mirror of
https://github.com/torvalds/linux.git
synced 2025-04-09 14:45:27 +00:00
512 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Nam Cao
|
c97f85ddd6 |
KVM: MIPS: Switch to use hrtimer_setup()
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Patch was created by using Coccinelle. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/34004267eba24388fb50ef6de1b8dd7addba6475.1738746821.git.namcao@linutronix.de |
||
|
Sean Christopherson
|
7e8f1aa59d |
KVM: MIPS: Use kvm_faultin_pfn() to map pfns into the guest
Convert MIPS to kvm_faultin_pfn()+kvm_release_faultin_page(), which are new APIs to consolidate arch code and provide consistent behavior across all KVM architectures. Signed-off-by: Sean Christopherson <seanjc@google.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20241010182427.1434605-73-seanjc@google.com> |
||
|
Sean Christopherson
|
13d66fddaa |
KVM: MIPS: Mark "struct page" pfns accessed prior to dropping mmu_lock
Mark pages accessed before dropping mmu_lock when faulting in guest memory so that MIPS can convert to kvm_release_faultin_page() without tripping its lockdep assertion on mmu_lock being held. Signed-off-by: Sean Christopherson <seanjc@google.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20241010182427.1434605-72-seanjc@google.com> |
||
|
Sean Christopherson
|
4d75f14fc8 |
KVM: MIPS: Mark "struct page" pfns accessed only in "slow" page fault path
Mark pages accessed only in the slow page fault path in order to remove an unnecessary user of kvm_pfn_to_refcounted_page(). Marking pages accessed in the primary MMU during KVM page fault handling isn't harmful, but it's largely pointless and likely a waste of a cycles since the primary MMU will call into KVM via mmu_notifiers when aging pages. I.e. KVM participates in a "pull" model, so there's no need to also "push" updates. Signed-off-by: Sean Christopherson <seanjc@google.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20241010182427.1434605-71-seanjc@google.com> |
||
|
Sean Christopherson
|
d8f4cda748 |
KVM: MIPS: Mark "struct page" pfns dirty only in "slow" page fault path
Mark pages/folios dirty only the slow page fault path, i.e. only when mmu_lock is held and the operation is mmu_notifier-protected, as marking a page/folio dirty after it has been written back can make some filesystems unhappy (backing KVM guests will such filesystem files is uncommon, and the race is minuscule, hence the lack of complaints). See the link below for details. Link: https://lore.kernel.org/all/cover.1683044162.git.lstoakes@gmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20241010182427.1434605-70-seanjc@google.com> |
||
|
Sean Christopherson
|
5381eca101 |
KVM: MIPS: Rename virtualization {en,dis}abling APIs to match common KVM
Rename MIPS's trampoline hooks for virtualization enabling to match the recently renamed arch hooks. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240830043600.127750-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
071f24ad28 |
KVM: Rename arch hooks related to per-CPU virtualization enabling
Rename the per-CPU hooks used to enable virtualization in hardware to align with the KVM-wide helpers in kvm_main.c, and to better capture that the callbacks are invoked on every online CPU. No functional change intended. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-ID: <20240830043600.127750-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Linus Torvalds
|
2c9b351240 |
ARM:
* Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
* Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
* Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of
the protocol
* FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
* New command-line parameter to control the WFx trap behavior under KVM
* Introduce kCFI hardening in the EL2 hypervisor
* Fixes + cleanups for handling presence/absence of FEAT_TCRX
* Miscellaneous fixes + documentation updates
LoongArch:
* Add paravirt steal time support.
* Add support for KVM_DIRTY_LOG_INITIALLY_SET.
* Add perf kvm-stat support for loongarch.
RISC-V:
* Redirect AMO load/store access fault traps to guest
* perf kvm stat support
* Use guest files for IMSIC virtualization, when available
ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA
extensions is coming through the RISC-V tree.
s390:
* Assortment of tiny fixes which are not time critical
x86:
* Fixes for Xen emulation.
* Add a global struct to consolidate tracking of host values, e.g. EFER
* Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
* Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
* Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
* Drop MTRR virtualization, and instead always honor guest PAT on CPUs
that support self-snoop.
* Update to the newfangled Intel CPU FMS infrastructure.
* Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads
'0' and writes from userspace are ignored.
* Misc cleanups
x86 - MMU:
* Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support.
* Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't
hold leafs SPTEs.
* Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager
page splitting, to avoid stalling vCPUs when splitting huge pages.
* Bug the VM instead of simply warning if KVM tries to split a SPTE that is
non-present or not-huge. KVM is guaranteed to end up in a broken state
because the callers fully expect a valid SPTE, it's all but dangerous
to let more MMU changes happen afterwards.
x86 - AMD:
* Make per-CPU save_area allocations NUMA-aware.
* Force sev_es_host_save_area() to be inlined to avoid calling into an
instrumentable function from noinstr code.
* Base support for running SEV-SNP guests. API-wise, this includes
a new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated pages
before mapping them into guest private memory ranges.
This includes basic support for attestation guest requests, enough to
say that KVM supports the GHCB 2.0 specification.
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys. To support
fetching certificate data from userspace, a new KVM exit type will be
needed to handle fetching the certificate from userspace. An attempt to
define a new KVM_EXIT_COCO/KVM_EXIT_COCO_REQ_CERTS exit type to handle
this was introduced in v1 of this patchset, but is still being discussed
by community, so for now this patchset only implements a stub version
of SNP Extended Guest Requests that does not provide certificate data.
x86 - Intel:
* Remove an unnecessary EPT TLB flush when enabling hardware.
* Fix a series of bugs that cause KVM to fail to detect nested pending posted
interrupts as valid wake eents for a vCPU executing HLT in L2 (with
HLT-exiting disable by L1).
* KVM: x86: Suppress MMIO that is triggered during task switch emulation
Explicitly suppress userspace emulated MMIO exits that are triggered when
emulating a task switch as KVM doesn't support userspace MMIO during
complex (multi-step) emulation. Silently ignoring the exit request can
result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to
userspace for some other reason prior to purging mmio_needed.
See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write exits if
emulator detects exception") for more details on KVM's limitations with
respect to emulated MMIO during complex emulator flows.
Generic:
* Rename the AS_UNMOVABLE flag that was introduced for KVM to AS_INACCESSIBLE,
because the special casing needed by these pages is not due to just
unmovability (and in fact they are only unmovable because the CPU cannot
access them).
* New ioctl to populate the KVM page tables in advance, which is useful to
mitigate KVM page faults during guest boot or after live migration.
The code will also be used by TDX, but (probably) not through the ioctl.
* Enable halt poll shrinking by default, as Intel found it to be a clear win.
* Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
* Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
* Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
* Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
Selftests:
* Remove dead code in the memslot modification stress test.
* Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs.
* Print the guest pseudo-RNG seed only when it changes, to avoid spamming the
log for tests that create lots of VMs.
* Make the PMU counters test less flaky when counting LLC cache misses by
doing CLFLUSH{OPT} in every loop iteration.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaZQB0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNkZwf/bv2jiENaLFNGPe/VqTKMQ6PHQLMG
+sNHx6fJPP35gTM8Jqf0/7/ummZXcSuC1mWrzYbecZm7Oeg3vwNXHZ4LquwwX6Dv
8dKcUzLbWDAC4WA3SKhi8C8RV2v6E7ohy69NtAJmFWTc7H95dtIQm6cduV2osTC3
OEuHe1i8d9umk6couL9Qhm8hk3i9v2KgCsrfyNrQgLtS3hu7q6yOTR8nT0iH6sJR
KE5A8prBQgLmF34CuvYDw4Hu6E4j+0QmIqodovg2884W1gZQ9LmcVqYPaRZGsG8S
iDdbkualLKwiR1TpRr3HJGKWSFdc7RblbsnHRvHIZgFsMQiimh4HrBSCyQ==
=zepX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write
exits if emulator detects exception") for more details on KVM's
limitations with respect to emulated MMIO during complex emulator
flows
Generic:
- Rename the AS_UNMOVABLE flag that was introduced for KVM to
AS_INACCESSIBLE, because the special casing needed by these pages
is not due to just unmovability (and in fact they are only
unmovable because the CPU cannot access them)
- New ioctl to populate the KVM page tables in advance, which is
useful to mitigate KVM page faults during guest boot or after live
migration. The code will also be used by TDX, but (probably) not
through the ioctl
- Enable halt poll shrinking by default, as Intel found it to be a
clear win
- Setup empty IRQ routing when creating a VM to avoid having to
synchronize SRCU when creating a split IRQCHIP on x86
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with
a flag that arch code can use for hooking both sched_in() and
sched_out()
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace
detect bugs
- Mark a vCPU as preempted if and only if it's scheduled out while in
the KVM_RUN loop, e.g. to avoid marking it preempted and thus
writing guest memory when retrieving guest state during live
migration blackout
Selftests:
- Remove dead code in the memslot modification stress test
- Treat "branch instructions retired" as supported on all AMD Family
17h+ CPUs
- Print the guest pseudo-RNG seed only when it changes, to avoid
spamming the log for tests that create lots of VMs
- Make the PMU counters test less flaky when counting LLC cache
misses by doing CLFLUSH{OPT} in every loop iteration"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
crypto: ccp: Add the SNP_VLEK_LOAD command
KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
KVM: x86: Replace static_call_cond() with static_call()
KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event
x86/sev: Move sev_guest.h into common SEV header
KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event
KVM: x86: Suppress MMIO that is triggered during task switch emulation
KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro
KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE
KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory
KVM: Document KVM_PRE_FAULT_MEMORY ioctl
mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE
perf kvm: Add kvm-stat for loongarch64
LoongArch: KVM: Add PV steal time support in guest side
...
|
||
|
David Matlack
|
a6816314af |
KVM: Introduce vcpu->wants_to_run
Introduce vcpu->wants_to_run to indicate when a vCPU is in its core run loop, i.e. when the vCPU is running the KVM_RUN ioctl and immediate_exit was not set. Replace all references to vcpu->run->immediate_exit with !vcpu->wants_to_run to avoid TOCTOU races with userspace. For example, a malicious userspace could invoked KVM_RUN with immediate_exit=true and then after KVM reads it to set wants_to_run=false, flip it to false. This would result in the vCPU running in KVM_RUN with wants_to_run=false. This wouldn't cause any real bugs today but is a dangerous landmine. Signed-off-by: David Matlack <dmatlack@google.com> Link: https://lore.kernel.org/r/20240503181734.1467938-2-dmatlack@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Jiaxun Yang
|
4ba491dd3b |
MIPS: kvm: Declare prototype for kvm_init_loongson_ipi
Declear prototype for kvm_init_loongson_ipi in interrupt.h.
Fix warning:
arch/mips/kvm/loongson_ipi.c:190:6: warning: no previous prototype for ‘kvm_init_loongson_ipi’ [-Wmissing-prototypes]
190 | void kvm_init_loongson_ipi(struct kvm *kvm)
| ^~~~~~~~~~~~~~~~~~~~~
Fixes: f21db3090de2 ("KVM: MIPS: Add Loongson-3 Virtual IPI interrupt support")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
||
|
Paolo Bonzini
|
f3b65bbaed |
KVM: delete .change_pte MMU notifier callback
The .change_pte() MMU notifier callback was intended as an
optimization. The original point of it was that KSM could tell KVM to flip
its secondary PTE to a new location without having to first zap it. At
the time there was also an .invalidate_page() callback; both of them were
*not* bracketed by calls to mmu_notifier_invalidate_range_{start,end}(),
and .invalidate_page() also doubled as a fallback implementation of
.change_pte().
Later on, however, both callbacks were changed to occur within an
invalidate_range_start/end() block.
In the case of .change_pte(), commit 6bdb913f0a70 ("mm: wrap calls to
set_pte_at_notify with invalidate_range_start and invalidate_range_end",
2012-10-09) did so to remove the fallback from .invalidate_page() to
.change_pte() and allow sleepable .invalidate_page() hooks.
This however made KVM's usage of the .change_pte() callback completely
moot, because KVM unmaps the sPTEs during .invalidate_range_start()
and therefore .change_pte() has no hope of finding a sPTE to change.
Drop the generic KVM code that dispatches to kvm_set_spte_gfn(), as
well as all the architecture specific implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240405115815.3226315-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
||
|
Linus Torvalds
|
4f712ee0cb |
S390:
* Changes to FPU handling came in via the main s390 pull request
* Only deliver to the guest the SCLP events that userspace has
requested.
* More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same).
* Fix selftests undefined behavior.
x86:
* Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can be
programmed *using the architectural encoding*. The enumeration does
NOT say anything about the encoding when the CPU doesn't report support
the event *in general*. It might support it, and it might support it
using the same encoding that made it into the architectural PMU spec.
* Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly emulates
RDMPC, counter availability, and a variety of other PMC-related
behaviors that depend on guest CPUID and therefore are easier to
validate with selftests than with custom guests (aka kvm-unit-tests).
* Zero out PMU state on AMD if the virtual PMU is disabled, it does not
cause any bug but it wastes time in various cases where KVM would check
if a PMC event needs to be synthesized.
* Optimize triggering of emulated events, with a nice ~10% performance
improvement in VM-Exit microbenchmarks when a vPMU is exposed to the
guest.
* Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
* Fix a bug where KVM would report stale/bogus exit qualification information
when exiting to userspace with an internal error exit code.
* Add a VMX flag in /proc/cpuinfo to report 5-level EPT support.
* Rework TDP MMU root unload, free, and alloc to run with mmu_lock held for
read, e.g. to avoid serializing vCPUs when userspace deletes a memslot.
* Tear down TDP MMU page tables at 4KiB granularity (used to be 1GiB). KVM
doesn't support yielding in the middle of processing a zap, and 1GiB
granularity resulted in multi-millisecond lags that are quite impolite
for CONFIG_PREEMPT kernels.
* Allocate write-tracking metadata on-demand to avoid the memory overhead when
a kernel is built with i915 virtualization support but the workloads use
neither shadow paging nor i915 virtualization.
* Explicitly initialize a variety of on-stack variables in the emulator that
triggered KMSAN false positives.
* Fix the debugregs ABI for 32-bit KVM.
* Rework the "force immediate exit" code so that vendor code ultimately decides
how and when to force the exit, which allowed some optimization for both
Intel and AMD.
* Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if
vCPU creation ultimately failed, causing extra unnecessary work.
* Cleanup the logic for checking if the currently loaded vCPU is in-kernel.
* Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere in the
kernel) are detected earlier and are less likely to hang the kernel.
x86 Xen emulation:
* Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the
gpa but the underlying host virtual address remains the same.
* When possible, use a single host TSC value when computing the deadline for
Xen timers in order to improve the accuracy of the timer emulation.
* Inject pending upcall events when the vCPU software-enables its APIC to fix
a bug where an upcall can be lost (and to follow Xen's behavior).
* Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen
events fails, e.g. if the guest has aliased xAPIC IDs.
RISC-V:
* Support exception and interrupt handling in selftests
* New self test for RISC-V architectural timer (Sstc extension)
* New extension support (Ztso, Zacas)
* Support userspace emulation of random number seed CSRs.
ARM:
* Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
* Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
* Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
* Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
* Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
* Misc cleanups and fixes as usual.
Generic:
* cleanup Kconfig by removing CONFIG_HAVE_KVM, which was basically always
true on all architectures except MIPS (where Kconfig determines the
available depending on CPU capabilities). It is replaced either by
an architecture-dependent symbol for MIPS, and IS_ENABLED(CONFIG_KVM)
everywhere else.
* Factor common "select" statements in common code instead of requiring
each architecture to specify it
* Remove thoroughly obsolete APIs from the uapi headers.
* Move architecture-dependent stuff to uapi/asm/kvm.h
* Always flush the async page fault workqueue when a work item is being
removed, especially during vCPU destruction, to ensure that there are no
workers running in KVM code when all references to KVM-the-module are gone,
i.e. to prevent a very unlikely use-after-free if kvm.ko is unloaded.
* Grab a reference to the VM's mm_struct in the async #PF worker itself instead
of gifting the worker a reference, so that there's no need to remember
to *conditionally* clean up after the worker.
Selftests:
* Reduce boilerplate especially when utilize selftest TAP infrastructure.
* Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
* Fix benign bugs where tests neglect to close() guest_memfd files.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmX0iP8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroND7wf+JZoNvwZ+bmwWe/4jn/YwNoYi/C5z
eypn8M1gsWEccpCpqPBwznVm9T29rF4uOlcMvqLEkHfTpaL1EKUUjP1lXPz/ileP
6a2RdOGxAhyTiFC9fjy+wkkjtLbn1kZf6YsS0hjphP9+w0chNbdn0w81dFVnXryd
j7XYI8R/bFAthNsJOuZXSEjCfIHxvTTG74OrTf1B1FEBB+arPmrgUeJftMVhffQK
Sowgg8L/Ii/x6fgV5NZQVSIyVf1rp8z7c6UaHT4Fwb0+RAMW8p9pYv9Qp1YkKp8y
5j0V9UzOHP7FRaYimZ5BtwQoqiZXYylQ+VuU/Y2f4X85cvlLzSqxaEMAPA==
=mqOV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
||
|
Jiaxun Yang
|
881c8e055d |
MIPS: kvm/entry: Use GPR number macros
Use GPR number macros in uasm code generation parts to reduce code duplication. No functional change. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Jiaxun Yang
|
a77dabc8e8 |
MIPS: Unify define of CP0 registers for uasm code
Definitions of uasm variant of CP0 registers are unified to mipsregs.h, so they lay together with uasm variant of the code. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Paolo Bonzini
|
687d8f4c3d |
Merge branch 'kvm-kconfig'
Cleanups to Kconfig definitions for KVM * replace HAVE_KVM with an architecture-dependent symbol, when CONFIG_KVM may or may not be available depending on CPU capabilities (MIPS) * replace HAVE_KVM with IS_ENABLED(CONFIG_KVM) for host-side code that is not part of the KVM module, so that it is completely compiled out * factor common "select" statements in common code instead of requiring each architecture to specify it |
||
|
Paolo Bonzini
|
a6d5433801 |
MIPS: introduce Kconfig for MIPS VZ
Since MIPS/KVM only supports hardware virtualization using MIPS VZ, do not enable KVM blindly. Use a new Kconfig symbol CPU_SUPPORTS_VZ and do not enable it for R2 processors. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
8886640dad |
kvm: replace __KVM_HAVE_READONLY_MEM with Kconfig symbol
KVM uses __KVM_HAVE_* symbols in the architecture-dependent uapi/asm/kvm.h to mask unused definitions in include/uapi/linux/kvm.h. __KVM_HAVE_READONLY_MEM however was nothing but a misguided attempt to define KVM_CAP_READONLY_MEM only on architectures where KVM_CHECK_EXTENSION(KVM_CAP_READONLY_MEM) could possibly return nonzero. This however does not make sense, and it prevented userspace from supporting this architecture-independent feature without recompilation. Therefore, these days __KVM_HAVE_READONLY_MEM does not mask anything and is only used in virt/kvm/kvm_main.c. Userspace does not need to test it and there should be no need for it to exist. Remove it and replace it with a Kconfig symbol within Linux source code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Linus Torvalds
|
09d1c6a80f |
Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
||
|
Paolo Bonzini
|
caadf876bb |
KVM: introduce CONFIG_KVM_COMMON
CONFIG_HAVE_KVM is currently used by some architectures to either
enabled the KVM config proper, or to enable host-side code that is
not part of the KVM module. However, CONFIG_KVM's "select" statement
in virt/kvm/Kconfig corresponds to a third meaning, namely to
enable common Kconfigs required by all architectures that support
KVM.
These three meanings can be replaced respectively by an
architecture-specific Kconfig, by IS_ENABLED(CONFIG_KVM), or by
a new Kconfig symbol that is in turn selected by the
architecture-specific "config KVM".
Start by introducing such a new Kconfig symbol, CONFIG_KVM_COMMON.
Unlike CONFIG_HAVE_KVM, it is selected by CONFIG_KVM, not by
architecture code, and it brings in all dependencies of common
KVM code. In particular, INTERVAL_TREE was missing in loongarch
and riscv, so that is another thing that is fixed.
Fixes: 8132d887a702 ("KVM: remove CONFIG_HAVE_KVM_EVENTFD", 2023-12-08)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/44907c6b-c5bd-4e4a-a921-e4d3825539d8@infradead.org/
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
||
|
Bjorn Helgaas
|
2f9060b1db |
MIPS: Fix typos
Fix typos, most reported by "codespell arch/mips". Only touches comments, no code changes. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-mips@vger.kernel.org Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Paolo Bonzini
|
8132d887a7 |
KVM: remove CONFIG_HAVE_KVM_EVENTFD
virt/kvm/eventfd.c is compiled unconditionally, meaning that the ioeventfds member of struct kvm is accessed unconditionally. CONFIG_HAVE_KVM_EVENTFD therefore must be defined for KVM common code to compile successfully, remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
f128cf8cfb |
KVM: Convert KVM_ARCH_WANT_MMU_NOTIFIER to CONFIG_KVM_GENERIC_MMU_NOTIFIER
Convert KVM_ARCH_WANT_MMU_NOTIFIER into a Kconfig and select it where appropriate to effectively maintain existing behavior. Using a proper Kconfig will simplify building more functionality on top of KVM's mmu_notifier infrastructure. Add a forward declaration of kvm_gfn_range to kvm_types.h so that including arch/powerpc/include/asm/kvm_ppc.h's with CONFIG_KVM=n doesn't generate warnings due to kvm_gfn_range being undeclared. PPC defines hooks for PR vs. HV without guarding them via #ifdeffery, e.g. bool (*unmap_gfn_range)(struct kvm *kvm, struct kvm_gfn_range *range); bool (*age_gfn)(struct kvm *kvm, struct kvm_gfn_range *range); bool (*test_age_gfn)(struct kvm *kvm, struct kvm_gfn_range *range); bool (*set_spte_gfn)(struct kvm *kvm, struct kvm_gfn_range *range); Alternatively, PPC could forward declare kvm_gfn_range, but there's no good reason not to define it in common KVM. Acked-by: Anup Patel <anup@brainfault.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fuad Tabba <tabba@google.com> Tested-by: Fuad Tabba <tabba@google.com> Message-Id: <20231027182217.3615211-8-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
e2145c99b5 |
KVM: MIPS: fix -Wunused-but-set-variable warning
The variable is completely unused, remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
0d15bf966d |
Common KVM changes for 6.6:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
- Drop unused function declarations
-----BEGIN PGP SIGNATURE-----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=n819
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.6' of https://github.com/kvm-x86/linux into HEAD
Common KVM changes for 6.6:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
- Drop unused function declarations
|
||
|
Sean Christopherson
|
3e1efe2b67 |
KVM: Wrap kvm_{gfn,hva}_range.pte in a per-action union
Wrap kvm_{gfn,hva}_range.pte in a union so that future notifier events can
pass event specific information up and down the stack without needing to
constantly expand and churn the APIs. Lockless aging of SPTEs will pass
around a bitmap, and support for memory attributes will pass around the
new attributes for the range.
Add a "KVM_NO_ARG" placeholder to simplify handling events without an
argument (creating a dummy union variable is midly annoying).
Opportunstically drop explicit zero-initialization of the "pte" field, as
omitting the field (now a union) has the same effect.
Cc: Yu Zhao <yuzhao@google.com>
Link: https://lore.kernel.org/all/CAOUHufagkd2Jk3_HrVoFFptRXM=hX2CV8f+M-dka-hJU4bP8kw@mail.gmail.com
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Yu Zhao <yuzhao@google.com>
Link: https://lore.kernel.org/r/20230729004144.1054885-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
||
|
David Matlack
|
619b507244 |
KVM: Move kvm_arch_flush_remote_tlbs_memslot() to common code
Move kvm_arch_flush_remote_tlbs_memslot() to common code and drop "arch_" from the name. kvm_arch_flush_remote_tlbs_memslot() is just a range-based TLB invalidation where the range is defined by the memslot. Now that kvm_flush_remote_tlbs_range() can be called from common code we can just use that and drop a bunch of duplicate code from the arch directories. Note this adds a lockdep assertion for slots_lock being held when calling kvm_flush_remote_tlbs_memslot(), which was previously only asserted on x86. MIPS has calls to kvm_flush_remote_tlbs_memslot(), but they all hold the slots_lock, so the lockdep assertion continues to hold true. Also drop the CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT ifdef gating kvm_flush_remote_tlbs_memslot(), since it is no longer necessary. Signed-off-by: David Matlack <dmatlack@google.com> Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Acked-by: Anup Patel <anup@brainfault.org> Acked-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230811045127.3308641-7-rananta@google.com |
||
|
David Matlack
|
a1342c8027 |
KVM: Rename kvm_arch_flush_remote_tlb() to kvm_arch_flush_remote_tlbs()
Rename kvm_arch_flush_remote_tlb() and the associated macro __KVM_HAVE_ARCH_FLUSH_REMOTE_TLB to kvm_arch_flush_remote_tlbs() and __KVM_HAVE_ARCH_FLUSH_REMOTE_TLBS respectively. Making the name plural matches kvm_flush_remote_tlbs() and makes it more clear that this function can affect more than one remote TLB. No functional change intended. Signed-off-by: David Matlack <dmatlack@google.com> Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Acked-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230811045127.3308641-2-rananta@google.com |
||
|
Thomas Bogendoerfer
|
3a6dbb6917 |
MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
Commit e4de20576986 ("MIPS: KVM: Fix NULL pointer dereference") missed
converting one place accessing cop0 registers, which results in a build
error, if KVM_MIPS_DEBUG_COP0_COUNTERS is enabled.
Fixes: e4de20576986 ("MIPS: KVM: Fix NULL pointer dereference")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
||
|
Huacai Chen
|
e4de205769 |
MIPS: KVM: Fix NULL pointer dereference
After commit 45c7e8af4a5e3f0bea4ac209 ("MIPS: Remove KVM_TE support") we
get a NULL pointer dereference when creating a KVM guest:
[ 146.243409] Starting KVM with MIPS VZ extensions
[ 149.849151] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000300, epc == ffffffffc06356ec, ra == ffffffffc063568c
[ 149.849177] Oops[#1]:
[ 149.849182] CPU: 3 PID: 2265 Comm: qemu-system-mip Not tainted 6.4.0-rc3+ #1671
[ 149.849188] Hardware name: THTF CX TL630 Series/THTF-LS3A4000-7A1000-ML4A, BIOS KL4.1F.TF.D.166.201225.R 12/25/2020
[ 149.849192] $ 0 : 0000000000000000 000000007400cce0 0000000000400004 ffffffff8119c740
[ 149.849209] $ 4 : 000000007400cce1 000000007400cce1 0000000000000000 0000000000000000
[ 149.849221] $ 8 : 000000240058bb36 ffffffff81421ac0 0000000000000000 0000000000400dc0
[ 149.849233] $12 : 9800000102a07cc8 ffffffff80e40e38 0000000000000001 0000000000400dc0
[ 149.849245] $16 : 0000000000000000 9800000106cd0000 9800000106cd0000 9800000100cce000
[ 149.849257] $20 : ffffffffc0632b28 ffffffffc05b31b0 9800000100ccca00 0000000000400000
[ 149.849269] $24 : 9800000106cd09ce ffffffff802f69d0
[ 149.849281] $28 : 9800000102a04000 9800000102a07cd0 98000001106a8000 ffffffffc063568c
[ 149.849293] Hi : 00000335b2111e66
[ 149.849295] Lo : 6668d90061ae0ae9
[ 149.849298] epc : ffffffffc06356ec kvm_vz_vcpu_setup+0xc4/0x328 [kvm]
[ 149.849324] ra : ffffffffc063568c kvm_vz_vcpu_setup+0x64/0x328 [kvm]
[ 149.849336] Status: 7400cce3 KX SX UX KERNEL EXL IE
[ 149.849351] Cause : 1000000c (ExcCode 03)
[ 149.849354] BadVA : 0000000000000300
[ 149.849357] PrId : 0014c004 (ICT Loongson-3)
[ 149.849360] Modules linked in: kvm nfnetlink_queue nfnetlink_log nfnetlink fuse sha256_generic libsha256 cfg80211 rfkill binfmt_misc vfat fat snd_hda_codec_hdmi input_leds led_class snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_pcm snd_timer snd serio_raw xhci_pci radeon drm_suballoc_helper drm_display_helper xhci_hcd ip_tables x_tables
[ 149.849432] Process qemu-system-mip (pid: 2265, threadinfo=00000000ae2982d2, task=0000000038e09ad4, tls=000000ffeba16030)
[ 149.849439] Stack : 9800000000000003 9800000100ccca00 9800000100ccc000 ffffffffc062cef4
[ 149.849453] 9800000102a07d18 c89b63a7ab338e00 0000000000000000 ffffffff811a0000
[ 149.849465] 0000000000000000 9800000106cd0000 ffffffff80e59938 98000001106a8920
[ 149.849476] ffffffff80e57f30 ffffffffc062854c ffffffff811a0000 9800000102bf4240
[ 149.849488] ffffffffc05b0000 ffffffff80e3a798 000000ff78000000 000000ff78000010
[ 149.849500] 0000000000000255 98000001021f7de0 98000001023f0078 ffffffff81434000
[ 149.849511] 0000000000000000 0000000000000000 9800000102ae0000 980000025e92ae28
[ 149.849523] 0000000000000000 c89b63a7ab338e00 0000000000000001 ffffffff8119dce0
[ 149.849535] 000000ff78000010 ffffffff804f3d3c 9800000102a07eb0 0000000000000255
[ 149.849546] 0000000000000000 ffffffff8049460c 000000ff78000010 0000000000000255
[ 149.849558] ...
[ 149.849565] Call Trace:
[ 149.849567] [<ffffffffc06356ec>] kvm_vz_vcpu_setup+0xc4/0x328 [kvm]
[ 149.849586] [<ffffffffc062cef4>] kvm_arch_vcpu_create+0x184/0x228 [kvm]
[ 149.849605] [<ffffffffc062854c>] kvm_vm_ioctl+0x64c/0xf28 [kvm]
[ 149.849623] [<ffffffff805209c0>] sys_ioctl+0xc8/0x118
[ 149.849631] [<ffffffff80219eb0>] syscall_common+0x34/0x58
The root cause is the deletion of kvm_mips_commpage_init() leaves vcpu
->arch.cop0 NULL. So fix it by making cop0 from a pointer to an embedded
object.
Fixes: 45c7e8af4a5e3f0bea4ac209 ("MIPS: Remove KVM_TE support")
Cc: stable@vger.kernel.org
Reported-by: Yu Zhao <yuzhao@google.com>
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
||
|
Linus Torvalds
|
c8c655c34e |
s390:
* More phys_to_virt conversions
* Improvement of AP management for VSIE (nested virtualization)
ARM64:
* Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
* New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
* Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
* A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
* The usual selftest fixes and improvements.
KVM x86 changes for 6.4:
* Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
* Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
* Move AMD_PSFD to cpufeatures.h and purge KVM's definition
* Avoid unnecessary writes+flushes when the guest is only adding new PTEs
* Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s optimizations
when emulating invalidations
* Clean up the range-based flushing APIs
* Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
* Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
* Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
* Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, similar to CPUID features
* Overhaul the vmx_pmu_caps selftest to better validate PERF_CAPABILITIES
* Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
x86 AMD:
* Add support for virtual NMIs
* Fixes for edge cases related to virtual interrupts
x86 Intel:
* Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
* Fix a bug in emulation of ENCLS in compatibility mode
* Allow emulation of NOP and PAUSE for L2
* AMX selftests improvements
* Misc cleanups
MIPS:
* Constify MIPS's internal callbacks (a leftover from the hardware enabling
rework that landed in 6.3)
Generic:
* Drop unnecessary casts from "void *" throughout kvm_main.c
* Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the struct
size by 8 bytes on 64-bit kernels by utilizing a padding hole
Documentation:
* Fix goof introduced by the conversion to rST
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNExkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNyjwf+MkzDael9y9AsOZoqhEZ5OsfQYJ32
Im5ZVYsPRU2K5TuoWql6meIihgclCj1iIU32qYHa2F1WYt2rZ72rJp+HoY8b+TaI
WvF0pvNtqQyg3iEKUBKPA4xQ6mj7RpQBw86qqiCHmlfNt0zxluEGEPxH8xrWcfhC
huDQ+NUOdU7fmJ3rqGitCvkUbCuZNkw3aNPR8dhU8RAWrwRzP2hBOmdxIeo81WWY
XMEpJSijbGpXL9CvM0Jz9nOuMJwZwCCBGxg1vSQq0xTfLySNMxzvWZC2GFaBjucb
j0UOQ7yE0drIZDVhd3sdNslubXXU6FcSEzacGQb9aigMUon3Tem9SHi7Kw==
=S2Hq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
|
||
|
Paul E. McKenney
|
79cf833be6 |
kvm: Remove "select SRCU"
Now that the SRCU Kconfig option is unconditionally selected, there is no longer any point in selecting it. Therefore, remove the "select SRCU" Kconfig statements from the various KVM Kconfig files. Acked-by: Sean Christopherson <seanjc@google.com> (x86) Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Sean Christopherson <seanjc@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <kvm@vger.kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> (arm64) Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Anup Patel <anup@brainfault.org> (riscv) Acked-by: Heiko Carstens <hca@linux.ibm.com> (s390) Reviewed-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> |
||
|
Sean Christopherson
|
7ffc2e8951 |
KVM: MIPS: Make kvm_mips_callbacks const
Make kvm_mips_callbacks fully const as it's now hardcoded to point at kvm_vz_callbacks, the only remaining the set of callbacks. Link: https://lore.kernel.org/all/beb697c2-dfad-780e-4638-76b229f28731@linaro.org Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/20230224192832.1286267-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Thomas Huth
|
d8708b80fa |
KVM: Change return type of kvm_arch_vm_ioctl() to "int"
All kvm_arch_vm_ioctl() implementations now only deal with "int" types as return values, so we can change the return type of these functions to use "int" instead of "long". Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Anup Patel <anup@brainfault.org> Message-Id: <20230208140105.655814-7-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Linus Torvalds
|
498a1cf902 |
Kbuild updates for v6.3
- Change V=1 option to print both short log and full command log.
- Allow V=1 and V=2 to be combined as V=12.
- Make W=1 detect wrong .gitignore files.
- Tree-wide cleanups for unused command line arguments passed to Clang.
- Stop using -Qunused-arguments with Clang.
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag.
- Create Debian and RPM source packages without cleaning the source tree.
- Various cleanups for packaging.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmP7iHoVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGL/cQAK9q5rsNL5a2LgTbm89ORA+UV+ST
hrAoGo5DkJHUbVH53oPzyLynFBZPvUzLK8yjApjXkyAzy2hXYnj+vbTs0s+JVCFL
owS4NB0YP+tpHGuy8bGpWI0GMZSMwmspUteqxk86zuH8uQVAhnCaeV1/Cr6Aqj1h
2jk1FZid3/h7qEkEgu5U8soeyFnV6VhAT6Ie5yfZ2O2RdsSqPUh6vfKrgdyW4RWz
gito0SOUwvjIDfSmTnIIacUibisPRv2OW29OvmDp1aXj5rMhe3UfOznVE3NR86yl
ZbWDAIm6KYT8V1ASOoAUR80qent9IPKytThLK9BVEQCT6bsujCZMvhYhhEvO30TF
Lzsdr+FrES//xag3+hgc63FEied2xxWGQG1cRtzAhfRL9tJ03+mY1omoW6SyKqW/
Gc9PIcTgQbCIrkeL0HuAI1q3I1vkvHXInJKtGkoHh1J9aJ8v5gQpwGA+DDRUnA+A
LQSeEbT2Hf3MoF4CqZRnConvfhlMuLI+j5v54YPrhokxXmv7u807kjfwMFTiZ/+m
CJFlEMf9YRv3pi8g/AYyGAg5ZQigCwzOCRUC5kguFqzZdgnjiI907GEL804lm1Mg
lpx/HtYPyxwWEd2XyU6/C9AEIl3gm7MBd6b1tD54Tb/VmE+AvjS/O9jFYXZqnAnM
Llv4BfK/cQKwHb6o
=HpFZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Change V=1 option to print both short log and full command log
- Allow V=1 and V=2 to be combined as V=12
- Make W=1 detect wrong .gitignore files
- Tree-wide cleanups for unused command line arguments passed to Clang
- Stop using -Qunused-arguments with Clang
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag
- Create Debian and RPM source packages without cleaning the source
tree
- Various cleanups for packaging
* tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits)
kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
docs: kbuild: remove description of KBUILD_LDS_MODULE
.gitattributes: use 'dts' diff driver for *.dtso files
kbuild: deb-pkg: improve the usability of source package
kbuild: deb-pkg: fix binary-arch and clean in debian/rules
kbuild: tar-pkg: use tar rules in scripts/Makefile.package
kbuild: make perf-tar*-src-pkg work without relying on git
kbuild: deb-pkg: switch over to source format 3.0 (quilt)
kbuild: deb-pkg: make .orig tarball a hard link if possible
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
kbuild: srcrpm-pkg: create source package without cleaning
kbuild: rpm-pkg: build binary packages from source rpm
kbuild: deb-pkg: create source package without cleaning
kbuild: add a tool to list files ignored by git
Documentation/llvm: add Chimera Linux, Google and Meta datacenters
setlocalversion: use only the correct release tag for git-describe
setlocalversion: clean up the construction of version output
.gitignore: ignore *.cover and *.mbx
kbuild: remove --include-dir MAKEFLAG from top Makefile
kbuild: fix trivial typo in comment
...
|
||
|
Nathan Chancellor
|
80a20d2f82 |
MIPS: Always use -Wa,-msoft-float and eliminate GAS_HAS_SET_HARDFLOAT
-Wa,-msoft-float is tested with as-option, which will be a problem for clang with an upcoming change to move as-option to use KBUILD_AFLAGS instead of KBUILD_CFLAGS due to a lack of '-mno-abicalls' in KBUILD_AFLAGS at the point that this check occurs; $(cflags-y) is added to KBUILD_AFLAGS towards the end of this file. clang: error: ignoring '-fno-PIE' option as it cannot be used with implicit usage of -mabicalls and the N64 ABI [-Werror,-Woption-ignored] This could be resolved by switching to a cc-option check but '$(cflags-y)' would need to be added so that '-mno-abicalls' is present for the test. However, this check is no longer necessary, as -msoft-float is supported by all supported assembler versions (GNU as 2.25+ and LLVM 11+). Eliminate GAS_HAS_SET_HARDFLOAT and all of its uses, inlining SET_HARDFLOAT where necessary. Link: https://lore.kernel.org/202209101939.bvk64Fok-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Sean Christopherson
|
441f7bfa99 |
KVM: Opt out of generic hardware enabling on s390 and PPC
Allow architectures to opt out of the generic hardware enabling logic, and opt out on both s390 and PPC, which don't need to manually enable virtualization as it's always on (when available). In addition to letting s390 and PPC drop a bit of dead code, this will hopefully also allow ARM to clean up its related code, e.g. ARM has its own per-CPU flag to track which CPUs have enable hardware due to the need to keep hardware enabled indefinitely when pKVM is enabled. Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Anup Patel <anup@brainfault.org> Message-Id: <20221130230934.1014142-50-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
81a1cf9f89 |
KVM: Drop kvm_arch_check_processor_compat() hook
Drop kvm_arch_check_processor_compat() and its support code now that all architecture implementations are nops. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390 Acked-by: Anup Patel <anup@brainfault.org> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-Id: <20221130230934.1014142-33-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
a578a0a9e3 |
KVM: Drop kvm_arch_{init,exit}() hooks
Drop kvm_arch_init() and kvm_arch_exit() now that all implementations are nops. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390 Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Anup Patel <anup@brainfault.org> Message-Id: <20221130230934.1014142-30-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
eed9fcdf57 |
KVM: MIPS: Register die notifier prior to kvm_init()
Call kvm_init() only after _all_ setup is complete, as kvm_init() exposes /dev/kvm to userspace and thus allows userspace to create VMs (and call other ioctls). Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221130230934.1014142-24-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
3fb8e89aa2 |
KVM: MIPS: Setup VZ emulation? directly from kvm_mips_init()
Invoke kvm_mips_emulation_init() directly from kvm_mips_init() instead of bouncing through kvm_init()=>kvm_arch_init(). Functionally, this is a glorified nop as invoking kvm_arch_init() is the very first action performed by kvm_init(). Emptying kvm_arch_init() will allow dropping the hook entirely once all architecture implementations are nops. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221130230934.1014142-23-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
1cfc1c7bf5 |
KVM: MIPS: Hardcode callbacks to hardware virtualization extensions
Now that KVM no longer supports trap-and-emulate (see commit 45c7e8af4a5e "MIPS: Remove KVM_TE support"), hardcode the MIPS callbacks to the virtualization callbacks. Harcoding the callbacks eliminates the technically-unnecessary check on non-NULL kvm_mips_callbacks in kvm_arch_init(). MIPS has never supported multiple in-tree modules, i.e. barring an out-of-tree module, where copying and renaming kvm.ko counts as "out-of-tree", KVM could never encounter a non-NULL set of callbacks during module init. The callback check is also subtly broken, as it is not thread safe, i.e. if there were multiple modules, loading both concurrently would create a race between checking and setting kvm_mips_callbacks. Given that out-of-tree shenanigans are not the kernel's responsibility, hardcode the callbacks to simplify the code. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221130230934.1014142-22-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sean Christopherson
|
63a1bd8ad1 |
KVM: Drop arch hardware (un)setup hooks
Drop kvm_arch_hardware_setup() and kvm_arch_hardware_unsetup() now that all implementations are nops. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390 Acked-by: Anup Patel <anup@brainfault.org> Message-Id: <20221130230934.1014142-10-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Feiyang Chen
|
22c4e80466 |
MIPS&LoongArch&NIOS2: adjust prototypes of p?d_init()
Patch series "mm/sparse-vmemmap: Generalise helpers and enable for LoongArch", v14. This series is in order to enable sparse-vmemmap for LoongArch. But LoongArch cannot use generic helpers directly because MIPS&LoongArch need to call pgd_init()/pud_init()/pmd_init() when populating page tables. So we adjust the prototypes of p?d_init() to make generic helpers can call them, then enable sparse-vmemmap with generic helpers, and to be further, generalise vmemmap_populate_hugepages() for ARM64, X86 and LoongArch. This patch (of 4): We are preparing to add sparse vmemmap support to LoongArch. MIPS and LoongArch need to call pgd_init()/pud_init()/pmd_init() when populating page tables, so adjust their prototypes to make generic helpers can call them. NIOS2 declares pmd_init() but doesn't use, just remove it to avoid build errors. Link: https://lkml.kernel.org/r/20221027125253.3458989-1-chenhuacai@loongson.cn Link: https://lkml.kernel.org/r/20221027125253.3458989-2-chenhuacai@loongson.cn Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Will Deacon <will@kernel.org> Cc: Xuefeng Li <lixuefeng@loongson.cn> Cc: Xuerui Wang <kernel@xen0n.name> Cc: Min Zhou <zhoumin@loongson.cn> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Paolo Bonzini
|
c59fb12758 |
KVM: remove KVM_REQ_UNHALT
KVM_REQ_UNHALT is now unnecessary because it is replaced by the return value of kvm_vcpu_block/kvm_vcpu_halt. Remove it. No functional change intended. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Message-Id: <20220921003201.1441511-13-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
599275c060 |
KVM: mips, x86: do not rely on KVM_REQ_UNHALT
KVM_REQ_UNHALT is a weird request that simply reports the value of kvm_arch_vcpu_runnable() on exit from kvm_vcpu_halt(). Only MIPS and x86 are looking at it, the others just clear it. Check the state of the vCPU directly so that the request is handled as a nop on all architectures. No functional change intended, except for corner cases where an event arrive immediately after a signal become pending or after another similar host-side event. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220921003201.1441511-12-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Chao Peng
|
20ec3ebd70 |
KVM: Rename mmu_notifier_* to mmu_invalidate_*
The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.
- mmu_notifier_seq/range_start/range_end are renamed to
mmu_invalidate_seq/range_start/range_end.
- mmu_notifier_retry{_hva} helper functions are renamed to
mmu_invalidate_retry{_hva}.
- mmu_notifier_count is renamed to mmu_invalidate_in_progress to
avoid confusion with mn_active_invalidate_count.
- While here, also update kvm_inc/dec_notifier_count() to
kvm_mmu_invalidate_begin/end() to match the change for
mmu_notifier_count.
No functional change intended.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
||
|
Mike Rapoport
|
bb5af4f67a |
mips: rename PGD_ORDER to PGD_TABLE_ORDER
This is the order of the page table allocation, not the order of a PGD. While at it remove unused defintion of _PGD_ORDER in asm-offsets. Link: https://lkml.kernel.org/r/20220703141203.147893-7-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Xuerui Wang <kernel@xen0n.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Julia Lawall
|
94bd83e45a |
MIPS: fix typos in comments
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Linus Torvalds
|
5fdb26213f |
ARM:
* A couple of fixes when handling an exception while a SError has been delivered
* Workaround for Cortex-A510's single-step erratum
RISCV:
* Make CY, TM, and IR counters accessible in VU mode
* Fix SBI implementation version
x86:
* Report deprecation of x87 features in supported CPUID
* Preparation for fixing an interrupt delivery race on AMD hardware
* Sparse fix
All except POWER and s390:
* Rework guest entry code to correctly mark noinstr areas and fix vtime'
accounting (for x86, this was already mostly correct but not entirely;
for ARM, MIPS and RISC-V it wasn't)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmH+E4AUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNujwf+ON/8pBWyMPdjiY5l5SyNLpRup8Su
zkQoMEDICI7khYUz2bEAjOazFWHmHPsdogAlG82QeJCbFmCqyMb6iX0uWj53BdGP
P2bOM/tXbulvKBBeiTritkUUNO+hBmmSF+57AOJSW+Enhc7HFwk54cuft6f30r+d
JRaEOhPOP34hQ+wFQQhZZh72BaZBqgnrYwZDp1TiC0Wh8v7P4Nf+NFtEgba2nsxC
xfz5PrEhvegtU8Ee9JAF2bAl7851WJq557P2cOpghtUMgh4t6GzCcUOCKIie67oQ
0Vaf+OieAopdT+QNazSEWO9zxl7eTpWjk2hrwsDrgKHAL/YmuWJuSyEYIA==
=C0LZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- A couple of fixes when handling an exception while a SError has
been delivered
- Workaround for Cortex-A510's single-step erratum
RISC-V:
- Make CY, TM, and IR counters accessible in VU mode
- Fix SBI implementation version
x86:
- Report deprecation of x87 features in supported CPUID
- Preparation for fixing an interrupt delivery race on AMD hardware
- Sparse fix
All except POWER and s390:
- Rework guest entry code to correctly mark noinstr areas and fix
vtime' accounting (for x86, this was already mostly correct but not
entirely; for ARM, MIPS and RISC-V it wasn't)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Use ERR_PTR_USR() to return -EFAULT as a __user pointer
KVM: x86: Report deprecated x87 features in supported CPUID
KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata
KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs
KVM: arm64: Avoid consuming a stale esr value when SError occur
RISC-V: KVM: Fix SBI implementation version
RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode
kvm/riscv: rework guest entry logic
kvm/arm64: rework guest entry logic
kvm/x86: rework guest entry logic
kvm/mips: rework guest entry logic
kvm: add guest_state_{enter,exit}_irqoff()
KVM: x86: Move delivery of non-APICv interrupt into vendor code
kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h
|
||
|
Mark Rutland
|
72e3244512 |
kvm/mips: rework guest entry logic
In kvm_arch_vcpu_ioctl_run() we use guest_enter_irqoff() and guest_exit_irqoff() directly, with interrupts masked between these. As we don't handle any timer ticks during this window, we will not account time spent within the guest as guest time, which is unfortunate. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); In addition, as guest exits during the "run the vcpu" step are handled by kvm_mips_handle_exit(), a wrapper function is added which ensures that such exists are handled with a sequence: guest_state_exit_irqoff(); < handle the exit > guest_state_enter_irqoff(); This means that exits which stop the vCPU running will have a redundant guest_state_enter_irqoff() .. guest_state_exit_irqoff() sequence, which can be addressed with future rework. Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_mips_enter_exit_vcpu() helper which is marked noinstr. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Message-Id: <20220201132926.3301912-6-mark.rutland@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |