mirror of
https://github.com/torvalds/linux.git
synced 2025-04-06 00:16:18 +00:00
2696 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
7d06015d93 |
pci-v6.15-changes
-----BEGIN PGP SIGNATURE-----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=gM1i
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)
- Log debug messages about reset methods being used (Bjorn Helgaas)
- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)
- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)
Resource management:
- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)
- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)
- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)
ASPM:
- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)
Power management:
- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)
Power control:
- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)
- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)
- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)
- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)
Bandwidth control:
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)
Hotplug:
- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)
- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)
- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)
Virtualization:
- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)
DOE:
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
Endpoint framework:
- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)
- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)
- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)
- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)
Altera PCIe controller driver:
- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)
AMD MDB PCIe controller driver:
- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)
Broadcom STB PCIe controller driver:
- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)
- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)
- Add BCM2712 support and DT updates (Stanimir Varbanov)
- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)
- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)
- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)
- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)
- Make const read-only arrays static (Colin Ian King)
Cadence PCIe endpoint driver:
- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)
Freescale Layerscape PCIe controller driver:
- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)
- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)
HiSilicon STB PCIe controller driver:
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
Intel Gateway PCIe controller driver:
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
Intel VMD host bridge driver:
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)
MediaTek PCIe Gen3 controller driver:
- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)
- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)
Qualcomm PCIe controller driver:
- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)
- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)
- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
Synopsys DesignWare PCIe controller driver:
- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)
- Add Rockchip support for DWC debugfs features (Niklas Cassel)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)
- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)
TI J721E PCIe driver:
- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)
Xilinx Versal CPM PCIe controller driver:
- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
Miscellaneous:
- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)
- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"
* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...
|
||
|
Linus Torvalds
|
a9fc230497 |
soc: driver updates for 6.15, part 1
These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware interfaces,
adding support for additional firmware features including SoC
identification and FF-A SRI callbacks as well as various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and Apple chips
There will be a follow up with a few more driver updates that are still
causing build regressions at the moment.
-----BEGIN PGP SIGNATURE-----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=QcjY
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
|
||
|
Linus Torvalds
|
336b4dae6d |
IOMMU Updates for Linux v6.15
Including:
- Core: IOMMUFD dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle in
the domain
- Give iommufd its own SW_MSI implementation along with some IRQ layer
rework
- Improvements to the handle attach API
- Core: Fixes for probe-issues from Robin
- Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
- AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
- ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework of
pm_runtime_put_autosuspend()
- Rockchip driver changes:
- Driver adjustments for recent DT probing changes
- S390 IOMMU changes:
- Support for IOMMU passthrough
- Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1
-----BEGIN PGP SIGNATURE-----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=a8Pd
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core iommufd dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle
in the domain
- Give iommufd its own SW_MSI implementation along with some IRQ
layer rework
- Improvements to the handle attach API
Core fixes for probe-issues from Robin
Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework
of pm_runtime_put_autosuspend()
Rockchip driver changes:
- Driver adjustments for recent DT probing changes
S390 IOMMU changes:
- Support for IOMMU passthrough
Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1"
* tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommu/vt-d: Fix possible circular locking dependency
iommu/vt-d: Don't clobber posted vCPU IRTE when host IRQ affinity changes
iommu/vt-d: Put IRTE back into posted MSI mode if vCPU posting is disabled
iommu: apple-dart: fix potential null pointer deref
iommu/rockchip: Retire global dma_dev workaround
iommu/rockchip: Register in a sensible order
iommu/rockchip: Allocate per-device data sensibly
iommu/mediatek-v1: Support COMPILE_TEST
iommu/amd: Enable support for up to 2K interrupts per function
iommu/amd: Rename DTE_INTTABLEN* and MAX_IRQS_PER_TABLE macro
iommu/amd: Replace slab cache allocator with page allocator
iommu/amd: Introduce generic function to set multibit feature value
iommu: Don't warn prematurely about dodgy probes
iommu/arm-smmu: Set rpm auto_suspend once during probe
dt-bindings: arm-smmu: Document QCS8300 GPU SMMU
iommu: Get DT/ACPI parsing into the proper probe path
iommu: Keep dev->iommu state consistent
iommu: Resolve ops in iommu_init_device()
iommu: Handle race with default domain setup
iommu: Unexport iommu_fwspec_free()
...
|
||
|
Linus Torvalds
|
edb0e8f6e2 |
ARM:
* Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
* Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
* Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
* Paravirtual interface for discovering the set of CPU implementations
where a VM may run, addressing a longstanding issue of guest CPU
errata awareness in big-little systems and cross-implementation VM
migration
* Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
* pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
* Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
* Remove unnecessary header include path
* Assume constant PGD during VM context switch
* Add perf events support for guest VM
RISC-V:
* Disable the kernel perf counter during configure
* KVM selftests improvements for PMU
* Fix warning at the time of KVM module removal
x86:
* Add support for aging of SPTEs without holding mmu_lock. Not taking mmu_lock
allows multiple aging actions to run in parallel, and more importantly avoids
stalling vCPUs. This includes an implementation of per-rmap-entry locking;
aging the gfn is done with only a per-rmap single-bin spinlock taken, whereas
locking an rmap for write requires taking both the per-rmap spinlock and
the mmu_lock.
Note that this decreases slightly the accuracy of accessed-page information,
because changes to the SPTE outside aging might not use atomic operations
even if they could race against a clear of the Accessed bit. This is
deliberate because KVM and mm/ tolerate false positives/negatives for
accessed information, and testing has shown that reducing the latency of
aging is far more beneficial to overall system performance than providing
"perfect" young/old information.
* Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
* Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
* Drop "support" for async page faults for protected guests that do not set
SEND_ALWAYS (i.e. that only want async page faults at CPL3)
* Bring a bit of sanity to x86's VM teardown code, which has accumulated
a lot of cruft over the years. Particularly, destroy vCPUs before
the MMU, despite the latter being a VM-wide operation.
* Add common secure TSC infrastructure for use within SNP and in the
future TDX
* Block KVM_CAP_SYNC_REGS if guest state is protected. It does not make
sense to use the capability if the relevant registers are not
available for reading or writing.
* Don't take kvm->lock when iterating over vCPUs in the suspend notifier to
fix a largely theoretical deadlock.
* Use the vCPU's actual Xen PV clock information when starting the Xen timer,
as the cached state in arch.hv_clock can be stale/bogus.
* Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across different
PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as KVM's suspend
notifier only accounts for kvmclock, and there's no evidence that the
flag is actually supported by Xen guests.
* Clean up the per-vCPU "cache" of its reference pvclock, and instead only
track the vCPU's TSC scaling (multipler+shift) metadata (which is moderately
expensive to compute, and rarely changes for modern setups).
* Don't write to the Xen hypercall page on MSR writes that are initiated by
the host (userspace or KVM) to fix a class of bugs where KVM can write to
guest memory at unexpected times, e.g. during vCPU creation if userspace has
set the Xen hypercall MSR index to collide with an MSR that KVM emulates.
* Restrict the Xen hypercall MSR index to the unofficial synthetic range to
reduce the set of possible collisions with MSRs that are emulated by KVM
(collisions can still happen as KVM emulates Hyper-V MSRs, which also reside
in the synthetic range).
* Clean up and optimize KVM's handling of Xen MSR writes and xen_hvm_config.
* Update Xen TSC leaves during CPUID emulation instead of modifying the CPUID
entries when updating PV clocks; there is no guarantee PV clocks will be
updated between TSC frequency changes and CPUID emulation, and guest reads
of the TSC leaves should be rare, i.e. are not a hot path.
x86 (Intel):
* Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and thus
modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1.
* Pass XFD_ERR as the payload when injecting #NM, as a preparatory step
for upcoming FRED virtualization support.
* Decouple the EPT entry RWX protection bit macros from the EPT Violation
bits, both as a general cleanup and in anticipation of adding support for
emulating Mode-Based Execution Control (MBEC).
* Reject KVM_RUN if userspace manages to gain control and stuff invalid guest
state while KVM is in the middle of emulating nested VM-Enter.
* Add a macro to handle KVM's sanity checks on entry/exit VMCS control pairs
in anticipation of adding sanity checks for secondary exit controls (the
primary field is out of bits).
x86 (AMD):
* Ensure the PSP driver is initialized when both the PSP and KVM modules are
built-in (the initcall framework doesn't handle dependencies).
* Use long-term pins when registering encrypted memory regions, so that the
pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and don't lead to
excessive fragmentation.
* Add macros and helpers for setting GHCB return/error codes.
* Add support for Idle HLT interception, which elides interception if the vCPU
has a pending, unmasked virtual IRQ when HLT is executed.
* Fix a bug in INVPCID emulation where KVM fails to check for a non-canonical
address.
* Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is invalid, e.g.
because the vCPU was "destroyed" via SNP's AP Creation hypercall.
* Reject SNP AP Creation if the requested SEV features for the vCPU don't
match the VM's configured set of features.
Selftests:
* Fix again the Intel PMU counters test; add a data load and do CLFLUSH{OPT} on the data
instead of executing code. The theory is that modern Intel CPUs have
learned new code prefetching tricks that bypass the PMU counters.
* Fix a flaw in the Intel PMU counters test where it asserts that an event is
counting correctly without actually knowing what the event counts on the
underlying hardware.
* Fix a variety of flaws, bugs, and false failures/passes dirty_log_test, and
improve its coverage by collecting all dirty entries on each iteration.
* Fix a few minor bugs related to handling of stats FDs.
* Add infrastructure to make vCPU and VM stats FDs available to tests by
default (open the FDs during VM/vCPU creation).
* Relax an assertion on the number of HLT exits in the xAPIC IPI test when
running on a CPU that supports AMD's Idle HLT (which elides interception of
HLT if a virtual IRQ is pending and unmasked).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfcTkEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMnQAf/cPx72hJOdNy4Qrm8M33YLXVRVV00
yEZ8eN8TWdOclr0ltE/w/ELGh/qS4CU8pjURAk0A6lPioU+mdcTn3dPEqMDMVYom
uOQ2lusEHw0UuSnGZSEjvZJsE/Ro2NSAsHIB6PWRqig1ZBPJzyu0frce34pMpeQH
diwriJL9lKPAhBWXnUQ9BKoi1R0P5OLW9ahX4SOWk7cAFg4DLlDE66Nqf6nKqViw
DwEucTiUEg5+a3d93gihdD4JNl+fb3vI2erxrMxjFjkacl0qgqRu3ei3DG0MfdHU
wNcFSG5B1n0OECKxr80lr1Ip1KTVNNij0Ks+w6Gc6lSg9c4PptnNkfLK3A==
=nnCN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
||
|
Linus Torvalds
|
0f40464674 |
Updates for interrupt chip drivers:
- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.
- Rework of the RISC-V MSI driver.
This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable PCI/MSI
controllers are prone to lose interrupts when the MSI message is
updated to change the affinity because the message write consists of
three 32-bit subsequent writes, which update address and data. As these
writes are non-atomic versus the device raising an interrupt, the
device can observe a half written update and issue an interrupt on the
wrong vector. This is mitiated by a carefully orchestrated step by step
update and the observation of an eventually pending interrupt on the
CPU which issues the update. The algorithm follows the well established
method of the X86 MSI driver.
- A new driver for the RISC-V Sophgo SG2042 MSI controller
- Overhaul of the Renesas RZQ2L driver.
Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure paths.
- Expand the Renesas RZV2H driver to support RZ/G3E SoCs
- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.
- Add support for the Allwinner AS23 NMI controller
- Expand the IMX irqsteer driver to handle up to 960 input interrupts
- The usual small updates, cleanups and device tree changes.
-----BEGIN PGP SIGNATURE-----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=jPHa
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.
- Rework of the RISC-V MSI driver
This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable
PCI/MSI controllers are prone to lose interrupts when the MSI message
is updated to change the affinity because the message write consists
of three 32-bit subsequent writes, which update address and data. As
these writes are non-atomic versus the device raising an interrupt,
the device can observe a half written update and issue an interrupt
on the wrong vector. This is mitiated by a carefully orchestrated
step by step update and the observation of an eventually pending
interrupt on the CPU which issues the update. The algorithm follows
the well established method of the X86 MSI driver.
- A new driver for the RISC-V Sophgo SG2042 MSI controller
- Overhaul of the Renesas RZQ2L driver
Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure
paths.
- Expand the Renesas RZV2H driver to support RZ/G3E SoCs
- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.
- Add support for the Allwinner AS23 NMI controller
- Expand the IMX irqsteer driver to handle up to 960 input interrupts
- The usual small updates, cleanups and device tree changes
* tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
irqchip/imx-irqsteer: Support up to 960 input interrupts
irqchip/sunxi-nmi: Support Allwinner A523 NMI controller
dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller
irqchip/davinci-cp-intc: Remove public header
irqchip/renesas-rzv2h: Add RZ/G3E support
irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP}
irqchip/renesas-rzv2h: Update TSSR_TIEN macro
irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted()
irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type()
dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC
riscv: sophgo: dts: Add msi controller for SG2042
irqchip: Add the Sophgo SG2042 MSI interrupt controller
dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI
arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI
...
|
||
|
Joerg Roedel
|
22df63a23a | Merge branches 'apple/dart', 'arm/smmu/updates', 'arm/smmu/bindings', 'rockchip', 's390', 'core', 'intel/vt-d' and 'amd/amd-vi' into next | ||
|
Arnd Bergmann
|
c6325a2e26 |
Amlogic drivers changes for v6.15:
- GPIO interrupt controller support for Amlogic A4 and A5 SoCs -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmfX/FAACgkQd9zb2sjI SdFTDw/+Ldaw2C5sMAkij6b/O/XC0L8Az32kySHfJgUlN/CtsST2V6bU660IzQOo 9BhnZW59WZb4cakoVGtYgTjXWv1jyUxp6NvH2dc6TtdJ/TRV12mw4unOoVc2NVHX so4QbguTXyfJr1Yt2aiySzeivfuWALY4+wOhDLTOovPJJ2CiCR4a3hJywFfy9/2D VuVFHlX8UjGZEQvsr9OD39lnN4wTYddTKgvf9iu/I5ZrlGEsZuOrl5K8vvxZxtTm zLyJYj+cAhhbiPL0or1KKcqC6J+2hP39HpT7eYDXNHfyCBsDqmZp0HGPbhrMGPY7 fofgbKDGsP8sMz8aNrS8lym7gyFSCVm+FUYYi/YeIykUXll//b+of38ITwUvxWyn J7Ipvt5U5GKhjDZ1uQ+S3Q5x+JlWVm/gflJs4V5Ycrw1UxTtCLPdu07G2cyk4AqD Yyn7td7l+ta00x+itD0yMQkn8Sq6ucqi4CqwW2D6xZS6olK32oyAbSCE6iT0Papu AJoSXLtogPTLdQvDzBk2kIdwulu5/VDNcuIBsLPmhx1mp88JxLeeQxNxWS9O3z3C 3BCAh93CT0WwzXgAQY8zHuEVrvgJSynlHXm+RDbzezFEsPA7ucNdRovPsbQ7xIVh AmcDxZsMKepIlPB7Ldei7vA6NKXJlYbJxLLLFbmatjMFxqgSa4k= =wTrP -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfbPO4ACgkQYKtH/8kJ UicNYxAAvVW+/PLWjT2xp/WPclXpQxmf1xIfbx1LPG9ilY0aso1tMiseQsgF+eCo I11mhrHLljM6y56DGL/OmeWFGh8XoB9y61PLIaE0L4AyTNsaW5mvlsgK068RixMt 3+RZg+rQglFqcXGRRUV6JTqFFIvYNh3msIEAmv+v7mRsNiVNfvsLfo5vCb1uRs6Y H0hKspeMxa862FrPEDacUuHEbYT38my6hGrSiUQdoaV2A5qLt7VQ76mYIFPt3FSr M7alenuHrr37I4kZ+BAcz/Yd26PTUX9Xm5RqOfPxrh42hePZhw6I/HM1shqxcjAv FSfNcYKAKl43dNHuDKktPNpZDt/tLCSTCkDqD3nKyhoO62CPnQ8z/Q5cyQY3+v2J zROD2E20ValyFvoX3rod2Fp4lUGYXVwUy+Nun7MUZ1FxGliGuTHOlQBSKvgHWJD/ fYDID3L5LBLVLiA/Q4fAehjo4UPmGZIuDrYOqoXL9OMDNykBrKcRksE/PJHAhh38 fBJZZmjCF77Vi7YaiLgTeqOn88d5PhrMtW9uCluLZY3u/iV913xjLsn4ixAW1TSs yCqfI0HQp2grlHPY9PBPArAfhn8Dt01OqyuWbRfE5PToDtdrBpTiSU8xCPCwnMai Na0zsYs4I8E/Jrr9YPmKLgs4IxHp0J0WxkK/JRnlbBfApdXN0ro= =RshC -----END PGP SIGNATURE----- Merge tag 'amlogic-drivers-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers Amlogic drivers changes for v6.15: - GPIO interrupt controller support for Amlogic A4 and A5 SoCs * tag 'amlogic-drivers-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: irqchip: Add support for Amlogic A4 and A5 SoCs dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs Link: https://lore.kernel.org/r/eeaa8d3b-4fc3-4dae-92b8-0fc590e1a070@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Oliver Upton
|
56e3e5c8f7 |
Merge branch 'kvm-arm64/nv-vgic' into kvmarm/next
* kvm-arm64/nv-vgic: : NV VGICv3 support, courtesy of Marc Zyngier : : Support for emulating the GIC hypervisor controls and managing shadow : VGICv3 state for the L1 hypervisor. As part of it, bring in support for : taking IRQs to the L1 and UAPI to manage the VGIC maintenance interrupt. KVM: arm64: nv: Fail KVM init if asking for NV without GICv3 KVM: arm64: nv: Allow userland to set VGIC maintenance IRQ KVM: arm64: nv: Fold GICv3 host trapping requirements into guest setup KVM: arm64: nv: Propagate used_lrs between L1 and L0 contexts KVM: arm64: nv: Request vPE doorbell upon nested ERET to L2 KVM: arm64: nv: Respect virtual HCR_EL2.TWx setting KVM: arm64: nv: Add Maintenance Interrupt emulation KVM: arm64: nv: Handle L2->L1 transition on interrupt injection KVM: arm64: nv: Nested GICv3 emulation KVM: arm64: nv: Sanitise ICH_HCR_EL2 accesses KVM: arm64: nv: Plumb handling of GICv3 EL2 accesses KVM: arm64: nv: Add ICH_*_EL2 registers to vpcu_sysreg KVM: arm64: nv: Load timer before the GIC arm64: sysreg: Add layout for ICH_MISR_EL2 arm64: sysreg: Add layout for ICH_VTR_EL2 arm64: sysreg: Add layout for ICH_HCR_EL2 Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Xianwei Zhao
|
bbd6fcc76b |
irqchip: Add support for Amlogic A4 and A5 SoCs
The Amlogic A4 SoCs support 12 GPIO IRQ lines and 2 AO GPIO IRQ lines, A5 SoCs support 12 GPIO IRQ lines, details are as below. A4 IRQ Number: - 72:55 18 pins on bank T - 54:32 23 pins on bank X - 31:16 16 pins on bank D - 15:14 2 pins on bank E - 13:0 14 pins on bank B A4 AO IRQ Number: - 7 1 pin on bank TESTN - 6:0 7 pins on bank AO A5 IRQ Number: - 98 1 pin on bank TESTN - 97:82 16 pins on bank Z - 81:62 20 pins on bank X - 61:48 14 pins on bank T - 47:32 16 pins on bank D - 31:27 5 pins on bank H - 26:25 2 pins on bank E - 24:14 11 pins on bank C - 13:0 14 pins on bank B Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Link: https://lore.kernel.org/r/20250311-irqchip-gpio-a4-a5-v5-2-ca4cc276c18c@amlogic.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> |
||
|
Shengjiu Wang
|
7db5fd6b75 |
irqchip/imx-irqsteer: Support up to 960 input interrupts
The irqsteer IP routes groups of input interrupts to a dedicated system interrupt per group. Each group handles 64 input interrupts. The current driver is limited to 8 groups, i.e. 512 input interrupts, which is sufficient for the existing i.MX SoCs. The upcoming i.MX94 family extends the irqsteer IP to 15 groups, i.e. 960 interrupts. Extending the group limit to 15 enables this, but the new SoCs are not guaranteed to utilize all 15 groups. Unused groups have no mapping for the underlying output interrupt, which makes the probe function fail as it expects a valid mapping for each group output. Remove this limitation and stop the mapping loop, when no valid mapping is detected. [ tglx: Massage change log ] Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/all/20250305095522.2177843-1-ping.bai@nxp.com |
||
|
Andre Przywara
|
922ac17c7b |
irqchip/sunxi-nmi: Support Allwinner A523 NMI controller
The NMI controller in the Allwinner A523 is almost compatible to the previous versions of this IP, but requires the extra bit 31 to be set in the enable register to actually report the NMI. Add a mask to allow such an enable bit to be specified, and add this to the per-SoC data structure. As this struct was just for different register offsets so far, it was consequently named "reg_offs", which is now no longer applicable, so rename this to the more generic "data" on the way, and move the existing offsets into a struct of its own. Also add the respective Allwinner A523 compatible string, and set bit 31 in its enable mask, to add support for this SoC. [ tglx: Mop up some coding style along with it ] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250307005712.16828-7-andre.przywara@arm.com |
||
|
Bartosz Golaszewski
|
71cbbb7149 |
irqchip/davinci-cp-intc: Remove public header
There are no more users of irq-davinci-cp-intc.h (da830.c doesn't use any of its symbols). Remove the header and make the driver stop using the config structure. [ tglx: Mop up coding style ] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250304131815.86549-1-brgl@bgdev.pl |
||
|
Marc Zyngier
|
22513c0d2a |
arm64: sysreg: Add layout for ICH_HCR_EL2
The ICH_HCR_EL2-related macros are missing a number of control bits that we are about to handle. Take this opportunity to fully describe the layout of that register as part of the automatic generation infrastructure. This results in a bit of churn, unfortunately. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20250225172930.1850838-2-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Biju Das
|
399b279998 |
irqchip/renesas-rzv2h: Add RZ/G3E support
The ICU block on the RZ/G3E SoC is almost identical to the one found on the RZ/V2H SoC, with the following differences: - The TINT register base offset is 0x800 instead of zero. - The number of GPIO interrupts for TINT selection is 141 instead of 86. - The pin index and TINT selection index are not in the 1:1 map. - The number of TSSR registers is 16 instead of 8. - Each TSSR register can program 2 TINTs instead of 4 TINTs. Add support for the RZ/G3E driver by filling the rzv2h_hw_info table and adding LUT for mapping between pin index and TINT selection index. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/20250224131253.134199-13-biju.das.jz@bp.renesas.com |
||
|
Biju Das
|
e3a16c33db |
irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP}
On RZ/G3E, TSSEL register field is 8 bits wide compared to 7 on RZ/V2H. Also bits 8..14 is reserved on RZ/G3E and any writes on these reserved bits is ignored. Use bitmask GENMASK(field_width - 2, 0) on both SoCs for extracting TSSEL and then update the macros ICU_TSSR_TSSEL_PREP and ICU_TSSR_TSSEL_MASK for supporting both SoCs. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/20250224131253.134199-12-biju.das.jz@bp.renesas.com |
||
|
Biju Das
|
76c3b77473 |
irqchip/renesas-rzv2h: Update TSSR_TIEN macro
On RZ/G3E, TIEN bit position is at 15 compared to 7 on RZ/V2H. Replace the macro ICU_TSSR_TIEN(n)->ICU_TSSR_TIEN(n, _field_width) for supporting both these SoCs. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/20250224131253.134199-11-biju.das.jz@bp.renesas.com |
||
|
Biju Das
|
1a6ebcc10b |
irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info
On RZ/G3E the field width for TSSR register for a TINT is 16 compared to 8
on the RZ/V2H.
Add field_width to struct rzv2h_hw_info and replace the macros ICU_TSSR_K
and ICU_TSSR_TSSEL_N by a runtime evaluation:
(32 / field_width) provides the number of tints in the TSSR register.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250224131253.134199-10-biju.das.jz@bp.renesas.com
|
||
|
Biju Das
|
eb23d23d08 |
irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info
The number of GPIO interrupts on RZ/G3E for TINT selection is 141 compared to 86 on RZ/V2H. Rename the macro ICU_PB5_TINT->ICU_RZV2H_TSSEL_MAX_VAL to hold this difference for RZ/V2H. Add max_tssel to struct rzv2h_hw_info and replace the hardcoded constants in the code. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/20250224131253.134199-9-biju.das.jz@bp.renesas.com |
||
|
Biju Das
|
0a9d6ef64e |
irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
The ICU block on the RZ/G3E SoC is almost identical to the one found on the RZ/V2H SoC, with the following differences: - The TINT register base offset is 0x800 instead of zero. - The number of GPIO interrupts for TINT selection is 141 instead of 86. - The pin index and TINT selection index are not in the 1:1 map - The number of TSSR registers is 16 instead of 8 - Each TSSR register can program 2 TINTs instead of 4 TINTs Introduce struct rzv2h_hw_info to describe the SoC properties and refactor the code by moving rzv2h_icu_init() into rzv2h_icu_init_common() and pass the variable containing hw difference to support both these SoCs. As a first step add t_offs to the new struct and replace the hardcoded constants in the code. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/20250224131253.134199-8-biju.das.jz@bp.renesas.com |
||
|
Biju Das
|
5ec8cabc3b |
irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
Simplify rzv2h_icu_init() by using devm_pm_runtime_enable(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/20250224131253.134199-7-biju.das.jz@bp.renesas.com |
||
|
Biju Das
|
ad773ebc6e |
irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted()
Use devm_reset_control_get_exclusive_deasserted() to simplify rzv2h_icu_init(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/all/20250224131253.134199-6-biju.das.jz@bp.renesas.com |
||
|
Biju Das
|
f5de954388 |
irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
Use devm_add_action_or_reset() for calling put_device in error path of rzv2h_icu_init() to simplify the code by using the recently added devm_* helpers. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/all/20250224131253.134199-5-biju.das.jz@bp.renesas.com |
||
|
Biju Das
|
c56cab0c3e |
irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
Use rzv2h_icu_chip directly on irq_domain_set_hwirq_and_chip() and drop the global variable irqchip from struct rzv2h_icu_priv. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/20250224131253.134199-4-biju.das.jz@bp.renesas.com |
||
|
Biju Das
|
7231065078 |
irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type()
The variable tssel_n is used for selecting TINT source and titsel_n for
setting the interrupt type. The variable titsel_n is wrongly used for
enabling the TINT interrupt in rzv2h_tint_set_type(). Fix this issue by
using the correct variable tssel_n.
While at it, move the tien variable assignment near to tssr.
Fixes: 0d7605e75ac2 ("irqchip: Add RZ/V2H(P) Interrupt Control Unit (ICU) driver")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250224131253.134199-3-biju.das.jz@bp.renesas.com
Closes: https://lore.kernel.org/CAMuHMdU3xJpz-jh=j7t4JreBat2of2ksP_OR3+nKAoZBr4pSxg@mail.gmail.com
|
||
|
Chen Wang
|
c667415494 |
irqchip: Add the Sophgo SG2042 MSI interrupt controller
Add driver for Sophgo SG2042 MSI interrupt controller. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Inochi Amaoto <inochiama@gmail.com> Link: https://lore.kernel.org/all/3104216ca90a5f532bafb676c1c5b1efb19e94d1.1740535748.git.unicorn_wang@outlook.com |
||
|
Stanimir Varbanov
|
32c6c05466
|
irqchip: Add Broadcom BCM2712 MSI-X interrupt controller
Add an interrupt controller driver for MSI-X Interrupt Peripheral (MIP) hardware block found in BCM2712. The interrupt controller is used to handle MSI-X interrupts from peripherials behind PCIe endpoints like RPi1 south bridge found in RPi5. There are two MIPs on BCM2712, the first has 64 consecutive SPIs assigned to 64 output vectors, and the second has 17 SPIs, but only 8 of them are consecutive starting at the 8th output vector. Signed-off-by: Stanimir Varbanov <svarbanov@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ivan T. Ivanov <iivanov@suse.de> Link: https://lore.kernel.org/r/20250224083559.47645-4-svarbanov@suse.de [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> |
||
|
Jason Gunthorpe
|
96093fe54f |
irqchip: Have CONFIG_IRQ_MSI_IOMMU be selected by irqchips that need it
Currently, IRQ_MSI_IOMMU is selected if DMA_IOMMU is available to provide an implementation for iommu_dma_prepare/compose_msi_msg(). However, it'll make more sense for irqchips that call prepare/compose to select it, and that will trigger all the additional code and data to be compiled into the kernel. If IRQ_MSI_IOMMU is selected with no IOMMU side implementation, then the prepare/compose() will be NOP stubs. If IRQ_MSI_IOMMU is not selected by an irqchip, then the related code on the iommu side is compiled out. Link: https://patch.msgid.link/r/a2620f67002c5cdf974e89ca3bf905f5c0817be6.1740014950.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Jason Gunthorpe
|
9349887e93 |
genirq/msi: Refactor iommu_dma_compose_msi_msg()
The two-step process to translate the MSI address involves two functions, iommu_dma_prepare_msi() and iommu_dma_compose_msi_msg(). Previously iommu_dma_compose_msi_msg() needed to be in the iommu layer as it had to dereference the opaque cookie pointer. Now, the previous patch changed the cookie pointer into an integer so there is no longer any need for the iommu layer to be involved. Further, the call sites of iommu_dma_compose_msi_msg() all follow the same pattern of setting an MSI message address_hi/lo to non-translated and then immediately calling iommu_dma_compose_msi_msg(). Refactor iommu_dma_compose_msi_msg() into msi_msg_set_addr() that directly accepts the u64 version of the address and simplifies all the callers. Move the new helper to linux/msi.h since it has nothing to do with iommu. Aside from refactoring, this logically prepares for the next patch, which allows multiple implementation options for iommu_dma_prepare_msi(). So, it does not make sense to have the iommu_dma_compose_msi_msg() in dma-iommu.c as it no longer provides the only iommu_dma_prepare_msi() implementation. Link: https://patch.msgid.link/r/eda62a9bafa825e9cdabd7ddc61ad5a21c32af24.1740014950.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Dmitry Osipenko
|
2d81e1bb62 |
irqchip/gic-v3: Add Rockchip 3568002 erratum workaround
Rockchip RK3566/RK3568 GIC600 integration has DDR addressing limited to the first 32bit of physical address space. Rockchip assigned Erratum ID #3568002 for this issue. Add driver quirk for this Rockchip GIC Erratum. Note, that the 0x0201743b GIC600 ID is not Rockchip-specific and is common for many ARM GICv3 implementations. Hence, there is an extra of_machine_is_compatible() check. Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/all/20250216221634.364158-2-dmitry.osipenko@collabora.com |
||
|
Stephan Gerhold
|
e9a48ea4d9 |
irqchip/qcom-pdc: Workaround hardware register bug on X1E80100
On X1E80100, there is a hardware bug in the register logic of the
IRQ_ENABLE_BANK register: While read accesses work on the normal address,
all write accesses must be made to a shifted address. Without a workaround
for this, the wrong interrupt gets enabled in the PDC and it is impossible
to wakeup from deep suspend (CX collapse). This has not caused problems so
far, because the deep suspend state was not enabled. A workaround is
required now since work is ongoing to fix this.
The PDC has multiple "DRV" regions, each one has a size of 0x10000 and
provides the same set of registers for a particular client in the system.
Linux is one the clients and uses DRV region 2 on X1E. Each "bank" inside
the DRV region consists of 32 interrupt pins that can be enabled using the
IRQ_ENABLE_BANK register:
IRQ_ENABLE_BANK[bank] = base + IRQ_ENABLE_BANK + bank * sizeof(u32)
On X1E, this works as intended for read access. However, write access to
most banks is shifted by 2:
IRQ_ENABLE_BANK_X1E[0] = IRQ_ENABLE_BANK[-2]
IRQ_ENABLE_BANK_X1E[1] = IRQ_ENABLE_BANK[-1]
IRQ_ENABLE_BANK_X1E[2] = IRQ_ENABLE_BANK[0] = IRQ_ENABLE_BANK[2 - 2]
IRQ_ENABLE_BANK_X1E[3] = IRQ_ENABLE_BANK[1] = IRQ_ENABLE_BANK[3 - 2]
IRQ_ENABLE_BANK_X1E[4] = IRQ_ENABLE_BANK[2] = IRQ_ENABLE_BANK[4 - 2]
IRQ_ENABLE_BANK_X1E[5] = IRQ_ENABLE_BANK[5] (this one works as intended)
The negative indexes underflow to banks of the previous DRV/client region:
IRQ_ENABLE_BANK_X1E[drv 2][bank 0] = IRQ_ENABLE_BANK[drv 2][bank -2]
= IRQ_ENABLE_BANK[drv 1][bank 5-2]
= IRQ_ENABLE_BANK[drv 1][bank 3]
= IRQ_ENABLE_BANK[drv 1][bank 0 + 3]
IRQ_ENABLE_BANK_X1E[drv 2][bank 1] = IRQ_ENABLE_BANK[drv 2][bank -1]
= IRQ_ENABLE_BANK[drv 1][bank 5-1]
= IRQ_ENABLE_BANK[drv 1][bank 4]
= IRQ_ENABLE_BANK[drv 1][bank 1 + 3]
Introduce a workaround for the bug by matching the qcom,x1e80100-pdc
compatible and apply the offsets as shown above:
- Bank 0...1: previous DRV region, bank += 3
- Bank 1...4: our DRV region, bank -= 2
- Bank 5: our DRV region, no fixup required
The PDC node in the device tree only describes the DRV region for the Linux
client, but the workaround also requires to map parts of the previous DRV
region to issue writes there. To maintain compatibility with old device
trees, obtain the base address of the preceeding region by applying the
-0x10000 offset. Note that this is also more correct from a conceptual
point of view:
It does not really make use of the other region; it just issues shifted
writes that end up in the registers of the Linux associated DRV region 2.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/all/20250218-x1e80100-pdc-hw-wa-v2-1-29be4c98e355@linaro.org
|
||
|
Anup Patel
|
896f8e436f |
irqchip/riscv-imsic: Special handling for non-atomic device MSI update
Devices, which have a non-atomic MSI update, might see an intermediate
state when changing the target IMSIC vector from one CPU to another.
To avoid losing interrupts due to this intermediate state, do the following
just like x86 APIC:
1) First write a temporary IMSIC vector to the device which has the same
MSI address as the old IMSIC vector and MSI data pointing to the new
IMSIC vector.
2) Next write the new IMSIC vector to the device.
Based on the above, the __imsic_local_sync() must check pending status of
both old MSI data and new MSI data on the old CPU. In addition, the
movement of IMSIC vector for non-atomic device MSI update must be done in
interrupt context using IRQCHIP_MOVE_DEFERRED.
Implememnt the logic and enforce the chip flag for PCI/MSI[X].
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-11-apatel@ventanamicro.com
|
||
|
Anup Patel
|
0bd55080ba |
irqchip/riscv-imsic: Avoid interrupt translation in interrupt handler
Currently, imsic_handle_irq() uses generic_handle_domain_irq() to handle the interrupt, which internally has an extra step of resolving hwirq using domain. Avoid the translation step by replacing the hardware interrupt number with the Linux interrupt number in the IMSIC vector data and directly call generic_handle_irq(). Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250217085657.789309-10-apatel@ventanamicro.com |
||
|
Anup Patel
|
51611130d5 |
irqchip/riscv-imsic: Implement irq_force_complete_move() for IMSIC
Implement irq_force_complete_move() for IMSIC driver so that in-flight vector movements on a CPU can be cleaned-up when the CPU goes down. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250217085657.789309-9-apatel@ventanamicro.com |
||
|
Anup Patel
|
0f67911e82 |
irqchip/riscv-imsic: Separate next and previous pointers in IMSIC vector
Currently, there is only one "move" pointer in struct imsic_vector so during vector movement the old vector points to the new vector and new vector points to itself. To support forced cleanup of the old vector, add separate "move_next" and "move_prev" pointers to struct imsic_vector, where during vector movement the "move_next" pointer of the old vector points to the new vector and the "move_prev" pointer of the new vector points to the old vector. Both "move_next" and "move_prev" pointers are cleared separately by __imsic_local_sync() with a restriction that "move_prev" on the new CPU is cleared only after the old CPU has cleared "move_next". Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250217085657.789309-8-apatel@ventanamicro.com |
||
|
Thomas Gleixner
|
fe35ecee8e |
irqchip/riscv-imsic: Move to common MSI library
Simplify the leaf MSI domain handling in the RISC-V IMSIC driver by using msi_lib_init_dev_msi_info() and msi_lib_irq_domain_select() provided by the common MSI library. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250217085657.789309-4-apatel@ventanamicro.com |
||
|
Thomas Gleixner
|
1c000dcaad |
irqchip/irq-msi-lib: Optionally set default irq_eoi()/irq_ack()
msi_lib_init_dev_msi_info() sets the default irq_eoi()/irq_ack() callbacks unconditionally. This is correct for all existing users, but prevents the IMSIC driver to be moved to the MSI library implementation. Introduce chip_flags in struct msi_parent_ops, which instruct the library to selectively set the callbacks depending on the flags, and update all current users to set them. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250217085657.789309-3-apatel@ventanamicro.com |
||
|
Andrew Jones
|
999f458c17 |
irqchip/riscv-imsic: Set irq_set_affinity() for IMSIC base
The IMSIC driver assigns the IMSIC domain specific imsic_irq_set_affinity() callback to the per device leaf MSI domain. That's a layering violation as it is called with the leaf domain data and not with the IMSIC domain data. This prevents moving the IMSIC driver to the common MSI library which uses the generic msi_domain_set_affinity() callback for device MSI domains. Instead of using imsic_irq_set_affinity() for leaf MSI domains, use imsic_irq_set_affinity() for the non-leaf IMSIC base domain and use irq_chip_set_affinity_parent() for leaf MSI domains. [ tglx: Massaged change log ] Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250217085657.789309-2-apatel@ventanamicro.com |
||
|
Fabrizio Castro
|
0699e578e2 |
irqchip/renesas-rzg2l: Simplify checks in rzg2l_irqc_common_init()
Both devm_pm_runtime_enable() and pm_runtime_resume_and_get() return 0 or a negative error code. Simplify the checks done with their respective return values accordingly. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250212182034.366167-7-fabrizio.castro.jz@renesas.com |
||
|
Fabrizio Castro
|
4bd0317ce6 |
irqchip/renesas-rzg2l: Switch to using dev_err_probe()
Make use of dev_err_probe() to simplify rzg2l_irqc_common_init(). Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/all/20250212182034.366167-6-fabrizio.castro.jz@renesas.com |
||
|
Fabrizio Castro
|
bec8a37129 |
irqchip/renesas-rzg2l: Remove pm_put label
No need to keep label `pm_put`, as it's only used once. Call pm_runtime_put() directly from the error path. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/all/20250212182034.366167-5-fabrizio.castro.jz@renesas.com |
||
|
Fabrizio Castro
|
7de11369ef |
irqchip/renesas-rzg2l: Use devm_pm_runtime_enable()
Simplify rzg2l_irqc_common_init() by using devm_pm_runtime_enable(). Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250212182034.366167-4-fabrizio.castro.jz@renesas.com |
||
|
Fabrizio Castro
|
78f384dad0 |
irqchip/renesas-rzg2l: Use devm_reset_control_get_exclusive_deasserted()
Use devm_reset_control_get_exclusive_deasserted() to simplify rzg2l_irqc_common_init(). Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/all/20250212182034.366167-3-fabrizio.castro.jz@renesas.com |
||
|
Fabrizio Castro
|
dd4e17c309 |
irqchip/renesas-rzg2l: Use local dev pointer in rzg2l_irqc_common_init()
Replace direct references to `&pdev->dev` with the local `dev` pointer in rzg2l_irqc_common_init() to avoid redundant dereferencing. Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/all/20250212182034.366167-2-fabrizio.castro.jz@renesas.com |
||
|
Artur Rojek
|
d7e3fd6582 |
irqchip/jcore-aic, clocksource/drivers/jcore: Fix jcore-pit interrupt request
The jcore-aic irqchip does not have separate interrupt numbers reserved for
cpu-local vs global interrupts. Therefore the device drivers need to
request the given interrupt as per CPU interrupt.
69a9dcbd2d65 ("clocksource/drivers/jcore: Use request_percpu_irq()")
converted the clocksource driver over to request_percpu_irq(), but failed
to do add all the required changes, resulting in a failure to register PIT
interrupts.
Fix this by:
1) Explicitly mark the interrupt via irq_set_percpu_devid() in
jcore_pit_init().
2) Enable and disable the per CPU interrupt in the CPU hotplug callbacks.
3) Pass the correct per-cpu cookie to the irq handler by using
handle_percpu_devid_irq() instead of handle_percpu_irq() in
handle_jcore_irq().
[ tglx: Massage change log ]
Fixes: 69a9dcbd2d65 ("clocksource/drivers/jcore: Use request_percpu_irq()")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/all/20250216175545.35079-3-contact@artur-rojek.eu
|
||
|
Marc Zyngier
|
4cb7779384 |
irqchip/gic-v3: Fix rk3399 workaround when secure interrupts are enabled
Christoph reports that their rk3399 system dies since commit 773c05f417fa1
("irqchip/gic-v3: Work around insecure GIC integrations").
It appears that some rk3399 have secure payloads, and that the firmware
sets SCR_EL3.FIQ==1. Obivously, disabling security in that configuration
leads to even more problems.
Revisit the workaround by:
- making it rk3399 specific
- checking whether Group-0 is available, which is a good proxy
for SCR_EL3.FIQ being 0
- either apply the workaround if Group-0 is available, or disable
pseudo-NMIs if not
Note that this doesn't mean that the secure side is able to receive
interrupts, as all interrupts are made non-secure anyway.
Clearly, nobody ever tested secure interrupts on this platform.
Fixes: 773c05f417fa1 ("irqchip/gic-v3: Work around insecure GIC integrations")
Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250215185241.3768218-1-maz@kernel.org
Closes: https://lore.kernel.org/r/b1266652fb64857246e8babdf268d0df8f0c36d9.camel@googlemail.com
|
||
|
Geert Uytterhoeven
|
29a61a1f40 |
genirq: Remove leading space from irq_chip::irq_print_chip() callbacks
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space. Remove the superfluous double spaces.
Fixes: 9d9f204bdf7243bf ("genirq/proc: Add missing space separator back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/893f7e9646d8933cd6786d5a1ef3eb076d263768.1738764803.git.geert+renesas@glider.be
|
||
|
Vladimir Kondratiev
|
b93afe8a3a |
irqchip/riscv-aplic: Add support for hart indexes
RISC-V APLIC specification defines "hart index" in: https://github.com/riscv/riscv-aia Within a given interrupt domain, each of the domain’s harts has a unique index number in the range 0 to 2^14 − 1 (= 16,383). The index number a domain associates with a hart may or may not have any relationship to the unique hart identifier (“hart ID”) that the RISC-V Privileged Architecture assigns to the hart. Two different interrupt domains may employ entirely different index numbers for the same set of harts. Further, this document says in "4.5 Memory-mapped control region for an interrupt domain": The array of IDC structures may include some for potential hart index numbers that are not actual hart index numbers in the domain. For example, the first IDC structure is always for hart index 0, but 0 is not necessarily a valid index number for any hart in the domain. Support arbitrary hart indices specified in an optional APLIC property "riscv,hart-indexes" which is specified as an array of u32 elements, one per interrupt target. If this property is not specified, fallback to use logical hart indices within the domain. Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/all/20250129091637.1667279-3-vladimir.kondratiev@mobileye.com |
||
|
Nick Chan
|
698244bbb3 |
irqchip/apple-aic: Only handle PMC interrupt as FIQ when configured so
The CPU PMU in Apple SoCs can be configured to fire its interrupt in one of
several ways, and since Apple A11 one of the methods is FIQ, but the check
of the configuration register fails to test explicitely for FIQ mode. It
tests whether the IMODE bitfield is zero or not and the PMCRO_IACT bit is
set. That results in false positives when the IMODE bitfield is not zero,
but does not have the mode PMCR0_IMODE_FIQ.
Only handle the PMC interrupt as a FIQ when the CPU PMU has been configured
to fire FIQs, i.e. the IMODE bitfield value is PMCR0_IMODE_FIQ and
PMCR0_IACT is set.
Fixes: c7708816c944 ("irqchip/apple-aic: Wire PMU interrupts")
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250118163554.16733-1-towinchenmi@gmail.com
|
||
|
Stefan Eichenberger
|
987f379b54 |
irqchip/irq-mvebu-icu: Fix access to msi_data from irq_domain::host_data
mvebu_icu_translate() incorrectly casts irq_domain::host_data directly to
mvebu_icu_msi_data. However, host_data actually points to a structure of
type msi_domain_info.
This incorrect cast causes issues such as the thermal sensors of the
CP110 platform malfunctioning. Specifically, the translation of the SEI
interrupt to IRQ_TYPE_EDGE_RISING fails, preventing proper interrupt
handling. The following error was observed:
genirq: Setting trigger mode 4 for irq 85 failed (irq_chip_set_type_parent+0x0/0x34)
armada_thermal f2400000.system-controller:thermal-sensor@70: Cannot request threaded IRQ 85
Resolve the issue by first casting host_data to msi_domain_info and then
accessing mvebu_icu_msi_data through msi_domain_info::chip_data.
Fixes: d929e4db22b6 ("irqchip/irq-mvebu-icu: Prepare for real per device MSI")
Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250124085140.44792-1-eichest@gmail.com
|
||
|
Xu Lu
|
825c78e6a6 |
irqchip/riscv: Ensure ordering of memory writes and IPI writes
RISC-V distinguishes between memory accesses and device I/O and uses FENCE instruction to order them as viewed by other RISC-V harts and external devices or coprocessors. The FENCE instruction can order any combination of device input(I), device output(O), memory reads(R) and memory writes(W). For example, 'fence w, o' is used to ensure all memory writes from instructions preceding the FENCE instruction appear earlier in the global memory order than device output writes from instructions after the FENCE instruction. RISC-V issues IPIs by writing to the IMSIC/ACLINT MMIO registers, which is regarded as device output operation. However, the existing implementation of the IMSIC/ACLINT drivers issue the IPI via writel_relaxed(), which does not guarantee the order of device output operation and preceding memory writes. As a consequence the hart receiving the IPI might not observe the IPI related data. Fix this by replacing writel_relaxed() with writel() when issuing IPIs, which uses 'fence w, o' to ensure all previous writes made by the current hart are visible to other harts before they receive the IPI. Signed-off-by: Xu Lu <luxu.kernel@bytedance.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250127093846.98625-1-luxu.kernel@bytedance.com |