting
* fix linting
* fix linting
* fix linting
Co-authored-by: Alexey Akhunov <akhounov@gmail.com>
* v0
* more docs, less customization
* more docs, less customization
* more docs, less customization
* don't store db reference
* rely on fact that lmdb key/value valid until end of transaction
* clean
* clean
* v0
* v1
* v3
* v4
* clean
* temporary fix of txpool
* Add debug logs about tx start/commit
* Add debug logs about tx start/commit
* Add debug logs about tx start/commit
* add condition
* tx pool to not hold own db
* try to enable TxPool in integration
* exclude tx pool from tx
* exclude tx pool from integration
* reduce limit
* fix integration
* clean
* clean
* clean
* clean
* clean
* exclude tx pool unwind
* exclude tx pool unwind in integration
* fix integration tx pool
* fix commit
* fix current stage after unwind
* fix current stage after unwind
* fix linter
* move unwind of tx_pool after unwind of unwind of senders, then all stages from body to tx_pool will be inside tx.
* move body and headers unwind out of tx
* fix unwind order after reboot
* add support external tx to exec stage
* clean
* clean
* clean
* clean
* clean
* add logs
* better id check
* better id check
* timer-based logs
* timer-based logs
* delegate progress calculation to user
* delegate progress calculation to user
* delegate progress calculation to user
* clear
* add logs to senders recovery
* use default dir in integration
* more logs
* more logs
* add logging to loader
* use pure tx in etl loading, logs in mutation commit
* clean
* bletter logging and more cleanup
* bletter logging and more cleanup
* increase batch size to 500M
* better batch commit logging
* async fsync
* sync fsync
* sync fsync
* unify logging
* fix corner-case when etl can use empty bucket name
* fix tests
* better logging
* better logging
* rebase master
* remove lmdb.NoMetaSync flag for now
* consistent walk and multi-walk
* clean
* sub tx
* add consistent multi-put
* implement dupsort support in one new cursor method
* clear
* core: avoid modification of accountSet cache in tx_pool
when runReorg, we may copy the dirtyAccounts' accountSet cache to promoteAddrs
in which accounts will be promoted, however, if we have reset request at the
same time, we may reuse promoteAddrs and modify the cache content which is
against the original intention of accountSet cache. So, we need to make a new
slice here to avoid modify accountSet cache.
* core: fix flatten condition + comment
Co-authored-by: Felix Lange <fjl@twurst.com>
This replaces the two-stage shutdown scheme with the one we
use almost everywhere else: a single quit channel signalling
termination.
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth/downloader: refactor downloader + queue
downloader, fetcher: throttle-metrics, fetcher filter improvements, standalone resultcache
downloader: more accurate deliverytime calculation, less mem overhead in state requests
downloader/queue: increase underlying buffer of results, new throttle mechanism
eth/downloader: updates to tests
eth/downloader: fix up some review concerns
eth/downloader/queue: minor fixes
eth/downloader: minor fixes after review call
eth/downloader: testcases for queue.go
eth/downloader: minor change, don't set progress unless progress...
eth/downloader: fix flaw which prevented useless peers from being dropped
eth/downloader: try to fix tests
eth/downloader: verify non-deliveries against advertised remote head
eth/downloader: fix flaw with checking closed-status causing hang
eth/downloader: hashing avoidance
eth/downloader: review concerns + simplify resultcache and queue
eth/downloader: add back some locks, address review concerns
downloader/queue: fix remaining lock flaw
* eth/downloader: nitpick fixes
* eth/downloader: remove the *2*3/4 throttling threshold dance
* eth/downloader: print correct throttle threshold in stats
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
# Conflicts:
# eth/downloader/downloader.go
# eth/downloader/downloader_test.go
# eth/downloader/queue.go
# eth/downloader/statesync.go
# eth/fetcher/block_fetcher.go
Solves issue#20582. Non-executable transactions should not be evicted on each tick if there are no promote transactions or if a pending/reset empties the pending list. Tests and logging expanded to handle these cases in the future.
core/tx_pool: use a ts for each tx in the queue, but only update the heartbeat on promotion or pending replaced
queuedTs proper naming
# Conflicts:
# core/tx_pool.go
* core: added local tx pool test case
* core, crypto: various allocation savings regarding tx handling
* core/txlist, txpool: save a reheap operation, avoid some bigint allocs
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Reverting because this change started handling account balances as
uint64 in the transaction pool, which is incorrect.
This reverts commit af5c97aebe1d37486635521ef553cb8bd4bada13.
# Conflicts:
# core/types/transaction.go
This change further improves the performance of RLP encoding by removing
allocations for big.Int and [...]byte types. I have added a new benchmark
that measures RLP encoding of types.Block to verify that performance is
improved.
# Conflicts:
# core/types/block_test.go
# rlp/encode.go
# rlp/encode_test.go
* core: use uint64 for total tx costs instead of big.Int
* core: added local tx pool test case
* core, crypto: various allocation savings regarding tx handling
* Update core/tx_list.go
* core: added tx.GasPriceIntCmp for comparison without allocation
adds a method to remove unneeded allocation in comparison to tx.gasPrice
* core: handle pools full of locals better
* core/tests: benchmark for tx_list
* core/txlist, txpool: save a reheap operation, avoid some bigint allocs
Co-authored-by: Martin Holst Swende <martin@swende.se>
# Conflicts:
# common/math/integer.go
# core/tx_list.go
# core/tx_pool.go
# core/types/transaction.go
* core, crypto: various allocation savings regarding tx handling
* core: reduce allocs for gas price comparison
This change reduces the allocations needed for comparing different transactions to each other.
A call to `tx.GasPrice()` copies the gas price as it has to be safe against modifications and
also needs to be threadsafe. For comparing and ordering different transactions we don't need
these guarantees
* core: added tx.GasPriceIntCmp for comparison without allocation
adds a method to remove unneeded allocation in comparison to tx.gasPrice
* core/types: pool legacykeccak256 objects in rlpHash
rlpHash is by far the most used function in core that allocates a legacyKeccak256 object on each call.
Since it is so widely used it makes sense to add pooling here so we relieve the GC.
On my machine these changes result in > 100 MILLION less allocations and > 30 GB less allocated memory.
* reverted some changes
* reverted some changes
* trie: use crypto.KeccakState instead of replicating code
Co-authored-by: Martin Holst Swende <martin@swende.se>
# Conflicts:
# core/tx_list.go
# core/tx_pool.go
# core/types/block.go
# core/types/transaction.go
# trie/committer.go
# trie/hasher.go
