The version number with -rc should be considered older than the final
release.
For example, 6.14-rc1 should be older than 6.14, but to handle this
correctly (just like Debian kernel), "-rc" must be replace with "~rc".
$ dpkg --compare-versions 6.14-rc1 lt 6.14
$ echo $?
1
$ dpkg --compare-versions 6.14~rc1 lt 6.14
$ echo $?
0
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Fix follow warning when 'make ARCH=loongarch64 bindeb-pkg':
** ** ** WARNING ** ** **
Your architecture doesn't have its equivalent
Debian userspace architecture defined!
Falling back to the current host architecture (loong64).
Please add support for loongarch64 to ./scripts/package/mkdebian ...
Reported-by: Shiwei Liu <liushiwei@anheng.com.cn>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'cpio' command is used solely for copying header files to the
temporary directory. However, there is no strong reason to use 'cpio'
for this purpose. For example, scripts/package/install-extmod-build
uses the 'tar' command to copy files.
This commit replaces the use of 'cpio' with 'tar' because 'tar' is
already used in this script to generate kheaders_data.tar.xz anyway.
Performance-wide, there is no significant difference between 'cpio'
and 'tar'.
[Before]
$ rm -fr kheaders; mkdir kheaders
$ time sh -c '
for f in include arch/x86/include
do
find "$f" -name "*.h"
done | cpio --quiet -pd kheaders
'
real 0m0.148s
user 0m0.021s
sys 0m0.140s
[After]
$ rm -fr kheaders; mkdir kheaders
$ time sh -c '
for f in include arch/x86/include
do
find "$f" -name "*.h"
done | tar -c -f - -T - | tar -xf - -C kheaders
'
real 0m0.098s
user 0m0.024s
sys 0m0.131s
Revert commit 69ef0920bdd3 ("Docs: Add cpio requirement to changes.rst")
because 'cpio' is not used anywhere else during the kernel build.
Please note that the built-in initramfs is created by the in-tree tool,
usr/gen_init_cpio, so it does not rely on the external 'cpio' command
at all.
Remove 'cpio' from the package build dependencies as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
'make ARCH=um bindeb-pkg' shows the following warning.
$ make ARCH=um bindeb-pkg
[snip]
GEN debian
** ** ** WARNING ** ** **
Your architecture doesn't have its equivalent
Debian userspace architecture defined!
Falling back to the current host architecture (amd64).
Please add support for um to ./scripts/package/mkdebian ...
This commit hard-codes i386/amd64 because UML is only supported for x86.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Python3 is necessary for running some scripts such as
drivers/gpu/drm/msm/registers/gen_header.py
Both scripts/package/kernel.spec and scripts/package/PKGBUILD already
list Python as the build dependency.
Do likewise for scripts/package/mkdebian.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The Debian kernel supports the pkg.linux.nokerneldbg build profile.
The debug package tends to become huge, and you may not want to build
it even when CONFIG_DEBUG_INFO is enabled.
This commit introduces a similar profile for the upstream kernel.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Since commit f1d87664b82a ("kbuild: cross-compile linux-headers package
when possible"), 'make bindeb-pkg' may attempt to cross-compile the
linux-headers package, but it fails under certain circumstances.
For example, when CONFIG_MODULE_SIG_FORMAT is enabled on Debian, the
following command fails:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg
[ snip ]
Rebuilding host programs with aarch64-linux-gnu-gcc...
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/kallsyms
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sorttable
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/asn1_compiler
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sign-file
In file included from /usr/include/openssl/opensslv.h:109,
from debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sign-file.c:25:
/usr/include/openssl/macros.h:14:10: fatal error: openssl/opensslconf.h: No such file or directory
14 | #include <openssl/opensslconf.h>
| ^~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
This commit adds a new profile, pkg.linux-upstream.nokernelheaders, to
guard the linux-headers package.
There are two options to fix the above issue.
Option 1: Set the pkg.linux-upstream.nokernelheaders build profile
$ DEB_BUILD_PROFILES=pkg.linux-upstream.nokernelheaders \
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg
This skips the building of the linux-headers package.
Option 2: Install the necessary build dependencies
If you want to cross-compile the linux-headers package, you need to
install additional packages.
For example, on Debian, the packages necessary for cross-compiling it
to arm64 can be installed with the following commands:
# dpkg --add-architecture arm64
# apt update
# apt install gcc-aarch64-linux-gnu libssl-dev:arm64
Fixes: f1d87664b82a ("kbuild: cross-compile linux-headers package when possible")
Reported-by: Ron Economos <re@w6rz.net>
Closes: https://lore.kernel.org/all/b3d4f49e-7ddb-29ba-0967-689232329b53@w6rz.net/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Ron Economos <re@w6rz.net>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
${DEBFULLNAME-${user}} falls back to ${user} when DEBFULLNAME is unset.
It is more reasonable to do so when DEBFULLNAME is unset or null.
Otherwise, the command:
$ DEBFULLNAME= make deb-pkg
will leave the name field blank.
The same applies to KBUILD_BUILD_USER and KBUILD_BUILD_HOST.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Set -e to make these scripts fail on the first error.
Set -u because these scripts are invoked by Makefile, and do not work
properly without necessary variables defined.
I tweaked mkdebian to cope with optional environment variables.
Remove the explicit "test -n ..." from install-extmod-build.
Both options are described in POSIX. [1]
[1]: https://pubs.opengroup.org/onlinepubs/009604499/utilities/set.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Commit d5940c60e057 ("kbuild: deb-pkg improve maintainer address
generation") supported the "name <email>" form for DEBEMAIL, with
behavior slightly different from devscripts.
In Kbuild, if DEBEMAIL is given in the form "name <email>", it is used
as-is, and DEBFULLNAME is ignored.
In contrast, debchange takes the name from DEBFULLNAME (or NAME) if set,
as described in 'man debchange':
If this variable has the form "name <email>", then the maintainer name
will also be taken from here if neither DEBFULLNAME nor NAME is set.
This commit removes support for the "name <email> form for DEBEMAIL,
as the current behavior is already different from debchange, and the
Debian manual suggests setting the email address and name separately in
DEBEMAIL and DEBFULLNAME. [1]
If there are any complaints about this removal, we can re-add it,
with better alignment with the debchange implementation. [2]
[1]: https://www.debian.org/doc/manuals/debmake-doc/ch03.en.html#email-setup
[2]: https://salsa.debian.org/debian/devscripts/-/blob/v2.23.7/scripts/debchange.pl#L802
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Commit edec611db047 ("kbuild, deb-pkg: improve maintainer
identification") added the EMAIL and NAME environment variables.
Commit d5940c60e057 ("kbuild: deb-pkg improve maintainer address
generation") removed support for NAME, but kept support for EMAIL.
The EMAIL and NAME environment variables are supported by some tools
(see 'man debchange'), but not by all.
We should support both of them, or neither of them. We should not stop
halfway.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
At first, I thought this script would be needed only in init/Makefile.
However, commit 5db8face97f8 ("kbuild: Restore .version auto-increment
behaviour for Debian packages") and commit 1789fc912541 ("kbuild:
rpm-pkg: invoke the kernel build from rpmbuild for binrpm-pkg")
revealed that it was actually needed for scripts/package/mk* as well.
After all, scripts/ is a better place for it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Commit 36862e14e316 ("kbuild: deb-pkg: use dh_listpackages to know
enabled packages") started to require the debhelper tool suite.
Use more dh_* commands in create_package():
- dh_installdocs to install copyright
- dh_installchangelogs to install changelog
- dh_compress to compress changelog
- dh_fixperms to replace the raw chmod command
- dh_gencontrol to replace the raw dpkg-gencontrol command
- dh_md5sums to record the md5sum of included files
- dh_builddeb to replace the raw dpkg-deb command
Set DEB_RULES_REQUIRES_ROOT to 'no' in case debian/rules is executed
directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
The condition to require libelf-dev:native is stale because objtool is
now enabled by CONFIG_OBJTOOL instead of CONFIG_UNWINDER_ORC. Not only
objtool but also resolve_btfids requires libelf-dev:native; therefore,
CONFIG_DEBUG_INFO_BTF should be checked as well.
Similarly, CONFIG_SYSTEM_TRUSTED_KEYRING is not the only case that
requires libssl-dev:native.
Perhaps, the following code would provide better coverage, but it is
hard to maintain (and may still be imperfect).
if is_enabled CONFIG_OBJTOOL ||
is_enabled CONFIG_DEBUG_INFO_BTF; then
build_depends="${build_depends}, libelf-dev:native"
fi
if is_enabled CONFIG_SYSTEM_TRUSTED_KEYRING ||
is_enabled CONFIG_SYSTEM_REVOCATION_LIST ||
is_enabled CONFIG_MODULE_SIG_FORMAT; then
build_depends="${build_depends}, libssl-dev:native"
fi
Let's hard-code the build dependency.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Copy debian/copyright instead of generating it by the 'cat' command.
I also updated '2018' to '2023' while I was here.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
A little more janitorial work after commit cf8e8658100d ("arch: Remove
Itanium (IA-64) architecture").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
debian/rules is generated by shell, but the escape sequence (\$) is
unreadable.
debian/rules embeds only two variables (ARCH and KERNELRELEASE).
Split them out to debian/rules.vars, and check-in the rest of Makefile
code to scripts/package/debian/rules.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Debian Policy "4.9. Main building script: debian/rules" requires
"debian/rules must start with the line #!/usr/bin/make -f". [1]
Currently, Kbuild does not follow this policy.
When Kbuild generates debian/rules, "#!$(command -v $MAKE) -f" is
expanded by shell. The resuling string may not be "#!/usr/bin/make -f".
There was a reason to opt out the Debian policy.
If you run '/path/to/my/custom/make deb-pkg', debian/rules must also be
invoked by the same Make program. If #!/usr/bin/make were hard-coded in
debian/rules, the sub-make would be executed by a possibly different
Make version.
This is problematic due to the MAKEFLAGS incompatibility, especially the
job server flag. Old Make versions used --jobserver-fds to propagate job
server file descriptors, but Make >= 4.2 uses --jobserver-auth. The flag
disagreement between the parent/child Makes would result in a process
fork explosion.
However, having a non-standard path in the shebang causes another issue;
the generated source package is not portable as such a path does not
exist in other build environments.
This commit solves those conflicting demands.
Hard-code '#!/usr/bin/make -f' in debian/rules to create a portable and
Debian-compliant source package.
Pass '--rules-file=$(MAKE) -f debian/rules' when dpkg-buildpackage is
invoked from Makefile so that debian/rules is executed by the same Make
program as used to start Kbuild.
[1] https://www.debian.org/doc/debian-policy/ch-source.html#main-building-script-debian-rules
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
There are some cases where we want to run a command with the same
environment variables as Kbuild uses. For example, 'make coccicheck'
invokes scripts/coccicheck from the top Makefile so that the script can
reference to ${LINUXINCLUDE}, ${KBUILD_EXTMOD}, etc. The top Makefile
defines several phony targets that run a script.
We do it also for an internally used script, which results in a somewhat
complex call graph.
One example:
debian/rules binary-arch
-> make intdeb-pkg
-> scripts/package/builddeb
It is also tedious to add a dedicated target like 'intdeb-pkg' for each
use case.
Add a generic target 'run-command' to run an arbitrary command in an
environment with all Kbuild variables set.
The usage is:
$ make run-command KBUILD_RUN_COMMAND=<command>
The concept is similar to:
$ dpkg-architecture -c <command>
This executes <command> in an environment which has all DEB_* variables
defined.
Convert the existing 'make intdeb-pkg'.
Another possible usage is to interrogate a Make variable.
$ make run-command KBUILD_RUN_COMMAND='echo $(KBUILD_CFLAGS)'
might be useful to see KBUILD_CFLAGS set by the top Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Refactor scripts/kallsyms to make it faster and easier to maintain
- Clean up menuconfig
- Provide Clang with hard-coded target triple instead of CROSS_COMPILE
- Use -z pack-relative-relocs flags instead of --use-android-relr-tags
for arm64 CONFIG_RELR
- Add srcdeb-pkg target to build only a Debian source package
- Add KDEB_SOURCE_COMPRESS option to specify the compression for a
Debian source package
- Misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=UuFY
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Refactor scripts/kallsyms to make it faster and easier to maintain
- Clean up menuconfig
- Provide Clang with hard-coded target triple instead of CROSS_COMPILE
- Use -z pack-relative-relocs flags instead of --use-android-relr-tags
for arm64 CONFIG_RELR
- Add srcdeb-pkg target to build only a Debian source package
- Add KDEB_SOURCE_COMPRESS option to specify the compression for a
Debian source package
- Misc cleanups and fixes
* tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: specify targets in debian/rules as .PHONY
sparc: unify sparc32/sparc64 archhelp
kbuild: rpm-pkg: remove kernel-drm PROVIDES
kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression
kbuild: add srcdeb-pkg target
Makefile: use -z pack-relative-relocs
kbuild: clang: do not use CROSS_COMPILE for target triple
kconfig: menuconfig: reorder functions to remove forward declarations
kconfig: menuconfig: remove unused M_EVENT macro
kconfig: menuconfig: remove OLD_NCURSES macro
kbuild: builddeb: Eliminate debian/arch use
scripts/kallsyms: update the usage in the comment block
scripts/kallsyms: decrease expand_symbol() / cleanup_symbol_name() calls
scripts/kallsyms: change the output order
scripts/kallsyms: move compiler-generated symbol patterns to mksysmap
scripts/kallsyms: exclude symbols generated by itself dynamically
scripts/mksysmap: use sed with in-line comments
scripts/mksysmap: remove comments described in nm(1)
scripts/kallsyms: remove redundant code for omitting U and N
kallsyms: expand symbol name into comment for debugging
If a file with the same name exists, the target is not run.
For example, the following command fails.
$ make O=build-arch bindeb-pkg
[ snip ]
sed: can't read modules.order: No such file or directory
make[6]: *** [../Makefile:1577: __modinst_pre] Error 2
make[5]: *** [../scripts/Makefile.package:150: intdeb-pkg] Error 2
make[4]: *** [../Makefile:1657: intdeb-pkg] Error 2
make[3]: *** [debian/rules:14: binary-arch] Error 2
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
make[2]: *** [../scripts/Makefile.package:139: bindeb-pkg] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
When the source tree is dirty and contains untracked files, package
builds may fail, for example, when a broken symlink exists, a file
path contains whitespaces, etc.
Since commit 05e96e96a315 ("kbuild: use git-archive for source package
creation"), the source tarball only contains committed files because
it is created by 'git archive'. scripts/package/gen-diff-patch tries
to address the diff from HEAD, but including untracked files by the
hand-crafted script introduces more complexity. I wrote a patch [1] to
make it work in most cases, but still wonder if this is what we should
aim for.
To simplify the code, this patch just gives up untracked files. Going
forward, it is your responsibility to do 'git add' for what you want in
the source package. The script shows a warning just in case you forgot
to do so. It should be checked only when building source packages.
[1]: https://lore.kernel.org/all/CAK7LNAShbZ56gSh9PrbLnBDYKnjtTkHMoCXeGrhcxMvqXGq9=g@mail.gmail.com/2-0001-kbuild-make-package-builds-more-robust.patch
Fixes: 05e96e96a315 ("kbuild: use git-archive for source package creation")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git")
added a new tool, scripts/list-gitignored. My intention was to create
source packages without cleaning the source tree, without relying on git.
Linus strongly objected to it, and suggested using 'git archive' instead.
[1] [2] [3]
This commit goes in that direction - Remove scripts/list-gitignored.c
and rewrites Makefiles and scripts to use 'git archive' for building
Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg'
use 'git archive' again.
Going forward, building source packages is only possible in a git-managed
tree. Building binary packages does not require git.
[1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/
[3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/
Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git")
Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use dh_listpackages to get a list of all binary packages.
With this, debian/control lists which binary packages will be produced.
Previously, ARCH=um listed linux-libc-dev in debian/control, but it
was not generated because each of mkdebian and builddeb independently
maintained the if-conditionals.
Another motivation is to allow scripts/package/builddeb to get the
package name (linux-image-*, etc.) dynamically from debian/control.
This will also allow the BuildProfile to control the generation of
the binary packages.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
KERNELRELEASE does not need to match the package version in changelog.
Rather, it conventially matches what is called 'ABINAME', which is a
part of the binary package names.
Both are the same by default, but the former might be overridden by
KDEB_PKGVERSION. In this case, the resulting package would not boot
because /lib/modules/$(uname -r) does not point the module directory.
Partially revert 3ab18a625ce4 ("kbuild: deb-pkg: improve the usability
of source package").
Reported-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Fixes: 3ab18a625ce4 ("kbuild: deb-pkg: improve the usability of source package")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Since commit c5bf2efb058d ("kbuild: deb-pkg: fix binary-arch and clean
in debian/rules"), the source package generated by 'make deb-pkg' fails
to build.
I terribly missed the fact that the intdeb-pkg target may regenerate
include/config/kernel.release due to the following in the top Makefile:
%pkg: include/config/kernel.release FORCE
Restore KERNELRELEASE= option to avoid the kernel.release disagreement
between build-arch and binary-arch.
Fixes: c5bf2efb058d ("kbuild: deb-pkg: fix binary-arch and clean in debian/rules")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Improve the source package support in case the dpkg-buildpackage is
directly used to build binary packages.
For cross-compiling, you can set CROSS_COMPILE via the environment
variable, but it is better to set it automatically - set it to
${DEB_HOST_GNU_TYPE}- if we are cross-compiling but not from the top
Makefile.
The generated source package may be carried to a different build
environment, which may have a different compiler installed.
Run olddefconfig first to set new CONFIG options to their default
values without prompting.
Take KERNELRELEASE and KBUILD_BUILD_VERSION from the version field of
debian/changelog in case it is updated afterwards.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The clean target needs ARCH=${ARCH} to clean up the tree for the correct
architecture. 'make (bin)deb-pkg' skips cleaning, but the preclean hook
may be executed if dpkg-buildpackage is directly used.
The binary-arch target does not need KERNELRELEASE because it is not
updated during the installation. KBUILD_BUILD_VERSION is not needed
either because binary-arch does not build vmlinux.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Change the source format from "1.0" to "3.0 (quilt)" because it works
more cleanly.
All files except .config and debian/ go into the orig tarball.
Add a single patch, debian/patches/config, and delete the ugly
extend-diff-ignore patterns.
The debian tarball will be compressed into *.debian.tar.xz by default.
If you like to use a different compression mode, you can pass the
command line option, DPKG_FLAGS=-Zgzip, for example.
The orig tarball only supports gzip for now. The combination of
gzip and xz is somewhat clumsy, but it is not a practical problem.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
scripts/Makefile.package does not need to know the value of
KDEB_SOURCENAME because the source name can be taken from
debian/changelog by using dpkg-parsechangelog.
Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to
scripts/package/mkdebian.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
If you run 'make deb-pkg', all objects are lost due to 'make clean',
which makes the incremental builds impossible.
Instead of cleaning, pass the exclude list to tar's --exclude-from
option.
Previously, *.diff.gz contained some check-in files such as
.clang-format, .cocciconfig.
With this commit, *.diff.gz will only contain the .config and debian/.
The other source files will go into the .orig tarball.
linux.tar.gz is rebuilt only when the source files that would go into
the tarball are changed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
For each binary Debian package, a directory with the package name is
created in the debian directory. Correct the generated file matches in the
package's clean target, which were renamed without adjusting the target.
Fixes: 1694e94e4f46 ("builddeb: match temporary directory name to the package name")
Signed-off-by: Bastian Germann <bage@linutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since 2df8220cc511 ("kbuild: build init/built-in.a just once"),
generating Debian packages using 'make bindeb-pkg' results in
packages that are stuck to the same .version, leading to unexpected
behaviours (multiple packages with the same version).
That's because the mkdebian script samples the build version
before building the kernel, and forces the use of that version
number for the actual build.
Restore the previous behaviour by calling init/build-version
instead of reading the .version file. This is likely to result
in too many .version bumps, but this is what was happening before
(although the bump was affecting builds made after the current one).
Fixes: 2df8220cc511 ("kbuild: build init/built-in.a just once")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Hard-code the names of linux-headers and debug packages in the
control file.
The kernel package is different for ARCH=um. Change the code
for better readability.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 269a535ca931 ("modpost: generate vmlinux.symvers and
reuse it for the second modpost"), with CONFIG_MODULES disabled,
"make deb-pkg" (or "make bindeb-pkg") fails with:
find: ‘Module.symvers’: No such file or directory
If CONFIG_MODULES is disabled, it doesn't really make sense to build
the linux-headers package.
Fixes: 269a535ca931 ("modpost: generate vmlinux.symvers and reuse it for the second modpost")
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
These have been required by the Debian policy for a while, even though
the tooling can detect and workaround their omission, but are a hard
requirement when using rootless builds.
[masahiro:
The following Debian policy is particularly important for rootless builds:
"Both binary-* targets should depend on the build target, or on the
appropriate build-arch or build-indep target, so that the package is
built if it has not been already."
]
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This makes it possible to build the Debian packages without requiring
(pseudo-)root privileges, when the build drivers support this mode
of operation.
See-Also: /usr/share/doc/dpkg/rootless-builds.txt.gz
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Creating a Debian package without CONFIG_DEBUG_INFO produces
a warning that no debug package was created.
This patch excludes the debug package from the control file,
if no debug package is created by this configuration.
Signed-off-by: Reinhard Karcher <reinhard.karcher@gmx.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cross compiling the x86 kernel on a non-x86 build machine produces
the following error when CONFIG_UNWINDER_ORC is enabled, regardless
of whether libelf-dev is installed or not.
dpkg-checkbuilddeps: error: Unmet build dependencies: libelf-dev
dpkg-buildpackage: warning: build dependencies/conflicts unsatisfied; aborting
dpkg-buildpackage: warning: (Use -d flag to override.)
Since this is a build time dependency for a build tool, we need to
depend on the native version of libelf-dev so add the appropriate
annotation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We've missed the dependency to rsync, so build fails on
minimal containers.
Fixes: 59b2bd05f5f4 ("kbuild: add 'headers' target to build up uapi headers in usr/include")
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Debian-based distributions place libc header files in a machine
specific directory (/usr/include/<libc-machine>) instead of
/usr/include/asm to support installation of the linux-libc-dev
package from multiple architectures. Move headers installed by
"make headers_install" accordingly using Debian's tuple from
dpkg-architecture (stored in debian/arch).
Signed-off-by: Cedric Hombourger <Cedric_Hombourger@mentor.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* The man page for dpkg-source(1) notes:
> -b, --build directory [format-specific-parameters]
> Build a source package (--build since dpkg 1.17.14).
> <...>
>
> dpkg-source will build the source package with the first
> format found in this ordered list: the format indicated
> with the --format command line option, the format
> indicated in debian/source/format, “1.0”. The fallback
> to “1.0” is deprecated and will be removed at some point
> in the future, you should always document the desired
> source format in debian/source/format. See section
> SOURCE PACKAGE FORMATS for an extensive description of
> the various source package formats.
Thus it would be more foolproof to explicitly use 1.0 (as we always
did) than to rely on dpkg-source's defaults.
* In a similar vein, debian/rules is not made executable by mkdebian,
and dpkg-source warns about that but still silently fixes the file.
Let's be explicit once again.
Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This will be a little more efficient since unset CONFIG options are
stripped away from auto.conf, and we can hard-code the path to auto.conf
since it is never overridden.
include/config/kernel.release is generated before %pkg is run.
So, it is guaranteed auto.conf is up-to-date.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This might be a kind of bike-shed, but I personally prefer grep'able
code.
I often do 'git grep CONFIG_FOO' instead of 'git grep FOO' when I
want to know where that CONFIG option is used.
This makes code longer, but I hope this is acceptable level.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
bison/flex is now needed always for building for kconfig. Some build
dependencies depend on kernel configuration, enable them as needed:
- libelf-dev when UNWINDER_ORC is set
- libssl-dev for SYSTEM_TRUSTED_KEYRING
Since the libssl-dev is needed for extract_cert binary, denote with
:native to install the libssl-dev for the build machines architecture,
rather than for the architecture of the kernel being built.
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <maks@stro.at>
[masahiro.yamada: change 'flex' to 'flex | flex:native' ]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
'$(MAKE) KBUILD_SRC=' changes the working directory back and forth
between objtree and srctree.
It is better to recurse to the top-level Makefile directly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
