mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2025-04-12 06:49:52 +00:00
Code Issues Packages Projects Releases Wiki Activity

regulator: pca9450: Handle hardware with fixed SD_VSEL for LDO5

Browse Source 
There are two ways to set the output voltage of the LD05
regulator. First by writing to the voltage selection registers
and second by toggling the SD_VSEL signal.

Usually board designers connect SD_VSEL to the VSELECT signal
controlled by the USDHC controller, but in some cases the
signal is hardwired to a fixed low level (therefore selecting
3.3V as initial value for allowing to boot from the SD card).

In these cases, the voltage is only determined by the value
of the LDO5CTRL_L register. Introduce a property
nxp,sd-vsel-fixed-low to let the driver know that SD_VSEL
is low and there is no GPIO to actually get that
information from dynamically.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://patch.msgid.link/20250303132258.50204-1-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Frieder Schrempf 2025-03-03 14:22:54 +01:00 committed by Mark Brown
parent 1455f0badd
commit c8c1ab2c5c
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
1 changed files with 7 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
drivers/regulator/pca9450-regulator.c
View File

@ -36,6 +36,7 @@ struct pca9450 {
enum pca9450_chip_type type;
unsigned int rcnt;
int irq;
bool sd_vsel_fixed_low;
};
static const struct regmap_range pca9450_status_range = {
@ -102,6 +103,9 @@ static unsigned int pca9450_ldo5_get_reg_voltage_sel(struct regulator_dev *rdev)
{
struct pca9450 *pca9450 = rdev_get_drvdata(rdev);
if (pca9450->sd_vsel_fixed_low)
return PCA9450_REG_LDO5CTRL_L;
if (pca9450->sd_vsel_gpio && !gpiod_get_value(pca9450->sd_vsel_gpio))
return PCA9450_REG_LDO5CTRL_L;
@ -1100,6 +1104,9 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
return ret;
}
pca9450->sd_vsel_fixed_low =
of_property_read_bool(ldo5->dev.of_node, "nxp,sd-vsel-fixed-low");
dev_info(&i2c->dev, "%s probed.\n",
type == PCA9450_TYPE_PCA9450A ? "pca9450a" :
(type == PCA9450_TYPE_PCA9451A ? "pca9451a" : "pca9450bc"));