Each time a file in policy, that is already opened for read, is opened
for write, a Time-of-Measure-Time-of-Use (ToMToU) integrity violation
audit message is emitted and a violation record is added to the IMA
measurement list. This occurs even if a ToMToU violation has already
been recorded.
Limit the number of ToMToU integrity violations per file open for read.
Note: The IMA_MAY_EMIT_TOMTOU atomic flag must be set from the reader
side based on policy. This may result in a per file open for read
ToMToU violation.
Since IMA_MUST_MEASURE is only used for violations, rename the atomic
IMA_MUST_MEASURE flag to IMA_MAY_EMIT_TOMTOU.
Cc: stable@vger.kernel.org # applies cleanly up to linux-6.6
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Each time a file in policy, that is already opened for write, is opened
for read, an open-writers integrity violation audit message is emitted
and a violation record is added to the IMA measurement list. This
occurs even if an open-writers violation has already been recorded.
Limit the number of open-writers integrity violations for an existing
file open for write to one. After the existing file open for write
closes (__fput), subsequent open-writers integrity violations may be
emitted.
Cc: stable@vger.kernel.org # applies cleanly up to linux-6.6
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Commit 0d73a55208e9 ("ima: re-introduce own integrity cache lock")
mistakenly reverted the performance improvement introduced in commit
42a4c603198f0 ("ima: fix ima_inode_post_setattr"). The unused bit mask was
subsequently removed by commit 11c60f23ed13 ("integrity: Remove unused
macro IMA_ACTION_RULE_FLAGS").
Restore the performance improvement by introducing the new mask
IMA_NONACTION_RULE_FLAGS, equal to IMA_NONACTION_FLAGS without
IMA_NEW_FILE, which is not a rule-specific flag.
Finally, reset IMA_NONACTION_RULE_FLAGS instead of IMA_NONACTION_FLAGS in
process_measurement(), if the IMA_CHANGE_ATTR atomic flag is set (after
file metadata modification).
With this patch, new files for which metadata were modified while they are
still open, can be reopened before the last file close (when security.ima
is written), since the IMA_NEW_FILE flag is not cleared anymore. Otherwise,
appraisal fails because security.ima is missing (files with IMA_NEW_FILE
set are an exception).
Cc: stable@vger.kernel.org # v4.16.x
Fixes: 0d73a55208e9 ("ima: re-introduce own integrity cache lock")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Fix typos and spelling errors in integrity module comments that were
identified using the codespell tool.
No functional changes - documentation only.
Signed-off-by: Tanya Agarwal <tanyaagarwal25699@gmail.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Like direct file execution (e.g. ./script.sh), indirect file execution
(e.g. sh script.sh) needs to be measured and appraised. Instantiate
the new security_bprm_creds_for_exec() hook to measure and verify the
indirect file's integrity. Unlike direct file execution, indirect file
execution is optionally enforced by the interpreter.
Differentiate kernel and userspace enforced integrity audit messages.
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20241212174223.389435-9-mic@digikod.net
Signed-off-by: Kees Cook <kees@kernel.org>
API:
- Add sig driver API.
- Remove signing/verification from akcipher API.
- Move crypto_simd_disabled_for_test to lib/crypto.
- Add WARN_ON for return values from driver that indicates memory corruption.
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API.
- Optimise crc32c code size on x86.
- Optimise crct10dif on arm/arm64.
- Optimise p10-aes-gcm on powerpc.
- Optimise aegis128 on x86.
- Output full sample from test interface in jitter RNG.
- Retry without padata when it fails in pcrypt.
Drivers:
- Add support for Airoha EN7581 TRNG.
- Add support for STM32MP25x platforms in stm32.
- Enable iproc-r200 RNG driver on BCMBCA.
- Add Broadcom BCM74110 RNG driver.
-----BEGIN PGP SIGNATURE-----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=T8pa
-----END PGP SIGNATURE-----
Merge tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add sig driver API
- Remove signing/verification from akcipher API
- Move crypto_simd_disabled_for_test to lib/crypto
- Add WARN_ON for return values from driver that indicates memory
corruption
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API
- Optimise crc32c code size on x86
- Optimise crct10dif on arm/arm64
- Optimise p10-aes-gcm on powerpc
- Optimise aegis128 on x86
- Output full sample from test interface in jitter RNG
- Retry without padata when it fails in pcrypt
Drivers:
- Add support for Airoha EN7581 TRNG
- Add support for STM32MP25x platforms in stm32
- Enable iproc-r200 RNG driver on BCMBCA
- Add Broadcom BCM74110 RNG driver"
* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
crypto: aesni - Move back to module_init
crypto: lib/mpi - Export mpi_set_bit
crypto: aes-gcm-p10 - Use the correct bit to test for P10
hwrng: amd - remove reference to removed PPC_MAPLE config
crypto: arm/crct10dif - Implement plain NEON variant
crypto: arm/crct10dif - Macroify PMULL asm code
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
crypto: arm64/crct10dif - Remove obsolete chunking logic
crypto: bcm - add error check in the ahash_hmac_init function
crypto: caam - add error check to caam_rsa_set_priv_key_form
hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
dt-bindings: rng: add binding for BCM74110 RNG
padata: Clean up in padata_do_multithreaded()
crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
...
-----BEGIN PGP SIGNATURE-----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=m/yY
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
"Thirteen patches, all focused on moving away from the current 'secid'
LSM identifier to a richer 'lsm_prop' structure.
This move will help reduce the translation that is necessary in many
LSMs, offering better performance, and make it easier to support
different LSMs in the future"
* tag 'lsm-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: remove lsm_prop scaffolding
netlabel,smack: use lsm_prop for audit data
audit: change context data from secid to lsm_prop
lsm: create new security_cred_getlsmprop LSM hook
audit: use an lsm_prop in audit_names
lsm: use lsm_prop in security_inode_getsecid
lsm: use lsm_prop in security_current_getsecid
audit: update shutdown LSM data
lsm: use lsm_prop in security_ipc_getsecid
audit: maintain an lsm_prop in audit_context
lsm: add lsmprop_to_secctx hook
lsm: use lsm_prop in security_audit_rule_match
lsm: add the lsm_prop data structure
all failure exits prior to fdget() leave the scope, all matching fdput()
are immediately followed by leaving the scope.
[xfs_ioc_commit_range() chunk moved here as well]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Create a new LSM hook security_cred_getlsmprop() which, like
security_cred_getsecid(), fetches LSM specific attributes from the
cred structure. The associated data elements in the audit sub-system
are changed from a secid to a lsm_prop to accommodate multiple possible
LSM audit users.
Cc: linux-integrity@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: selinux@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Change the security_current_getsecid_subj() and
security_task_getsecid_obj() interfaces to fill in a lsm_prop structure
instead of a u32 secid. Audit interfaces will need to collect all
possible security data for possible reporting.
Cc: linux-integrity@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: selinux@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
A sig_alg backend has just been introduced with the intent of moving all
asymmetric sign/verify algorithms to it one by one.
Migrate the sign/verify operations from rsa-pkcs1pad.c to a separate
rsassa-pkcs1.c which uses the new backend.
Consequently there are now two templates which build on the "rsa"
akcipher_alg:
* The existing "pkcs1pad" template, which is instantiated as an
akcipher_instance and retains the encrypt/decrypt operations of
RSAES-PKCS1-v1_5 (RFC 8017 sec 7.2).
* The new "pkcs1" template, which is instantiated as a sig_instance
and contains the sign/verify operations of RSASSA-PKCS1-v1_5
(RFC 8017 sec 8.2).
In a separate step, rsa-pkcs1pad.c could optionally be renamed to
rsaes-pkcs1.c for clarity. Additional "oaep" and "pss" templates
could be added for RSAES-OAEP and RSASSA-PSS.
Note that it's currently allowed to allocate a "pkcs1pad(rsa)" transform
without specifying a hash algorithm. That makes sense if the transform
is only used for encrypt/decrypt and continues to be supported. But for
sign/verify, such transforms previously did not insert the Full Hash
Prefix into the padding. The resulting message encoding was incompliant
with EMSA-PKCS1-v1_5 (RFC 8017 sec 9.2) and therefore nonsensical.
From here on in, it is no longer allowed to allocate a transform without
specifying a hash algorithm if the transform is used for sign/verify
operations. This simplifies the code because the insertion of the Full
Hash Prefix is no longer optional, so various "if (digest_info)" clauses
can be removed.
There has been a previous attempt to forbid transform allocation without
specifying a hash algorithm, namely by commit c0d20d22e0ad ("crypto:
rsa-pkcs1pad - Require hash to be present"). It had to be rolled back
with commit b3a8c8a5ebb5 ("crypto: rsa-pkcs1pad: Allow hash to be
optional [ver #2]"), presumably because it broke allocation of a
transform which was solely used for encrypt/decrypt, not sign/verify.
Avoid such breakage by allowing transform allocation for encrypt/decrypt
with and without specifying a hash algorithm (and simply ignoring the
hash algorithm in the former case).
So again, specifying a hash algorithm is now mandatory for sign/verify,
but optional and ignored for encrypt/decrypt.
The new sig_alg API uses kernel buffers instead of sglists, which
avoids the overhead of copying signature and digest from sglists back
into kernel buffers. rsassa-pkcs1.c is thus simplified quite a bit.
sig_alg is always synchronous, whereas the underlying "rsa" akcipher_alg
may be asynchronous. So await the result of the akcipher_alg, similar
to crypto_akcipher_sync_{en,de}crypt().
As part of the migration, rename "rsa_digest_info" to "hash_prefix" to
adhere to the spec language in RFC 9580. Otherwise keep the code
unmodified wherever possible to ease reviewing and bisecting. Leave
several simplification and hardening opportunities to separate commits.
rsassa-pkcs1.c uses modern __free() syntax for allocation of buffers
which need to be freed by kfree_sensitive(), hence a DEFINE_FREE()
clause for kfree_sensitive() is introduced herein as a byproduct.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ
63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d
592+iDgLsema/H/0/CqfqlaNtDNY8Q0=
=HUl5
-----END PGP SIGNATURE-----
Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The LSM framework has an existing inode_free_security() hook which
is used by LSMs that manage state associated with an inode, but
due to the use of RCU to protect the inode, special care must be
taken to ensure that the LSMs do not fully release the inode state
until it is safe from a RCU perspective.
This patch implements a new inode_free_security_rcu() implementation
hook which is called when it is safe to free the LSM's internal inode
state. Unfortunately, this new hook does not have access to the inode
itself as it may already be released, so the existing
inode_free_security() hook is retained for those LSMs which require
access to the inode.
Cc: stable@vger.kernel.org
Reported-by: syzbot+5446fbf332b0602ede0b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/00000000000076ba3b0617f65cc8@google.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
Force a file's integrity to be re-evaluated on file metadata change by
resetting both the IMA and EVM status flags.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Move all the variables used for file change detection into a structure
that can be used by IMA and EVM. Implement an inline function for storing
the identification of an inode and one for detecting changes to an inode
based on this new structure.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Rename the backing_inode variable to real_inode since it gets its value
from real_inode().
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
There is currently an object (`hdr)` in `struct ima_max_digest_data`
that contains a flexible structure (`struct ima_digest_data`):
struct ima_max_digest_data {
struct ima_digest_data hdr;
u8 digest[HASH_MAX_DIGESTSIZE];
} __packed;
So, in order to avoid ending up with a flexible-array member in the
middle of a struct, we use the `__struct_group()` helper to separate
the flexible array from the rest of the members in the flexible
structure:
struct ima_digest_data {
__struct_group(ima_digest_data_hdr, hdr, __packed,
... the rest of the members
);
u8 digest[];
} __packed;
And similarly for `struct evm_ima_xattr_data`.
With the change described above, we can now declare an object of the
type of the tagged `struct ima_digest_data_hdr`, without embedding the
flexible array in the middle of another struct:
struct ima_max_digest_data {
struct ima_digest_data_hdr hdr;
u8 digest[HASH_MAX_DIGESTSIZE];
} __packed;
And similarly for `struct evm_digest` and `struct evm_xattr`.
We also use `container_of()` whenever we need to retrieve a pointer to
the flexible structure.
So, with these changes, fix the following warnings:
security/integrity/evm/evm.h:64:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/evm/../integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/evm/../integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/ima/../integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/ima/../integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/platform_certs/../integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/platform_certs/../integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The init_module syscall loads an ELF image into kernel space without
measuring the buffer containing the ELF image. To close this kernel
module integrity gap, define a new critical-data record which includes
the hash of the ELF image.
Instead of including the buffer data in the IMA measurement list,
include the hash of the buffer data to avoid large IMA measurement
list records. The buffer data hash would be the same value as the
finit_module syscall file hash.
To enable measuring the init_module buffer and other critical data from
boot, define "ima_policy=critical_data" on the boot command line. Since
builtin policies are not persistent, a custom IMA policy must include
the rule as well: measure func=CRITICAL_DATA label=modules
To verify the template data hash value, first convert the buffer data
hash to binary:
grep "init_module" \
/sys/kernel/security/integrity/ima/ascii_runtime_measurements | \
tail -1 | cut -d' ' -f 6 | xxd -r -p | sha256sum
Reported-by: Ken Goldman <kgold@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Make the 'ima' LSM independent from the 'integrity' LSM by introducing IMA
own integrity metadata (ima_iint_cache structure, with IMA-specific fields
from the integrity_iint_cache structure), and by managing it directly from
the 'ima' LSM.
Create ima_iint.c and introduce the same integrity metadata management
functions found in iint.c (renamed with ima_). However, instead of putting
metadata in an rbtree, reserve space from IMA in the inode security blob
for a pointer, and introduce the ima_inode_set_iint()/ima_inode_get_iint()
primitives to store/retrieve that pointer. This improves search time from
logarithmic to constant.
Consequently, don't include the inode pointer as field in the
ima_iint_cache structure, since the association with the inode is clear.
Since the inode field is missing in ima_iint_cache, pass the extra inode
parameter to ima_get_verity_digest().
Prefer storing the pointer instead of the entire ima_iint_cache structure,
to avoid too much memory pressure. Use the same mechanism as before, a
cache named ima_iint_cache (renamed from iint_cache), to quickly allocate
a new ima_iint_cache structure when requested by the IMA policy.
Create the new ima_iint_cache in ima_iintcache_init(),
called by init_ima_lsm(), during the initialization of the 'ima' LSM. And,
register ima_inode_free_security() to free the ima_iint_cache structure, if
exists.
Replace integrity_iint_cache with ima_iint_cache in various places of the
IMA code. Also, replace integrity_inode_get() and integrity_iint_find(),
respectively with ima_inode_get() and ima_iint_find().
Finally, move the remaining IMA-specific flags
to security/integrity/ima/ima.h, since they are now unnecessary in the
common integrity layer.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
A few additional IMA hooks are needed to reset the cached appraisal
status, causing the file's integrity to be re-evaluated on next access.
Register these IMA-appraisal only functions separately from the rest of IMA
functions, as appraisal is a separate feature not necessarily enabled in
the kernel configuration.
Reuse the same approach as for other IMA functions, move hardcoded calls
from various places in the kernel to the LSM infrastructure. Declare the
functions as static and register them as hook implementations in
init_ima_appraise_lsm(), called by init_ima_lsm().
Also move the inline function ima_inode_remove_acl() from the public ima.h
header to ima_appraise.c.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move hardcoded IMA function calls (not appraisal-specific functions) from
various places in the kernel to the LSM infrastructure, by introducing a
new LSM named 'ima' (at the end of the LSM list and always enabled like
'integrity').
Having IMA before EVM in the Makefile is sufficient to preserve the
relative order of the new 'ima' LSM in respect to the upcoming 'evm' LSM,
and thus the order of IMA and EVM function calls as when they were
hardcoded.
Make moved functions as static (except ima_post_key_create_or_update(),
which is not in ima_main.c), and register them as implementation of the
respective hooks in the new function init_ima_lsm().
Select CONFIG_SECURITY_PATH, to ensure that the path-based LSM hook
path_post_mknod is always available and ima_post_path_mknod() is always
executed to mark files as new, as before the move.
A slight difference is that IMA and EVM functions registered for the
inode_post_setattr, inode_post_removexattr, path_post_mknod,
inode_post_create_tmpfile, inode_post_set_acl and inode_post_remove_acl
won't be executed for private inodes. Since those inodes are supposed to be
fs-internal, they should not be of interest to IMA or EVM. The S_PRIVATE
flag is used for anonymous inodes, hugetlbfs, reiserfs xattrs, XFS scrub
and kernel-internal tmpfs files.
Conditionally register ima_post_key_create_or_update() if
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS is enabled. Also, conditionally register
ima_kernel_module_request() if CONFIG_INTEGRITY_ASYMMETRIC_KEYS is enabled.
Finally, add the LSM_ID_IMA case in lsm_list_modules_test.c.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In preparation for removing the 'integrity' LSM, move
integrity_kernel_module_request() to IMA, and rename it to
ima_kernel_module_request(). Rewrite the function documentation, to explain
better what the problem is.
Compile it conditionally if CONFIG_INTEGRITY_ASYMMETRIC_KEYS is enabled,
and call it from security.c (removed afterwards with the move of IMA to the
LSM infrastructure).
Adding this hook cannot be avoided, since IMA has no control on the flags
passed to crypto_alloc_sig() in public_key_verify_signature(), and thus
cannot pass CRYPTO_NOLOAD, which solved the problem for EVM hashing with
commit e2861fa71641 ("evm: Don't deadlock if a crypto algorithm is
unavailable").
EVM alone does not need to implement this hook, first because there is no
mutex to deadlock, and second because even if it had it, there should be a
recursive call. However, since verification from EVM can be initiated only
by setting inode metadata, deadlock would occur if modprobe would do the
same while loading a kernel module (which is unlikely).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Change ima_post_read_file() definition, by making "void *buf" a
"char *buf", so that it can be registered as implementation of the
post_read_file hook.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Change ima_file_mprotect() definition, so that it can be registered
as implementation of the file_mprotect hook.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Commit 18b44bc5a672 ("ovl: Always reevaluate the file signature for
IMA") forced signature re-evaulation on every file access.
Instead of always re-evaluating the file's integrity, detect a change
to the backing file, by comparing the cached file metadata with the
backing file's metadata. Verifying just the i_version has not changed
is insufficient. In addition save and compare the i_ino and s_dev
as well.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Raul E Rangel <rrangel@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
IMA currently accesses the i_version out of the inode directly when it
does a measurement. This is fine for most simple filesystems, but can be
problematic with more complex setups (e.g. overlayfs).
Make IMA instead call vfs_getattr_nosec to get this info. This allows
the filesystem to determine whether and how to report the i_version, and
should allow IMA to work properly with a broader class of filesystems in
the future.
Reported-and-Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCY/OUGBQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5baCAP0a4N8OiH5Sv9EQ5xAI8jbDwOeE/Aen
izx6RXiBncaY9QEA7WrXUS3y/8zO3dWSL9feviGDuajTn0bJpmWXkCeh8wM=
=pwAo
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity update from Mimi Zohar:
"One doc and one code cleanup, and two bug fixes"
* tag 'integrity-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Introduce MMAP_CHECK_REQPROT hook
ima: Align ima_file_mmap() parameters with mmap_file LSM hook
evm: call dump_security_xattr() in all cases to remove code duplication
ima: fix ima_delete_rules() kernel-doc warning
ima: return IMA digest value only when IMA_COLLECTED flag is set
ima: fix error handling logic when file measurement failed
Commit 98de59bfe4b2f ("take calculation of final prot in
security_mmap_file() into a helper") caused ima_file_mmap() to receive the
protections requested by the application and not those applied by the
kernel.
After restoring the original MMAP_CHECK behavior, existing attestation
servers might be broken due to not being ready to handle new entries
(previously missing) in the IMA measurement list.
Restore the original correct MMAP_CHECK behavior, instead of keeping the
current buggy one and introducing a new hook with the correct behavior.
Otherwise, there would have been the risk of IMA users not noticing the
problem at all, as they would actively have to update the IMA policy, to
switch to the correct behavior.
Also, introduce the new MMAP_CHECK_REQPROT hook to keep the current
behavior, so that IMA users could easily fix a broken attestation server,
although this approach is discouraged due to potentially missing
measurements.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Commit 98de59bfe4b2f ("take calculation of final prot in
security_mmap_file() into a helper") moved the code to update prot, to be
the actual protections applied to the kernel, to a new helper called
mmap_prot().
However, while without the helper ima_file_mmap() was getting the updated
prot, with the helper ima_file_mmap() gets the original prot, which
contains the protections requested by the application.
A possible consequence of this change is that, if an application calls
mmap() with only PROT_READ, and the kernel applies PROT_EXEC in addition,
that application would have access to executable memory without having this
event recorded in the IMA measurement list. This situation would occur for
example if the application, before mmap(), calls the personality() system
call with READ_IMPLIES_EXEC as the first argument.
Align ima_file_mmap() parameters with those of the mmap_file LSM hook, so
that IMA can receive both the requested prot and the final prot. Since the
requested protections are stored in a new variable, and the final
protections are stored in the existing variable, this effectively restores
the original behavior of the MMAP_CHECK hook.
Cc: stable@vger.kernel.org
Fixes: 98de59bfe4b2 ("take calculation of final prot in security_mmap_file() into a helper")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The IMA_COLLECTED flag indicates whether the IMA subsystem has
successfully collected a measurement for a given file object. Ensure
that we return the respective digest value stored within the iint
entry only when this flag has been set.
Failing to check for the presence of this flag exposes consumers of
this IMA API to receive potentially undesired IMA digest values when
an erroneous condition has been experienced in some of the lower level
IMA API code.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Restore the error handling logic so that when file measurement fails,
the respective iint entry is not left with the digest data being
populated with zeroes.
Fixes: 54f03916fb89 ("ima: permit fsverity's file digests in the IMA measurement list")
Cc: stable@vger.kernel.org # 5.19
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCY5ekGxQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5QLyAQC+olx4ImpAgFXoeYaZOiZr08ziAIlb
hQ8rae6hFWecCgD/SZmDtOQ39UGobWbpj+GqwZvx8iJwKPCu9YzQ7Rjo7QE=
=MywK
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Aside from the one cleanup, the other changes are bug fixes:
Cleanup:
- Include missing iMac Pro 2017 in list of Macs with T2 security chip
Bug fixes:
- Improper instantiation of "encrypted" keys with user provided data
- Not handling delay in updating LSM label based IMA policy rules
(-ESTALE)
- IMA and integrity memory leaks on error paths
- CONFIG_IMA_DEFAULT_HASH_SM3 hash algorithm renamed"
* tag 'integrity-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Fix hash dependency to correct algorithm
ima: Fix misuse of dereference of pointer in template_desc_init_fields()
integrity: Fix memory leakage in keyring allocation error path
ima: Fix memory leak in __ima_inode_hash()
ima: Handle -ESTALE returned by ima_filter_rule_match()
ima: Simplify ima_lsm_copy_rule
ima: Fix a potential NULL pointer access in ima_restore_measurement_list
efi: Add iMac Pro 2017 to uefi skip cert quirk
KEYS: encrypted: fix key instantiation with user-provided data
The vfs_getxattr_alloc() function currently returns a ssize_t value
despite the fact that it only uses int values internally for return
values. Fix this by converting vfs_getxattr_alloc() to return an
int type and adjust the callers as necessary. As part of these
caller modifications, some of the callers are fixed to properly free
the xattr value buffer on both success and failure to ensure that
memory is not leaked in the failure case.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Commit f3cc6b25dcc5 ("ima: always measure and audit files in policy") lets
measurement or audit happen even if the file digest cannot be calculated.
As a result, iint->ima_hash could have been allocated despite
ima_collect_measurement() returning an error.
Since ima_hash belongs to a temporary inode metadata structure, declared
at the beginning of __ima_inode_hash(), just add a kfree() call if
ima_collect_measurement() returns an error different from -ENOMEM (in that
case, ima_hash should not have been allocated).
Cc: stable@vger.kernel.org
Fixes: 280fe8367b0d ("ima: Always return a file measurement in ima_file_hash()")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Permit fsverity's file digest (a hash of struct fsverity_descriptor) to
be included in the IMA measurement list, based on the new measurement
policy rule 'digest_type=verity' option.
To differentiate between a regular IMA file hash from an fsverity's
file digest, use the new d-ngv2 format field included in the ima-ngv2
template.
The following policy rule requires fsverity file digests and specifies
the new 'ima-ngv2' template, which contains the new 'd-ngv2' field. The
policy rule may be constrained, for example based on a fsuuid or LSM
label.
measure func=FILE_CHECK digest_type=verity template=ima-ngv2
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The pointer 'file' is being initialized with a value that is never read,
it is being re-assigned the same value later on closer to where it is
being first used. The initialization is redundant and can be removed.
Cleans up clang scan build warning:
security/integrity/ima/ima_main.c:434:15: warning: Value stored to 'file'
during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmI7YBcACgkQMUZtbf5S
IrveSBAAmSNJlUK6vPsnNzs7IhsZnfI/AUjm2TCLZnlhKttbpI4A/4Pohk33V7RS
FGX7f8kjEfhUwrIiLDgeCnztNHRECrCmk6aZc/jLEvecmTauJ+f6kjShkDY/wix+
AkPHmrZnQeLPAEVuljDdV+sL6ik08+zQL7PazIYHsaSKKC0MGQptRwcri8PLRAKE
KPBAhVhleq2rAZ/ntprSN52F4Af6rpFTrPIWuN8Bqdbc9dy5094LT0mpOOWYvgr3
/DLvvAPuLemwyIQkjWknVKBRUAQcmNPC+BY3J8K3LRaiNhekGqOFan46BfqP+k2J
6DWu0Qrp2yWt4BMOeEToZR5rA6v5suUAMIBu8PRZIDkINXQMlIxHfGjZyNm0rVfw
7edNri966yus9OdzwPa32MIG3oC6PnVAwYCJAjjBMNS8sSIkp7wgHLkgWN4UFe2H
K/e6z8TLF4UQ+zFM0aGI5WZ+9QqWkTWEDF3R3OhdFpGrznna0gxmkOeV2YvtsgxY
cbS0vV9Zj73o+bYzgBKJsw/dAjyLdXoHUGvus26VLQ78S/VGunVKtItwoxBAYmZo
krW964qcC89YofzSi8RSKLHuEWtNWZbVm8YXr75u6jpr5GhMBu0CYefLs+BuZcxy
dw8c69cGneVbGZmY2J3rBhDkchbuICl8vdUPatGrOJAoaFdYKuw=
=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
__ima_inode_hash() checks if a digest has been already calculated by
looking for the integrity_iint_cache structure associated to the passed
inode.
Users of ima_file_hash() (e.g. eBPF) might be interested in obtaining the
information without having to setup an IMA policy so that the digest is
always available at the time they call this function.
In addition, they likely expect the digest to be fresh, e.g. recalculated
by IMA after a file write. Although getting the digest from the
bprm_committed_creds hook (as in the eBPF test) ensures that the digest is
fresh, as the IMA hook is executed before that hook, this is not always the
case (e.g. for the mmap_file hook).
Call ima_collect_measurement() in __ima_inode_hash(), if the file
descriptor is available (passed by ima_file_hash()) and the digest is not
available/not fresh, and store the file measurement in a temporary
integrity_iint_cache structure.
This change does not cause memory usage increase, due to using the
temporary integrity_iint_cache structure, and due to freeing the
ima_digest_data structure inside integrity_iint_cache before exiting from
__ima_inode_hash().
For compatibility reasons, the behavior of ima_inode_hash() remains
unchanged.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220302111404.193900-3-roberto.sassu@huawei.com
Fix the following warnings in ima_main.c, displayed with W=n make argument:
security/integrity/ima/ima_main.c:432: warning: Function parameter or
member 'vma' not described in 'ima_file_mprotect'
security/integrity/ima/ima_main.c:636: warning: Function parameter or
member 'inode' not described in 'ima_post_create_tmpfile'
security/integrity/ima/ima_main.c:636: warning: Excess function parameter
'file' description in 'ima_post_create_tmpfile'
security/integrity/ima/ima_main.c:843: warning: Function parameter or
member 'load_id' not described in 'ima_post_load_data'
security/integrity/ima/ima_main.c:843: warning: Excess function parameter
'id' description in 'ima_post_load_data'
Also, fix some style issues in the description of ima_post_create_tmpfile()
and ima_post_path_mknod().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220302111404.193900-2-roberto.sassu@huawei.com
To support larger hash digests in the 'iint' cache, instead of defining
the 'digest' field as the maximum digest size, the 'digest' field was
defined as a flexible array variable. The "ima_digest_data" struct was
wrapped inside a local structure with the maximum digest size. But
before adding the record to the iint cache, memory for the exact digest
size was dynamically allocated.
The original reason for defining the 'digest' field as a flexible array
variable is still valid for the 'iint' cache use case. Instead of
wrapping the 'ima_digest_data' struct in a local structure define
'ima_max_digest_data' struct.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Simple policy rule options, such as fowner, uid, or euid, can be checked
immediately, while other policy rule options, such as requiring a file
signature, need to be deferred.
The 'flags' field in the integrity_iint_cache struct contains the policy
action', 'subaction', and non action/subaction.
action: measure/measured, appraise/appraised, (collect)/collected,
audit/audited
subaction: appraise status for each hook (e.g. file, mmap, bprm, read,
creds)
non action/subaction: deferred policy rule options and state
Rename the IMA_ACTION_FLAGS to IMA_NONACTION_FLAGS.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
There are a few minor typos in the comments. Fix these.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The security_task_getsecid_subj() LSM hook invites misuse by allowing
callers to specify a task even though the hook is only safe when the
current task is referenced. Fix this by removing the task_struct
argument to the hook, requiring LSM implementations to use the
current task. While we are changing the hook declaration we also
rename the function to security_current_getsecid_subj() in an effort
to reinforce that the hook captures the subjective credentials of the
current task and not an arbitrary task on the system.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYS4c6hQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5b4OAP9l7cnpkOzVUtjoNIIYdIiKTDp+Kb8v
3o08lxtyzALfKgEAlrizzLfphqLa2yCdxbyaTjkx19J7tav27xVti8uVGgs=
=hIxY
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
- Limit the allowed hash algorithms when writing security.ima xattrs or
verifying them, based on the IMA policy and the configured hash
algorithms.
- Return the calculated "critical data" measurement hash and size to
avoid code duplication. (Preparatory change for a proposed LSM.)
- and a single patch to address a compiler warning.
* tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
IMA: reject unknown hash algorithms in ima_get_hash_algo
IMA: prevent SETXATTR_CHECK policy rules with unavailable algorithms
IMA: introduce a new policy option func=SETXATTR_CHECK
IMA: add a policy option to restrict xattr hash algorithms on appraisal
IMA: add support to restrict the hash algorithms used for file appraisal
IMA: block writes of the security.ima xattr with unsupported algorithms
IMA: remove the dependency on CRYPTO_MD5
ima: Add digest and digest_len params to the functions to measure a buffer
ima: Return int in the functions to measure a buffer
ima: Introduce ima_get_current_hash_algo()
IMA: remove -Wmissing-prototypes warning
While users can restrict the accepted hash algorithms for the
security.ima xattr file signature when appraising said file, users
cannot restrict the algorithms that can be set on that attribute:
any algorithm built in the kernel is accepted on a write.
Define a new value for the ima policy option 'func' that restricts
globally the hash algorithms accepted when writing the security.ima
xattr.
When a policy contains a rule of the form
appraise func=SETXATTR_CHECK appraise_algos=sha256,sha384,sha512
only values corresponding to one of these three digest algorithms
will be accepted for writing the security.ima xattr. Attempting to
write the attribute using another algorithm (or "free-form" data)
will be denied with an audit log message. In the absence of such a
policy rule, the default is still to only accept hash algorithms
built in the kernel (with all the limitations that entails).
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The kernel accepts any hash algorithm as a value for the security.ima
xattr. Users may wish to restrict the accepted algorithms to only
support strong cryptographic ones.
Provide the plumbing to restrict the permitted set of hash algorithms
used for verifying file hashes and signatures stored in security.ima
xattr.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This patch performs the final modification necessary to pass the buffer
measurement to callers, so that they provide a functionality similar to
ima_file_hash(). It adds the 'digest' and 'digest_len' parameters to
ima_measure_critical_data() and process_buffer_measurement().
These functions calculate the digest even if there is no suitable rule in
the IMA policy and, in this case, they simply return 1 before generating a
new measurement entry.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
