Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform bus
interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mNdQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylktACfYJix41jCCDbiFjnu7Hz4OIdcrUsAnRyF164M
1n5MhEhsEmvQj7WBwQLE
=AmmW
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
Toolchain and infrastructure:
- Extract the 'pin-init' API from the 'kernel' crate and make it into
a standalone crate.
In order to do this, the contents are rearranged so that they can
easily be kept in sync with the version maintained out-of-tree that
other projects have started to use too (or plan to, like QEMU).
This will reduce the maintenance burden for Benno, who will now have
his own sub-tree, and will simplify future expected changes like the
move to use 'syn' to simplify the implementation.
- Add '#[test]'-like support based on KUnit.
We already had doctests support based on KUnit, which takes the
examples in our Rust documentation and runs them under KUnit.
Now, we are adding the beginning of the support for "normal" tests,
similar to those the '#[test]' tests in userspace Rust. For instance:
#[kunit_tests(my_suite)]
mod tests {
#[test]
fn my_test() {
assert_eq!(1 + 1, 2);
}
}
Unlike with doctests, the 'assert*!'s do not map to the KUnit
assertion APIs yet.
- Check Rust signatures at compile time for functions called from C by
name.
In particular, introduce a new '#[export]' macro that can be placed
in the Rust function definition. It will ensure that the function
declaration on the C side matches the signature on the Rust function:
#[export]
pub unsafe extern "C" fn my_function(a: u8, b: i32) -> usize {
// ...
}
The macro essentially forces the compiler to compare the types of
the actual Rust function and the 'bindgen'-processed C signature.
These cases are rare so far. In the future, we may consider
introducing another tool, 'cbindgen', to generate C headers
automatically. Even then, having these functions explicitly marked
may be a good idea anyway.
- Enable the 'raw_ref_op' Rust feature: it is already stable, and
allows us to use the new '&raw' syntax, avoiding a couple macros.
After everyone has migrated, we will disallow the macros.
- Pass the correct target to 'bindgen' on Usermode Linux.
- Fix 'rusttest' build in macOS.
'kernel' crate:
- New 'hrtimer' module: add support for setting up intrusive timers
without allocating when starting the timer. Add support for
'Pin<Box<_>>', 'Arc<_>', 'Pin<&_>' and 'Pin<&mut _>' as pointer types
for use with timer callbacks. Add support for setting clock source
and timer mode.
- New 'dma' module: add a simple DMA coherent allocator abstraction and
a test sample driver.
- 'list' module: make the linked list 'Cursor' point between elements,
rather than at an element, which is more convenient to us and allows
for cursors to empty lists; and document it with examples of how to
perform common operations with the provided methods.
- 'str' module: implement a few traits for 'BStr' as well as the
'strip_prefix()' method.
- 'sync' module: add 'Arc::as_ptr'.
- 'alloc' module: add 'Box::into_pin'.
- 'error' module: extend the 'Result' documentation, including a few
examples on different ways of handling errors, a warning about using
methods that may panic, and links to external documentation.
'macros' crate:
- 'module' macro: add the 'authors' key to support multiple authors.
The original key will be kept until everyone has migrated.
Documentation:
- Add error handling sections.
MAINTAINERS:
- Add Danilo Krummrich as reviewer of the Rust "subsystem".
- Add 'RUST [PIN-INIT]' entry with Benno Lossin as maintainer. It has
its own sub-tree.
- Add sub-tree for 'RUST [ALLOC]'.
- Add 'DMA MAPPING HELPERS DEVICE DRIVER API [RUST]' entry with Abdiel
Janulgue as primary maintainer. It will go through the sub-tree of
the 'RUST [ALLOC]' entry.
- Add 'HIGH-RESOLUTION TIMERS [RUST]' entry with Andreas Hindborg as
maintainer. It has its own sub-tree.
And a few other cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=PCxf
-----END PGP SIGNATURE-----
Merge tag 'rust-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Extract the 'pin-init' API from the 'kernel' crate and make it into
a standalone crate.
In order to do this, the contents are rearranged so that they can
easily be kept in sync with the version maintained out-of-tree that
other projects have started to use too (or plan to, like QEMU).
This will reduce the maintenance burden for Benno, who will now
have his own sub-tree, and will simplify future expected changes
like the move to use 'syn' to simplify the implementation.
- Add '#[test]'-like support based on KUnit.
We already had doctests support based on KUnit, which takes the
examples in our Rust documentation and runs them under KUnit.
Now, we are adding the beginning of the support for "normal" tests,
similar to those the '#[test]' tests in userspace Rust. For
instance:
#[kunit_tests(my_suite)]
mod tests {
#[test]
fn my_test() {
assert_eq!(1 + 1, 2);
}
}
Unlike with doctests, the 'assert*!'s do not map to the KUnit
assertion APIs yet.
- Check Rust signatures at compile time for functions called from C
by name.
In particular, introduce a new '#[export]' macro that can be placed
in the Rust function definition. It will ensure that the function
declaration on the C side matches the signature on the Rust
function:
#[export]
pub unsafe extern "C" fn my_function(a: u8, b: i32) -> usize {
// ...
}
The macro essentially forces the compiler to compare the types of
the actual Rust function and the 'bindgen'-processed C signature.
These cases are rare so far. In the future, we may consider
introducing another tool, 'cbindgen', to generate C headers
automatically. Even then, having these functions explicitly marked
may be a good idea anyway.
- Enable the 'raw_ref_op' Rust feature: it is already stable, and
allows us to use the new '&raw' syntax, avoiding a couple macros.
After everyone has migrated, we will disallow the macros.
- Pass the correct target to 'bindgen' on Usermode Linux.
- Fix 'rusttest' build in macOS.
'kernel' crate:
- New 'hrtimer' module: add support for setting up intrusive timers
without allocating when starting the timer. Add support for
'Pin<Box<_>>', 'Arc<_>', 'Pin<&_>' and 'Pin<&mut _>' as pointer
types for use with timer callbacks. Add support for setting clock
source and timer mode.
- New 'dma' module: add a simple DMA coherent allocator abstraction
and a test sample driver.
- 'list' module: make the linked list 'Cursor' point between
elements, rather than at an element, which is more convenient to us
and allows for cursors to empty lists; and document it with
examples of how to perform common operations with the provided
methods.
- 'str' module: implement a few traits for 'BStr' as well as the
'strip_prefix()' method.
- 'sync' module: add 'Arc::as_ptr'.
- 'alloc' module: add 'Box::into_pin'.
- 'error' module: extend the 'Result' documentation, including a few
examples on different ways of handling errors, a warning about
using methods that may panic, and links to external documentation.
'macros' crate:
- 'module' macro: add the 'authors' key to support multiple authors.
The original key will be kept until everyone has migrated.
Documentation:
- Add error handling sections.
MAINTAINERS:
- Add Danilo Krummrich as reviewer of the Rust "subsystem".
- Add 'RUST [PIN-INIT]' entry with Benno Lossin as maintainer. It has
its own sub-tree.
- Add sub-tree for 'RUST [ALLOC]'.
- Add 'DMA MAPPING HELPERS DEVICE DRIVER API [RUST]' entry with
Abdiel Janulgue as primary maintainer. It will go through the
sub-tree of the 'RUST [ALLOC]' entry.
- Add 'HIGH-RESOLUTION TIMERS [RUST]' entry with Andreas Hindborg as
maintainer. It has its own sub-tree.
And a few other cleanups and improvements"
* tag 'rust-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (71 commits)
rust: dma: add `Send` implementation for `CoherentAllocation`
rust: macros: fix `make rusttest` build on macOS
rust: block: refactor to use `&raw mut`
rust: enable `raw_ref_op` feature
rust: uaccess: name the correct function
rust: rbtree: fix comments referring to Box instead of KBox
rust: hrtimer: add maintainer entry
rust: hrtimer: add clocksource selection through `ClockId`
rust: hrtimer: add `HrTimerMode`
rust: hrtimer: implement `HrTimerPointer` for `Pin<Box<T>>`
rust: alloc: add `Box::into_pin`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&mut T>`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&T>`
rust: hrtimer: add `hrtimer::ScopedHrTimerPointer`
rust: hrtimer: add `UnsafeHrTimerPointer`
rust: hrtimer: allow timer restart from timer handler
rust: str: implement `strip_prefix` for `BStr`
rust: str: implement `AsRef<BStr>` for `[u8]` and `BStr`
rust: str: implement `Index` for `BStr`
rust: str: implement `PartialEq` for `BStr`
...
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do
firmware updates in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs
-----BEGIN PGP SIGNATURE-----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=oK/N
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
-----BEGIN PGP SIGNATURE-----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=oxfV
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Various minor updates to the LSM Rust bindings
Changes include marking trivial Rust bindings as inlines and comment
tweaks to better reflect the LSM hooks.
- Add LSM/SELinux access controls to io_uring_allowed()
Similar to the io_uring_disabled sysctl, add a LSM hook to
io_uring_allowed() to enable LSMs a simple way to enforce security
policy on the use of io_uring. This pull request includes SELinux
support for this new control using the io_uring/allowed permission.
- Remove an unused parameter from the security_perf_event_open() hook
The perf_event_attr struct parameter was not used by any currently
supported LSMs, remove it from the hook.
- Add an explicit MAINTAINERS entry for the credentials code
We've seen problems in the past where patches to the credentials code
sent by non-maintainers would often languish on the lists for
multiple months as there was no one explicitly tasked with the
responsibility of reviewing and/or merging credentials related code.
Considering that most of the code under security/ has a vested
interest in ensuring that the credentials code is well maintained,
I'm volunteering to look after the credentials code and Serge Hallyn
has also volunteered to step up as an official reviewer. I posted the
MAINTAINERS update as a RFC to LKML in hopes that someone else would
jump up with an "I'll do it!", but beyond Serge it was all crickets.
- Update Stephen Smalley's old email address to prevent confusion
This includes a corresponding update to the mailmap file.
* tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
mailmap: map Stephen Smalley's old email addresses
lsm: remove old email address for Stephen Smalley
MAINTAINERS: add Serge Hallyn as a credentials reviewer
MAINTAINERS: add an explicit credentials entry
cred,rust: mark Credential methods inline
lsm,rust: reword "destroy" -> "release" in SecurityCtx
lsm,rust: mark SecurityCtx methods inline
perf: Remove unnecessary parameter of security check
lsm: fix a missing security_uring_allowed() prototype
io_uring,lsm,selinux: add LSM hooks for io_uring_setup()
io_uring: refactor io_uring_allowed()
Introduce Rust support for the `hrtimer` subsystem:
- Add a way to use the `hrtimer` subsystem from Rust. Rust code can now set up
intrusive timers without allocating when starting the timer.
- Add support for `Pin<Box<_>>`, `Arc<_>`, `Pin<&_>` and `Pin<&mut _>` as
pointer types for use with timer callbacks.
- Add support for setting clock source and timer mode.
`kernel` crate:
- Add `Arc::as_ptr` for converting an `Arc` to a raw pointer. This is a
dependency for the `hrtimer` API.
- Add `Box::into_pin` for converting a `Box<_>` into a `Pin<Box<_>>` to align
with Rust `alloc`. This is a dependency for the `hrtimer` API.
-----BEGIN PGP SIGNATURE-----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=vNJu
-----END PGP SIGNATURE-----
Merge tag 'rust-hrtimer-for-v6.15-v3' of https://github.com/Rust-for-Linux/linux into rust-next
Pull rust-hrtimer updates from Andreas Hindborg:
"Introduce Rust support for the 'hrtimer' subsystem:
- Add a way to use the 'hrtimer' subsystem from Rust. Rust code can
now set up intrusive timers without allocating when starting the
timer.
- Add support for 'Pin<Box<_>>', 'Arc<_>', 'Pin<&_>' and
'Pin<&mut _>' as pointer types for use with timer callbacks.
- Add support for setting clock source and timer mode.
'kernel' crate:
- Add 'Arc::as_ptr' for converting an 'Arc' to a raw pointer. This is
a dependency for the 'hrtimer' API.
- Add 'Box::into_pin' for converting a 'Box<_>' into a 'Pin<Box<_>>'
to align with Rust 'alloc'. This is a dependency for the 'hrtimer'
API."
* tag 'rust-hrtimer-for-v6.15-v3' of https://github.com/Rust-for-Linux/linux:
rust: hrtimer: add maintainer entry
rust: hrtimer: add clocksource selection through `ClockId`
rust: hrtimer: add `HrTimerMode`
rust: hrtimer: implement `HrTimerPointer` for `Pin<Box<T>>`
rust: alloc: add `Box::into_pin`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&mut T>`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&T>`
rust: hrtimer: add `hrtimer::ScopedHrTimerPointer`
rust: hrtimer: add `UnsafeHrTimerPointer`
rust: hrtimer: allow timer restart from timer handler
rust: hrtimer: implement `HrTimerPointer` for `Arc`
rust: sync: add `Arc::as_ptr`
rust: hrtimer: introduce hrtimer support
Just one commit to expose system BH workqueues to rust.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ9xJ1A4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGfiVAP4+zWr3XRWe53iAhBQxBKGDNcfKZAZ/xywRmTvh
sd9CywEAtTHy4u+9C1NzDW0XToUfKMhsAJuYFO6S/OpYEn2R6QQ=
=z9C+
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue update from Tejun Heo:
"Just one commit to expose system BH workqueues to rust"
* tag 'wq-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rust: workqueue: define built-in bh queues
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90sSwAKCRCRxhvAZXjc
oqodAP9rJCUOpfqV0Sh25TiyTbG/+62ZquZfUkqivnnpoz/XyAEApPPENf2qzcbz
aTHx9U7w+lDG+W/CgmTGkOnYvly9Qg4=
=Xja1
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rust updates from Christian Brauner:
"This contains minor fixes and improvements to rust file bindings:
- Optimize rust symbol generation for FileDescriptorReservation
- Optimize rust symbol generation for SeqFile"
* tag 'vfs-6.15-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: optimize rust symbol generation for SeqFile
rust: file: optimize rust symbol generation for FileDescriptorReservation
Stephen found a future build failure in linux-next [1]:
error[E0277]: `*mut MyStruct` cannot be sent between threads safely
--> samples/rust/rust_dma.rs:47:22
|
47 | impl pci::Driver for DmaSampleDriver {
| ^^^^^^^^^^^^^^^ `*mut MyStruct` cannot be sent between threads safely
It is caused by the interaction between commit 935e1d90bf6f ("rust: pci:
require Send for Driver trait implementers") from the driver-core tree,
which fixes a missing concurrency requirement, and commit 9901addae63b
("samples: rust: add Rust dma test sample driver") which adds a sample
that does not satisfy that requirement.
Add a `Send` implementation to `CoherentAllocation`, which allows the
sample (and other future users) to satisfy it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250324215702.1515ba92@canb.auug.org.au/ [1]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250324174048.1075597-1-ojeda@kernel.org
[ Added number to Closes. Fix typo spotted by Boqun. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Replace all occurrences (one) of `addr_of_mut!(place)` with
`&raw mut place`.
This will allow us to reduce macro complexity, and improve consistency
with existing reference syntax as `&raw mut` is similar to `&mut` making
it fit more naturally with other existing code.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/1148
Signed-off-by: Antonio Hickey <contact@antoniohickey.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250320020740.1631171-17-contact@antoniohickey.com
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Since Rust 1.82.0 the `raw_ref_op` feature is stable [1].
By enabling this feature we can use `&raw const place` and
`&raw mut place` instead of using `addr_of!(place)` and
`addr_of_mut!(place)` macros.
Allowing us to reduce macro complexity, and improve consistency
with existing reference syntax as `&raw const`, `&raw mut` are
similar to `&`, `&mut` making it fit more naturally with other
existing code.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/1148
Link: https://blog.rust-lang.org/2024/10/17/Rust-1.82.0.html#native-syntax-for-creating-a-raw-pointer [1]
Signed-off-by: Antonio Hickey <contact@antoniohickey.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250320020740.1631171-2-contact@antoniohickey.com
[ Removed dashed line change as discussed. Added Link to the explanation
of the feature in the Rust 1.82.0 release blog post. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Correctly refer to `reserve` rather than `try_reserve` in a comment. This
comment has been incorrect since inception in commit 1b580e7b9ba2 ("rust:
uaccess: add userspace pointers").
Fixes: 1b580e7b9ba2 ("rust: uaccess: add userspace pointers")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://lore.kernel.org/r/20250317-uaccess-typo-reserve-v1-1-bbfcb45121f3@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Several safety comments in the RBTree implementation still refer to
"Box::from_raw" and "Box::into_raw", but the code actually uses KBox.
These comments were not updated when the implementation transitioned
from using Box to KBox.
Fixes: 8373147ce496 ("rust: treewide: switch to our kernel `Box` type")
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250315-rbtree-comment-fixes-v1-1-51f72c420ff0@posteo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Allow selecting a clock source for timers by passing a `ClockId`
variant to `HrTimer::new`.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-12-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Allow selection of timer mode by passing a `HrTimerMode` variant to
`HrTimer::new`.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-11-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Allow `Pin<Box<T>>` to be the target of a timer callback.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-10-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add an associated function to convert a `Box<T>` into a `Pin<Box<T>>`.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-9-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Allow pinned mutable references to structs that contain a `HrTimer` node to
be scheduled with the `hrtimer` subsystem.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-8-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Allow pinned references to structs that contain a `HrTimer` node to be
scheduled with the `hrtimer` subsystem.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-7-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add the trait `ScopedHrTimerPointer` to allow safe use of stack allocated
timers. Safety is achieved by pinning the stack in place while timers are
running.
Implement the trait for all types that implement `UnsafeHrTimerPointer`.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-6-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Allow timer handlers to report that they want a timer to be restarted after
the timer handler has finished executing.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-4-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Implement `strip_prefix` for `BStr` by deferring to `slice::strip_prefix`
on the underlying `&[u8]`.
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250227-module-params-v3-v8-4-ceeee85d9347@kernel.org
[ Pluralized section name. Hid `use`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Implement `AsRef<BStr>` for `[u8]` and `BStr` so these can be used
interchangeably for operations on `BStr`.
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250227-module-params-v3-v8-3-ceeee85d9347@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `Index` implementation on `BStr` was lost when we switched `BStr` from
a type alias of `[u8]` to a newtype. Add back `Index` by implementing
`Index` for `BStr` when `Index` would be implemented for `[u8]`.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250227-module-params-v3-v8-2-ceeee85d9347@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Implement `PartialEq` for `BStr` by comparing underlying byte slices.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250227-module-params-v3-v8-1-ceeee85d9347@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a simple dma coherent allocator rust abstraction. Based on
Andreas Hindborg's dma abstractions from the rnvme driver, which
was also based on earlier work by Wedson Almeida Filho.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250317185345.2608976-3-abdiel.janulgue@gmail.com
Nacked-by: Christoph Hellwig <hch@lst.de>
[ Removed period. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Trivial addition for missing EOVERFLOW error. This is used by a
subsequent patch that might require returning EOVERFLOW as a result
of `checked_mul`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250317185345.2608976-2-abdiel.janulgue@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The instance of Self, returned and created by Driver::probe() is
dropped in the bus' remove() callback.
Request implementers of the Driver trait to implement Send, since the
remove() callback is not guaranteed to run from the same thread as
probe().
Fixes: 683a63befc73 ("rust: platform: add basic platform device / driver abstractions")
Cc: stable <stable@kernel.org>
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/lkml/Z9rDxOJ2V2bPjj5i@google.com/
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250319145350.69543-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The instance of Self, returned and created by Driver::probe() is
dropped in the bus' remove() callback.
Request implementers of the Driver trait to implement Send, since the
remove() callback is not guaranteed to run from the same thread as
probe().
Fixes: 1bd8b6b2c5d3 ("rust: pci: add basic PCI device / driver abstractions")
Cc: stable <stable@kernel.org>
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/lkml/Z9rDxOJ2V2bPjj5i@google.com/
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250319145350.69543-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some cases, we need to call test-only code from outside the test
case, for example, to mock a function or a module.
In order to check whether we are in a test or not, we need to test if
`CONFIG_KUNIT` is set.
Unfortunately, we cannot rely only on this condition because:
- a test could be running in another thread,
- some distros compile KUnit in production kernels, so checking at runtime
that `current->kunit_test != NULL` is required.
Forturately, KUnit provides an optimised check in
`kunit_get_current_test()`, which checks CONFIG_KUNIT, a global static
key, and then the current thread's running KUnit test.
Add a safe wrapper function around this to know whether or not we are in
a KUnit test and examples showing how to mock a function and a module.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250307090103.918788-4-davidgow@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a new procedural macro (`#[kunit_tests(kunit_test_suit_name)]`) to
run KUnit tests using a user-space like syntax.
The macro, that should be used on modules, transforms every `#[test]`
in a `kunit_case!` and adds a `kunit_unsafe_test_suite!` registering
all of them.
The only difference with user-space tests is that instead of using
`#[cfg(test)]`, `#[kunit_tests(kunit_test_suit_name)]` is used.
Note that `#[cfg(CONFIG_KUNIT)]` is added so the test module is not
compiled when `CONFIG_KUNIT` is set to `n`.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250307090103.918788-3-davidgow@google.com
[ Removed spurious (in rendered form) newline in docs. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a couple of Rust const functions and macros to allow to develop
KUnit tests without relying on generated C code:
- The `kunit_unsafe_test_suite!` Rust macro is similar to the
`kunit_test_suite` C macro. It requires a NULL-terminated array of
test cases (see below).
- The `kunit_case` Rust function is similar to the `KUNIT_CASE` C macro.
It generates as case from the name and function.
- The `kunit_case_null` Rust function generates a NULL test case, which
is to be used as delimiter in `kunit_test_suite!`.
While these functions and macros can be used on their own, a future
patch will introduce another macro to create KUnit tests using a
user-space like syntax.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Co-developed-by: Matt Gilbride <mattgilbride@google.com>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250307090103.918788-2-davidgow@google.com
[ Applied Markdown in comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Commit 4d320e30ee04 ("rust: platform: fix unrestricted &mut
platform::Device") changed the definition of platform::Device and
discarded the implicitly derived Send and Sync traits.
This isn't required by upstream code yet, and hence did not cause any
issues. However, it is relied on by upcoming drivers, hence add it back
in.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250318212940.137577-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7b948a2af6b5 ("rust: pci: fix unrestricted &mut pci::Device")
changed the definition of pci::Device and discarded the implicitly
derived Send and Sync traits.
This isn't required by upstream code yet, and hence did not cause any
issues. However, it is relied on by upcoming drivers, hence add it back
in.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250318212940.137577-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When build the kernel using the llvm-18.1.3-rust-1.85.0-x86_64
with ARCH=arm64, the following symbols are generated:
$nm vmlinux | grep ' _R'.*SeqFile | rustfilt
ffff8000805b78ac T <kernel::seq_file::SeqFile>::call_printf
This Rust symbol is trivial wrappers around the C functions seq_printf.
It doesn't make sense to go through a trivial wrapper for its functions,
so mark it inline.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Kunwu Chan <kunwu.chan@hotmail.com>
Link: https://lore.kernel.org/r/20250317030418.2371265-1-kunwu.chan@linux.dev
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When build the kernel using the llvm-18.1.3-rust-1.85.0-x86_64
with ARCH=arm64, the following symbols are generated:
$ nm vmlinux | grep ' _R'.*FileDescriptorReservation | rustfilt
... T <kernel::fs::file::FileDescriptorReservation>::fd_install
... T <kernel::fs::file::FileDescriptorReservation>::get_unused_fd_flags
... T <kernel::fs::file::FileDescriptorReservation as core::ops::drop::Drop>::drop
These Rust symbols are trivial wrappers around the C functions
fd_install, put_unused_fd and put_task_struct. It
doesn't make sense to go through a trivial wrapper for these
functions, so mark them inline.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Kunwu Chan <kunwu.chan@hotmail.com>
Link: https://lore.kernel.org/r/20250317023702.2360726-1-kunwu.chan@linux.dev
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
As by now, platform::Device is implemented as:
#[derive(Clone)]
pub struct Device(ARef<device::Device>);
This may be convenient, but has the implication that drivers can call
device methods that require a mutable reference concurrently at any
point of time.
Instead define platform::Device as
pub struct Device<Ctx: DeviceContext = Normal>(
Opaque<bindings::platform_dev>,
PhantomData<Ctx>,
);
and manually implement the AlwaysRefCounted trait.
With this we can implement methods that should only be called from
bus callbacks (such as probe()) for platform::Device<Core>. Consequently,
we make this type accessible in bus callbacks only.
Arbitrary references taken by the driver are still of type
ARef<platform::Device> and hence don't provide access to methods that are
reserved for bus callbacks.
Fixes: 683a63befc73 ("rust: platform: add basic platform device / driver abstractions")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250314160932.100165-5-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As by now, pci::Device is implemented as:
#[derive(Clone)]
pub struct Device(ARef<device::Device>);
This may be convenient, but has the implication that drivers can call
device methods that require a mutable reference concurrently at any
point of time.
Instead define pci::Device as
pub struct Device<Ctx: DeviceContext = Normal>(
Opaque<bindings::pci_dev>,
PhantomData<Ctx>,
);
and manually implement the AlwaysRefCounted trait.
With this we can implement methods that should only be called from
bus callbacks (such as probe()) for pci::Device<Core>. Consequently, we
make this type accessible in bus callbacks only.
Arbitrary references taken by the driver are still of type
ARef<pci::Device> and hence don't provide access to methods that are
reserved for bus callbacks.
Fixes: 1bd8b6b2c5d3 ("rust: pci: add basic PCI device / driver abstractions")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250314160932.100165-4-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some bus device functions should only be called from bus callbacks,
such as probe(), remove(), resume(), suspend(), etc.
To ensure this add device context marker structs, that can be used as
generics for bus device implementations.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250314160932.100165-3-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify enable_device_mem() by using to_result() to handle the return
value of the corresponding FFI call.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250314160932.100165-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename relative paths inside of the crate to still refer to the same
items, also rename paths inside of the kernel crate and adjust the build
system to build the crate.
[ Remove the `expect` (and thus the `lint_reasons` feature) since
the tree now uses `quote!` from `rust/macros/export.rs`. Remove the
`TokenStream` import removal, since it is now used as well.
In addition, temporarily (i.e. just for this commit) use an `--extern
force:alloc` to prevent an unknown `new_uninit` error in the `rustdoc`
target. For context, please see a similar case in:
https://lore.kernel.org/lkml/20240422090644.525520-1-ojeda@kernel.org/
And adjusted the message above. - Miguel ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-16-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Before switching to compile the `pin-init` crate directly, change
any links that would be invalid to links that are valid both before and
after the switch.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-12-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When making pin-init its own crate, `Zeroable` will no longer be defined
by the kernel crate and thus implementing it for `Option<Box<T, A>>` is
no longer possible due to the orphan rule.
For this reason introduce a new `ZeroableOption` trait that circumvents
this problem.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-11-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In order to make pin-init a standalone crate, move kernel-specific code
directly into the kernel crate. Since `Opaque<T>` and `KBox<T>` are part
of the kernel, move their `Zeroable` implementation into the kernel
crate.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250308110339.2997091-10-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In order to make pin-init a standalone crate, move kernel-specific code
directly into the kernel crate. This includes the `InPlaceInit<T>`
trait, its implementations and the implementations of `InPlaceWrite` for
`Arc` and `UniqueArc`. All of these use the kernel's error type which
will become unavailable in pin-init.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-9-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Move the ability to just write `try_pin_init!(Foo { a <- a_init })`
(note the missing `? Error` at the end) into the kernel crate.
Remove this notation from the pin-init crate, since the default when no
error is specified is the kernel-internal `Error` type. Instead add two
macros in the kernel crate that serve this default and are used instead
of the ones from `pin-init`.
This is done, because the `Error` type that is used as the default is
from the kernel crate and it thus prevents making the pin-init crate
standalone.
In order to not cause a build error due to a name overlap, the macros in
the pin-init crate are renamed, but this change is reverted in a future
commit when it is a standalone crate.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-8-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In preparation of splitting off the pin-init crate from the kernel
crate, move all kernel-specific documentation from pin-init back into
the kernel crate.
Also include an example from the user-space version [1] adapted to the
kernel.
The new `init.rs` file will also be populated by kernel-specific
extensions to the pin-init crate by the next commits.
Link: c1417c64c7/src/lib.rs (L161) [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-4-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In preparation of splitting off the pin-init crate from the kernel
crate, move all pin-init API code (including proc-macros) into
`rust/pin-init`.
Moved modules have their import path adjusted via the `#[path = "..."]`
attribute. This allows the files to still be imported in the kernel
crate even though the files are in different directories.
Code that is moved out of files (but the file itself stays where it is)
is imported via the `include!` macro. This also allows the code to be
moved while still being part of the kernel crate.
Note that this commit moves the generics parsing code out of the GPL-2.0
file `rust/macros/helpers.rs` into the Apache-2.0 OR MIT file
`rust/pin_init/internal/src/helpers.rs`. I am the sole author of that
code and it already is available with that license at [1].
The same is true for the entry-points of the proc-macros `pin_data`,
`pinned_drop` and `derive_zeroable` in `rust/macros/lib.rs` that are
moved to `rust/pin_data/internal/src/lib.rs`. Although there are some
smaller patches that fix the doctests.
Link: https://github.com/Rust-for-Linux/pinned-init [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-3-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
