- Simplify ARM_MMU_KEEP usage
- Add Rust support for ARM architecture version 7
- Align IPIs reported in /proc/interrupts
- require linker to support KEEP within OVERLAY
- add KEEP() for ARM vectors
- add __printf() attribute for clkdev functions
-----BEGIN PGP SIGNATURE-----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=XL1+
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM and clkdev updates from Russell King:
- Simplify ARM_MMU_KEEP usage
- Add Rust support for ARM architecture version 7
- Align IPIs reported in /proc/interrupts
- require linker to support KEEP within OVERLAY
- add KEEP() for ARM vectors
- add __printf() attribute for clkdev functions
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9445/1: clkdev: Mark some functions with __printf() attribute
ARM: 9444/1: add KEEP() keyword to ARM_VECTORS
ARM: 9443/1: Require linker to support KEEP within OVERLAY for DCE
ARM: 9442/1: smp: Fix IPI alignment in /proc/interrupts
ARM: 9441/1: rust: Enable Rust support for ARMv7
ARM: 9439/1: arm32: simplify ARM_MMU_KEEP usage
vendors are all here, adding new SoC support and fixing existing code.
There are a few patches to the clk framework here as well. They've been
baking in linux-next for weeks so I'm hoping we don't have to revert
them. The disable OF node patch is probably the scariest one although it
seems unlikely that a system would be relying on a driver _not_ probing
because the clk never appeared, but you never know. Nothing looks out of
the ordinary on the driver side but that's because it's mostly a bunch
of data.
Core:
- Use dev_err_probe() in the clk registration path (Peering into the
crystal ball shows many patches that remove printks)
- Check for disabled OF nodes in of_clk_get_hw_from_clkspec()
New Drivers:
- Allwinner A523/T527 clk driver
- Qualcomm IPQ9574 NSS clk driver
- Qualcomm QCS8300 GPU and video clk drivers
- Qualcomm SDM429 RPM clks
- Qualcomm QCM6490 LPASS (low power audio) resets
- Samsung Exynos2200: driver for several clock controllers (Alive,
CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS)
- Samsung Exynos7870: Driver for several clock controllers (Alive, MIF,
DISP AUD, FSYS, G3D, ISP, MFC and PERI)
- Rockchip rk3528 and rk3562 clk driver
Updates:
- Various fixes to SoC clk drivers for incorrect data, avoid touching
protected registers, etc.
- Additions for some missing clks in existing SoC clk drivers
- DT schema conversions from text to YAML
- Kconfig cleanups to allow drivers to be compiled on moar
architectures
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmfm9fYRHHNib3lkQGtl
cm5lbC5vcmcACgkQrQKIl8bklSWl9w/9Ed68QreuOgHOo8tnOeqtGMvYEaJ7fnA4
4P4nsLtSwD1J5ZxOMgE4d2PpyRAFeaRhcbqYhiyk/DJZ0qnkXfQWOwhRS33IS7A/
cf+n0liMMXDDjQ5E0mLqbjzrJVKnb1q9Y0QnKaPJBtl/Ehn8l2bPluJlO5AdmgkE
/wn9uCxY/5qaffaLWjVp/el5QnwixCbYsn5NV/gBwSCj8quTAGu5MNIE547gjhXK
p2zfAcQ66r+Sdd2MT5sXnMpvuzvFxhRl21Nz7Ea9yo8legzdbrVqNuH1WSlvLHUV
w1rshP1IcEBRseiP96eTlz6BJfjGfFClbzP9dv5s+XxinRpxTh+izp8xaEQGcsGP
VrDIAo6vW9TO5U3HQHt7u2LgzGNB+kLKmXzxYvPyCB4lW8dIKfPv4QE+EGGCiMM/
KHGeukREObqW7vOvTMejBGxwer7qUB75DWRDMtTQJYmncvPn9efO0+cl0SbT8M9b
fXJsTI4PuGoFEowwq4VPoELhiafB9hXlzaFF58IHwssLEjM4GgdUePuDizsfNYzr
zD0k+o6zWXXP5jJLvHsdxuiRK99rEHRb03s+v4yAilTK+cRislQIvyUy3mSw6LBF
bZe77U/9aEINMsxTehVXmsG7aaf3B32RHi03YOXWu8JtC36hhRhdJQKXMgl2G0gZ
ND7dptBkM9M=
=RRKz
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Here's the pile of clk driver patches. The usual suspects^Wsilicon
vendors are all here, adding new SoC support and fixing existing code.
There are a few patches to the clk framework here as well. They've
been baking in linux-next for weeks so I'm hoping we don't have to
revert them. The disable OF node patch is probably the scariest one
although it seems unlikely that a system would be relying on a driver
_not_ probing because the clk never appeared, but you never know.
Nothing looks out of the ordinary on the driver side but that's
because it's mostly a bunch of data.
Core:
- Use dev_err_probe() in the clk registration path (Peering into the
crystal ball shows many patches that remove printks)
- Check for disabled OF nodes in of_clk_get_hw_from_clkspec()
New Drivers:
- Allwinner A523/T527 clk driver
- Qualcomm IPQ9574 NSS clk driver
- Qualcomm QCS8300 GPU and video clk drivers
- Qualcomm SDM429 RPM clks
- Qualcomm QCM6490 LPASS (low power audio) resets
- Samsung Exynos2200: driver for several clock controllers (Alive,
CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS)
- Samsung Exynos7870: Driver for several clock controllers (Alive,
MIF, DISP AUD, FSYS, G3D, ISP, MFC and PERI)
- Rockchip rk3528 and rk3562 clk driver
Updates:
- Various fixes to SoC clk drivers for incorrect data, avoid touching
protected registers, etc.
- Additions for some missing clks in existing SoC clk drivers
- DT schema conversions from text to YAML
- Kconfig cleanups to allow drivers to be compiled on moar
architectures"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock
dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles
dt-bindings: reset: fix double id on rk3562-cru reset ids
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: davinci: remove support for da830
...
* clk-allwinner:
clk: sunxi-ng: add support for the A523/T527 PRCM CCU
clk: sunxi-ng: a523: add reset lines
clk: sunxi-ng: a523: add bus clock gates
clk: sunxi-ng: a523: remaining mod clocks
clk: sunxi-ng: a523: add USB mod clocks
clk: sunxi-ng: a523: add interface mod clocks
clk: sunxi-ng: a523: add system mod clocks
clk: sunxi-ng: a523: add video mod clocks
clk: sunxi-ng: a523: Add support for bus clocks
clk: sunxi-ng: Add support for the A523/T527 CCU PLLs
dt-bindings: clk: sunxi-ng: document two Allwinner A523 CCUs
clk: sunxi-ng: Add support for update bit
clk: sunxi-ng: mp: provide wrappers for setting feature flags
clk: sunxi-ng: mp: introduce dual-divider clock
clk: sunxi-ng: h616: Reparent GPU clock during frequency changes
clk: sunxi-ng: h616: Add clock/reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LCD TCON clk and reset
* clk-amlogic:
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock
* clk-qcom: (41 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: qcom: gcc-sm8650: Do not turn off USB GDSCs during gdsc_disable()
clk: qcom: videocc: Constify 'struct qcom_cc_desc'
clk: qcom: gpucc: Constify 'struct qcom_cc_desc'
clk: qcom: dispcc: Constify 'struct qcom_cc_desc'
clk: qcom: camcc: Constify 'struct qcom_cc_desc'
dt-bindings: clock: qcom: sm8450-camcc: Remove qcom,x1e80100-camcc leftover
clk: qcom: Add support for Video Clock Controller on QCS8300
clk: qcom: Add support for GPU Clock Controller on QCS8300
...
Some of the functions are using printf() type of format, and
compiler is not happy about them as is:
clkdev.c:185:17: error: function ‘vclkdev_alloc’ might be a candidate for gnu_printf’ format attribute [-Werror=suggest-attribute=format]
clkdev.c:224:9: error: function ‘vclkdev_create’ might be a candidate for gnu_printf’ format attribute [-Werror=suggest-attribute=format]
clkdev.c:314:9: error: function ‘__clk_register_clkdev’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
Fix the compilation errors by adding __printf() attributes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Add support for gpll0_out_aux clock which acts as the parent for
certain networking subsystem (nss) clocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250313110359.242491-3-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This clock can't be enable with VENUS_CORE0 GDSC turned off. But that
GDSC is under HW control so it can be turned off at any moment.
Instead of checking the dependent clock we can just vote for it to
enable later when GDSC gets turned on.
Fixes: 9bb6cfc3c77e6 ("clk: qcom: Add Global Clock Controller driver for MSM8953")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250315-clock-fix-v1-2-2efdc4920dda@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This clock can't be enable with VENUS_CORE0 GDSC turned off. But that
GDSC is under HW control so it can be turned off at any moment.
Instead of checking the dependent clock we can just vote for it to
enable later when GDSC gets turned on.
Fixes: 5db3ae8b33de6 ("clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver")
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250315-clock-fix-v1-1-2efdc4920dda@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix a typo in MODULE_DESCRIPTION for a1 PLL driver, S4 should be A1.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Reviewed-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241231062552.2982266-1-jian.hu@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The 32k clock reference a parent 'cts_slow_oscin' with a fixme note saying
that this clock should be provided by AO controller.
The HW probably has this clock but it does not exist at the moment in
any controller implementation. Furthermore, referencing clock by the global
name should be avoided whenever possible.
There is no reason to keep this hack around, at least for now.
Fixes: 14c735c8e308 ("clk: meson-gxbb: Add EE 32K Clock for CEC")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241220-amlogic-clk-gxbb-32k-fixes-v1-2-baca56ecf2db@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
gxbb_32k_clk_div sets CLK_DIVIDER_ROUND_CLOSEST in the init_data flag which
is incorrect. This is field is not where the divider flags belong.
Thankfully, CLK_DIVIDER_ROUND_CLOSEST maps to bit 4 which is an unused
clock flag, so there is no unintended consequence to this error.
Effectively, the clock has been used without CLK_DIVIDER_ROUND_CLOSEST
so far, so just drop it.
Fixes: 14c735c8e308 ("clk: meson-gxbb: Add EE 32K Clock for CEC")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241220-amlogic-clk-gxbb-32k-fixes-v1-1-baca56ecf2db@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Several clocks used by both g12a and g12b use the g12a cpu A clock hw
pointer as clock parent. This is incorrect on g12b since the parents of
cluster A cpu clock are different. Also the hw clock provided as parent to
these children is not even registered clock on g12b.
Fix the problem by reverting to the global namespace and let CCF pick
the appropriate, as it is already done for other clocks, such as
cpu_clk_trace_div.
Fixes: 25e682a02d91 ("clk: meson: g12a: migrate to the new parent description method")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-cpua-parent-fix-v1-1-d8c0f41865fe@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The bit index of the peripheral clock for mmc A is wrong
This was probably not a problem for mmc A as the peripheral is likely left
enabled by the bootloader.
No issues has been reported so far but it could be a problem, most likely
some form of conflict between the ethernet and mmc A clock, breaking
ethernet on init.
Use the value provided by the documentation for mmc A before this
becomes an actual problem.
Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-mmca-fix-v1-1-5af421f58b64@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
The divider values in the sdcc1_apps frequency table were incorrectly
updated, assuming the frequency of gpll2_out_main to be 1152MHz.
However, the frequency of the gpll2_out_main clock is actually 576MHz
(gpll2/2).
Due to these incorrect divider values, the sdcc1_apps clock is running
at half of the expected frequency.
Fixing the frequency table of sdcc1_apps allows the sdcc1_apps clock to
run according to the frequency plan.
Fixes: 21b5d5a4a311 ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250306112900.3319330-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the QCM6490 boards, the LPASS firmware controls the complete clock
controller functionalities and associated power domains. However, only
the LPASS resets required to be controlled by the high level OS. Thus,
add support for the resets in the clock driver to enable the Audio SW
driver to assert/deassert the audio resets as needed.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250221-lpass_qcm6490_resets-v5-2-6be0c0949a83@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
During the GDSC FSM state, the GDSC hardware waits for an ACK from the
respective subsystem core. In some scenarios, this ACK can be delayed.
To handle such delays, increase the GDSC status poll timeout from 1500us
to 2000us as per the design recommendation.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Tested-by: Imran Shaik <quic_imrashai@quicinc.com> # on QCS8300
Link: https://lore.kernel.org/r/20250214-gdsc_fixes-v1-2-73e56d68a80f@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the retain_ff_enable bit of GDSCR only if the GDSC is already ON.
Once the GDSCR moves to HW control, SW no longer can determine the state
of the GDSCR and setting the retain_ff bit could destroy all the register
contents we intended to save.
Therefore, move the retain_ff configuration before switching the GDSC to
HW trigger mode.
Cc: stable@vger.kernel.org
Fixes: 173722995cdb ("clk: qcom: gdsc: Add support to enable retention of GSDCR")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Tested-by: Imran Shaik <quic_imrashai@quicinc.com> # on QCS8300
Link: https://lore.kernel.org/r/20250214-gdsc_fixes-v1-1-73e56d68a80f@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This SoC has some leftover code all over the kernel but no boards are
supported anymore. Remove support for da830 from the davinci clock
driver. With it: remove the ifdefs around the data structures as the
da850 remains the only davinci SoC supported and the only user of this
driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250304133423.100884-1-brgl@bgdev.pl
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The A523/T527 SoCs have clock/reset controls in the PRCM part, like many
previous SoCs. For a change, the whole PRCM is documented in the A523
manual, including the system bus tree, so we can describe all those
clocks correctly based on that. There layout seems to be derived from
the H6 and H616 PRCM CCUs, though there are more clocks, and many clocks
have subtly changed.
Describe all the mod and gate clocks, including the three bus clocks
(R_AHB, R_APB0, and R_APB1).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-15-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Allwinner SoCs do not contain a separate reset controller, instead the
reset lines for the various devices are integrated into the "BGR" (Bus
Gate / Reset) registers, for each device group: one for all UARTs, one
for all SPI interfaces, and so on.
The Allwinner CCU driver also doubles as a reset provider, and since the
reset lines are indeed just single bits in those BGR register, we can
represent them easily in an array of structs, just containing the
register offset and the bit number.
Add the location of the reset bits for all devices in the A523/T527
SoCs, using the existing sunxi CCU infrastructure.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-14-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the various bus clock gates that control access to the devices'
register interface.
These clocks are each just one bit, typically the lower bits in some "BGR"
(Bus Gate / Reset) registers, for each device group: one for all UARTs,
one for all SPI interfaces, and so on.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-13-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the remaining mod clocks, driving various parts of the SoC: the "LEDC"
LED controller, the "CSI" camera interface, the "ISP" image processor,
the DSP clock, and the "fanout" clocks, which allow to put clock signals
on external pins.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-12-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the clocks driving the USB subsystem: this just covers the two
clocks creating the 12 MHz rate for the OHCI (USB 1.x) device. The rest
of the USB clocks are either gate clocks (added later) or created
internal to the USB IP.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-11-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the clocks driving what the user manual summarises under "interface"
devices: raw NAND flash, MMC, SPI, EMAC, "IR" infrared, and the "GPADC"
general purpose analogue/digital converter.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-10-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the clocks driving some core system related subsystems of the SoC:
the "CE" crypto engine, the high speed timers, the DRAM and the associated
MBUS clock, and the PCIe clock.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-9-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the clocks driving the various video subsystems of the SoC: the "DE"
display engine, the "DI" deinterlacer, the "G2D" 2D graphics system, the
Mali "GPU", the "VE" video engine, its associated IOMMU, as well as the
clocks for the various video output drivers (HDMI, DP, LCDs).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-8-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the basic bus clocks for the Allwinner A523 and T527 SoCs.
This covers the AHB, APB0 and APB1 clocks. Linux is not supposed to
change those clocks, but they are needed as parents for many other mod
clocks.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-7-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the PLL clocks of the main CCU of the Allwinner A523 and T527 SoCs.
The clocks were modelled after the A523 and T527 manual, and double
checked by writing all 1's into the respective register, to spot all
implemented bits.
The PLL and mod clocks for the two CPU clusters and the DSU are part of
a separate CCU, also most audio clocks are collected in a DSP CCU, so
both of these clock groups are missing from this driver.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-6-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Some clocks in the Allwinner A523 SoC contain an "update bit" (bit 27),
which must be set to apply any register changes, namely the mux
selector, the divider and the gate bit.
Add a new CCU feature bit to mark those clocks, and set bit 27 whenever
we are applying any changes.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-4-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
So far our sunxi clock instantiation macros set the required clock
features depending on the clock type, but the new "dual divider MP
clock" requires us to pass that piece of information in by the user.
Add new wrapper macros that allow to specify a "features" field, to
allow marking those dual-divider clocks accordingly. Also add two
convenience macros that deal with the most common cases.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-3-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A523 SoC introduces some new MP-style mod clock, where the
second "P" divider is an actual numerical divider value, and not the
numbers of bits to shift (1..32 instead of 1,2,4,8).
The rest of the clock is the same as the existing MP clock, so enhance the
existing code to accommodate for this.
Introduce the new CCU feature bit CCU_FEATURE_DUAL_DIV to mark an MP
clock as having two dividers, and change the dividing and encoding code
to differentiate the two cases.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20250307002628.10684-2-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
1. Google GS101: Fix synchronous external abort during system suspend.
The driver access registers not available for OS, although issue
would not be visible in earlier kernels due to missing suspend
support.
2. Tesla FSD: Correct PLL142XX lock time.
-----BEGIN PGP SIGNATURE-----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=m4uR
-----END PGP SIGNATURE-----
Merge tag 'samsung-clk-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-fixes
Pull Samsung clk driver fixes from Krzysztof Kozlowski:
- Google GS101: Fix synchronous external abort during system suspend.
The driver access registers not available for OS, although issue
would not be visible in earlier kernels due to missing suspend
support.
- Tesla FSD: Correct PLL142XX lock time
* tag 'samsung-clk-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: update PLL locktime for PLL142XX used on FSD platform
clk: samsung: gs101: fix synchronous external abort in samsung_clk_save()
The devm_kzalloc() function returns NULL on error, not error pointers.
Fix the check.
Fixes: 03437e857b0a ("clk: mmp: Add Marvell PXA1908 APMU driver")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20250307064708.209511-1-hanchunchao@inspur.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
<clk.h> header is for clock consumers, so drop its include from the
Samsung clock controller drivers which do not use the consumer API
(there are few which do, so leave it there).
Drop including of <of.h> and <of_address.h> headers for all drivers
which do not use anything from generic OF API or of_iomap().
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250305-clk-samsung-headers-cleanup-v2-2-ea1ae8e9e2bf@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add an include for <mod_devicetable.h> in the drivers which use
of_device_id table to bring its declaration directly, not through some
other headers.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250305-clk-samsung-headers-cleanup-v2-1-ea1ae8e9e2bf@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add required clocks and resets signals for the TSU IP available on the
Renesas RZ/G3E SoC
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250227122453.30480-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
With PWRSTS_OFF_ON, USB GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of USB controller from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Fixes: c58225b7e3d7 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250305-topic-sm8650-upstream-fix-usb-suspend-v1-1-649036ab0557@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently PLL142XX locktime is 270. As per spec, it should be 150. Hence
update PLL142XX controller locktime to 150.
Cc: stable@vger.kernel.org
Fixes: 4f346005aaed ("clk: samsung: fsd: Add initial clock support")
Signed-off-by: Varada Pavani <v.pavani@samsung.com>
Link: https://lore.kernel.org/r/20250225131918.50925-3-v.pavani@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
EARLY_WAKEUP_SW_TRIG_*_SET and EARLY_WAKEUP_SW_TRIG_*_CLEAR
registers are only writeable. Attempting to read these registers
during samsung_clk_save() causes a synchronous external abort.
Remove these 8 registers from cmu_top_clk_regs[] array so that
system suspend gets further.
Note: the code path can be exercised using the following command:
echo mem > /sys/power/state
Fixes: 2c597bb7d66a ("clk: samsung: clk-gs101: Add cmu_top, cmu_misc and cmu_apm support")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250303-clk-suspend-fix-v1-1-c2edaf66260f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
We have a lot of driver code that prints an error message when
registering a clk fails. Do that in the core function instead to
consolidate code. This also helps drivers avoid the anti-pattern of
accessing the struct clk_hw::init pointer after registration.
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20250226235408.1339266-1-sboyd@kernel.org
In clk_calc_new_rates, the "ret" is only used to store the return value
of clk_core_determine_round_nolock, and the data type of the return
value of clk_core_determine_round_nolock is int.
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250207-correct_data_types-v1-1-f22bc7ea220d@amlogic.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
instead of printing errros as a number(%ld), it's better to print in string
format for better readability of logs.
Signed-off-by: Onkarnath <onkarnath.1@samsung.com>
Link: https://lore.kernel.org/r/20240412090749.15392-1-onkarnath.1@samsung.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The syscon helper device_node_to_regmap() is used to fetch a regmap
registered to a device node. It also currently creates this regmap
if the node did not already have a regmap associated with it. This
should only be used on "syscon" nodes. This driver is not such a
device and instead uses device_node_to_regmap() on its own node as
a hacky way to create a regmap for itself.
This will not work going forward and so we should create our regmap
the normal way by defining our regmap_config, fetching our memory
resource, then using the normal regmap_init_mmio() function.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250123181913.597304-1-afd@ti.com
Tested-by: Nishanth Menon <nm@ti.com>
[sboyd@kernel.org: Drop dev_err_probe() because the mapping function
already does it]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
