erigon-pulse/common/fixedgas/protocol.go
hexoscott 8969b9c58f
txpool changes for eip-3860 (#820)
shanghai changes to txpool.

intrinsic gas updated to match the new version in Erigon.

unsure if the `isShanghai` check is robust enough or there would be a
better way to approach this.
2023-01-16 22:15:42 +00:00

162 lines
11 KiB
Go

/*
Copyright 2021 Erigon contributors
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
package fixedgas
const (
GasLimitBoundDivisor uint64 = 1024 // The bound divisor of the gas limit, used in update calculations.
MinGasLimit uint64 = 5000 // Minimum the gas limit may ever be.
GenesisGasLimit uint64 = 4712388 // Gas limit of the Genesis block.
MaximumExtraDataSize uint64 = 32 // Maximum size extra data may be after Genesis.
ExpByteGas uint64 = 10 // Times ceil(log256(exponent)) for the EXP instruction.
SloadGas uint64 = 50 // Multiplied by the number of 32-byte words that are copied (round up) for any *COPY operation and added.
CallValueTransferGas uint64 = 9000 // Paid for CALL when the value transfer is non-zero.
CallNewAccountGas uint64 = 25000 // Paid for CALL when the destination address didn't exist prior.
TxGas uint64 = 21000 // Per transaction not creating a contract. NOTE: Not payable on data of calls between transactions.
TxGasContractCreation uint64 = 53000 // Per transaction that creates a contract. NOTE: Not payable on data of calls between transactions.
TxDataZeroGas uint64 = 4 // Per byte of data attached to a transaction that equals zero. NOTE: Not payable on data of calls between transactions.
QuadCoeffDiv uint64 = 512 // Divisor for the quadratic particle of the memory cost equation.
LogDataGas uint64 = 8 // Per byte in a LOG* operation's data.
CallStipend uint64 = 2300 // Free gas given at beginning of call.
Sha3Gas uint64 = 30 // Once per SHA3 operation.
Sha3WordGas uint64 = 6 // Once per word of the SHA3 operation's data.
SstoreSetGas uint64 = 20000 // Once per SLOAD operation.
SstoreResetGas uint64 = 5000 // Once per SSTORE operation if the zeroness changes from zero.
SstoreClearGas uint64 = 5000 // Once per SSTORE operation if the zeroness doesn't change.
SstoreRefundGas uint64 = 15000 // Once per SSTORE operation if the zeroness changes to zero.
NetSstoreNoopGas uint64 = 200 // Once per SSTORE operation if the value doesn't change.
NetSstoreInitGas uint64 = 20000 // Once per SSTORE operation from clean zero.
NetSstoreCleanGas uint64 = 5000 // Once per SSTORE operation from clean non-zero.
NetSstoreDirtyGas uint64 = 200 // Once per SSTORE operation from dirty.
NetSstoreClearRefund uint64 = 15000 // Once per SSTORE operation for clearing an originally existing storage slot
NetSstoreResetRefund uint64 = 4800 // Once per SSTORE operation for resetting to the original non-zero value
NetSstoreResetClearRefund uint64 = 19800 // Once per SSTORE operation for resetting to the original zero value
SstoreSentryGasEIP2200 uint64 = 2300 // Minimum gas required to be present for an SSTORE call, not consumed
SstoreSetGasEIP2200 uint64 = 20000 // Once per SSTORE operation from clean zero to non-zero
SstoreResetGasEIP2200 uint64 = 5000 // Once per SSTORE operation from clean non-zero to something else
SstoreClearsScheduleRefundEIP2200 uint64 = 15000 // Once per SSTORE operation for clearing an originally existing storage slot
ColdAccountAccessCostEIP2929 = uint64(2600) // COLD_ACCOUNT_ACCESS_COST
ColdSloadCostEIP2929 = uint64(2100) // COLD_SLOAD_COST
WarmStorageReadCostEIP2929 = uint64(100) // WARM_STORAGE_READ_COST
// In EIP-2200: SstoreResetGas was 5000.
// In EIP-2929: SstoreResetGas was changed to '5000 - COLD_SLOAD_COST'.
// In EIP-3529: SSTORE_CLEARS_SCHEDULE is defined as SSTORE_RESET_GAS + ACCESS_LIST_STORAGE_KEY_COST
// Which becomes: 5000 - 2100 + 1900 = 4800
SstoreClearsScheduleRefundEIP3529 uint64 = SstoreResetGasEIP2200 - ColdSloadCostEIP2929 + TxAccessListStorageKeyGas
JumpdestGas uint64 = 1 // Once per JUMPDEST operation.
EpochDuration uint64 = 30000 // Duration between proof-of-work epochs.
CreateDataGas uint64 = 200 //
CallCreateDepth uint64 = 1024 // Maximum depth of call/create stack.
ExpGas uint64 = 10 // Once per EXP instruction
LogGas uint64 = 375 // Per LOG* operation.
CopyGas uint64 = 3 //
StackLimit uint64 = 1024 // Maximum size of VM stack allowed.
TierStepGas uint64 = 0 // Once per operation, for a selection of them.
LogTopicGas uint64 = 375 // Multiplied by the * of the LOG*, per LOG transaction. e.g. LOG0 incurs 0 * c_txLogTopicGas, LOG4 incurs 4 * c_txLogTopicGas.
CreateGas uint64 = 32000 // Once per CREATE operation & contract-creation transaction.
Create2Gas uint64 = 32000 // Once per CREATE2 operation
SelfdestructRefundGas uint64 = 24000 // Refunded following a selfdestruct operation.
MemoryGas uint64 = 3 // Times the address of the (highest referenced byte in memory + 1). NOTE: referencing happens on read, write and in instructions such as RETURN and CALL.
TxDataNonZeroGasFrontier uint64 = 68 // Per byte of data attached to a transaction that is not equal to zero. NOTE: Not payable on data of calls between transactions.
TxDataNonZeroGasEIP2028 uint64 = 16 // Per byte of non zero data attached to a transaction after EIP 2028 (part in Istanbul)
TxAccessListAddressGas uint64 = 2400 // Per address specified in EIP 2930 access list
TxAccessListStorageKeyGas uint64 = 1900 // Per storage key specified in EIP 2930 access list
// These have been changed during the course of the chain
CallGasFrontier uint64 = 40 // Once per CALL operation & message call transaction.
CallGasEIP150 uint64 = 700 // Static portion of gas for CALL-derivates after EIP 150 (Tangerine)
BalanceGasFrontier uint64 = 20 // The cost of a BALANCE operation
BalanceGasEIP150 uint64 = 400 // The cost of a BALANCE operation after Tangerine
BalanceGasEIP1884 uint64 = 700 // The cost of a BALANCE operation after EIP 1884 (part of Istanbul)
ExtcodeSizeGasFrontier uint64 = 20 // Cost of EXTCODESIZE before EIP 150 (Tangerine)
ExtcodeSizeGasEIP150 uint64 = 700 // Cost of EXTCODESIZE after EIP 150 (Tangerine)
SloadGasFrontier uint64 = 50
SloadGasEIP150 uint64 = 200
SloadGasEIP1884 uint64 = 800 // Cost of SLOAD after EIP 1884 (part of Istanbul)
SloadGasEIP2200 uint64 = 800 // Cost of SLOAD after EIP 2200 (part of Istanbul)
ExtcodeHashGasConstantinople uint64 = 400 // Cost of EXTCODEHASH (introduced in Constantinople)
ExtcodeHashGasEIP1884 uint64 = 700 // Cost of EXTCODEHASH after EIP 1884 (part in Istanbul)
SelfdestructGasEIP150 uint64 = 5000 // Cost of SELFDESTRUCT post EIP 150 (Tangerine)
// EXP has a dynamic portion depending on the size of the exponent
ExpByteFrontier uint64 = 10 // was set to 10 in Frontier
ExpByteEIP158 uint64 = 50 // was raised to 50 during Eip158 (Spurious Dragon)
// Extcodecopy has a dynamic AND a static cost. This represents only the
// static portion of the gas. It was changed during EIP 150 (Tangerine)
ExtcodeCopyBaseFrontier uint64 = 20
ExtcodeCopyBaseEIP150 uint64 = 700
// CreateBySelfdestructGas is used when the refunded account is one that does
// not exist. This logic is similar to call.
// Introduced in Tangerine Whistle (Eip 150)
CreateBySelfdestructGas uint64 = 25000
BaseFeeChangeDenominator = 8 // Bounds the amount the base fee can change between blocks.
ElasticityMultiplier = 2 // Bounds the maximum gas limit an EIP-1559 block may have.
InitialBaseFee = 1000000000 // Initial base fee for EIP-1559 blocks.
MaxCodeSize = 24576 // Maximum bytecode to permit for a contract
// Precompiled contract gas prices
EcrecoverGas uint64 = 3000 // Elliptic curve sender recovery gas price
Sha256BaseGas uint64 = 60 // Base price for a SHA256 operation
Sha256PerWordGas uint64 = 12 // Per-word price for a SHA256 operation
Ripemd160BaseGas uint64 = 600 // Base price for a RIPEMD160 operation
Ripemd160PerWordGas uint64 = 120 // Per-word price for a RIPEMD160 operation
IdentityBaseGas uint64 = 15 // Base price for a data copy operation
IdentityPerWordGas uint64 = 3 // Per-work price for a data copy operation
Bn256AddGasByzantium uint64 = 500 // Byzantium gas needed for an elliptic curve addition
Bn256AddGasIstanbul uint64 = 150 // Gas needed for an elliptic curve addition
Bn256ScalarMulGasByzantium uint64 = 40000 // Byzantium gas needed for an elliptic curve scalar multiplication
Bn256ScalarMulGasIstanbul uint64 = 6000 // Gas needed for an elliptic curve scalar multiplication
Bn256PairingBaseGasByzantium uint64 = 100000 // Byzantium base price for an elliptic curve pairing check
Bn256PairingBaseGasIstanbul uint64 = 45000 // Base price for an elliptic curve pairing check
Bn256PairingPerPointGasByzantium uint64 = 80000 // Byzantium per-point price for an elliptic curve pairing check
Bn256PairingPerPointGasIstanbul uint64 = 34000 // Per-point price for an elliptic curve pairing check
Bls12381G1AddGas uint64 = 600 // Price for BLS12-381 elliptic curve G1 point addition
Bls12381G1MulGas uint64 = 12000 // Price for BLS12-381 elliptic curve G1 point scalar multiplication
Bls12381G2AddGas uint64 = 4500 // Price for BLS12-381 elliptic curve G2 point addition
Bls12381G2MulGas uint64 = 55000 // Price for BLS12-381 elliptic curve G2 point scalar multiplication
Bls12381PairingBaseGas uint64 = 115000 // Base gas price for BLS12-381 elliptic curve pairing check
Bls12381PairingPerPairGas uint64 = 23000 // Per-point pair gas price for BLS12-381 elliptic curve pairing check
Bls12381MapG1Gas uint64 = 5500 // Gas price for BLS12-381 mapping field element to G1 operation
Bls12381MapG2Gas uint64 = 110000 // Gas price for BLS12-381 mapping field element to G2 operation
// The Refund Quotient is the cap on how much of the used gas can be refunded. Before EIP-3529,
// up to half the consumed gas could be refunded. Redefined as 1/5th in EIP-3529
RefundQuotient uint64 = 2
RefundQuotientEIP3529 uint64 = 5
// EIP-3860 to limit size of initcode
MaxInitCodeSize = 2 * MaxCodeSize // Maximum initcode to permit in a creation transaction and create instructions
InitCodeWordGas = 2
)