mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2025-04-09 14:45:27 +00:00
Code Issues Packages Projects Releases Wiki Activity
linux/arch/arm/include/asm/assembler.h
Linus Walleij 7af5b901e8 ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement 
With LPAE enabled, privileged no-access cannot be enforced using CPU
domains as such feature is not available. This patch implements PAN
by disabling TTBR0 page table walks while in kernel mode.

The ARM architecture allows page table walks to be split between TTBR0
and TTBR1. With LPAE enabled, the split is defined by a combination of
TTBCR T0SZ and T1SZ bits. Currently, an LPAE-enabled kernel uses TTBR0
for user addresses and TTBR1 for kernel addresses with the VMSPLIT_2G
and VMSPLIT_3G configurations. The main advantage for the 3:1 split is
that TTBR1 is reduced to 2 levels, so potentially faster TLB refill
(though usually the first level entries are already cached in the TLB).

The PAN support on LPAE-enabled kernels uses TTBR0 when running in user
space or in kernel space during user access routines (TTBCR T0SZ and
T1SZ are both 0). When running user accesses are disabled in kernel
mode, TTBR0 page table walks are disabled by setting TTBCR.EPD0. TTBR1
is used for kernel accesses (including loadable modules; anything
covered by swapper_pg_dir) by reducing the TTBCR.T0SZ to the minimum
(2^(32-7) = 32MB). To avoid user accesses potentially hitting stale TLB
entries, the ASID is switched to 0 (reserved) by setting TTBCR.A1 and
using the ASID value in TTBR1. The difference from a non-PAN kernel is
that with the 3:1 memory split, TTBR1 always uses 3 levels of page
tables.

As part of the change we are using preprocessor elif definied() clauses
so balance these clauses by converting relevant precedingt ifdef
clauses to if defined() clauses.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2024-04-18 12:10:46 +01:00

796 lines
17 KiB
C
Raw Permalink Blame History

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/include/asm/assembler.h
*
* Copyright (C) 1996-2000 Russell King
*
* This file contains arm architecture specific defines
* for the different processors.
*
* Do not include any C declarations in this file - it is included by
* assembler source.
*/
#ifndef __ASM_ASSEMBLER_H__
#define __ASM_ASSEMBLER_H__
#ifndef __ASSEMBLY__
#error "Only include this from assembly code"
#endif
#include <asm/ptrace.h>
#include <asm/opcodes-virt.h>
#include <asm/asm-offsets.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/thread_info.h>
#include <asm/uaccess-asm.h>
#define IOMEM(x) (x)
/*
* Endian independent macros for shifting bytes within registers.
*/
#ifndef __ARMEB__
#define lspull lsr
#define lspush lsl
#define get_byte_0 lsl #0
#define get_byte_1 lsr #8
#define get_byte_2 lsr #16
#define get_byte_3 lsr #24
#define put_byte_0 lsl #0
#define put_byte_1 lsl #8
#define put_byte_2 lsl #16
#define put_byte_3 lsl #24
#else
#define lspull lsl
#define lspush lsr
#define get_byte_0 lsr #24
#define get_byte_1 lsr #16
#define get_byte_2 lsr #8
#define get_byte_3 lsl #0
#define put_byte_0 lsl #24
#define put_byte_1 lsl #16
#define put_byte_2 lsl #8
#define put_byte_3 lsl #0
#endif
/* Select code for any configuration running in BE8 mode */
#ifdef CONFIG_CPU_ENDIAN_BE8
#define ARM_BE8(code...) code
#else
#define ARM_BE8(code...)
#endif
/*
* Data preload for architectures that support it
*/
#if __LINUX_ARM_ARCH__ >= 5
#define PLD(code...) code
#else
#define PLD(code...)
#endif
/*
* This can be used to enable code to cacheline align the destination
* pointer when bulk writing to memory. Experiments on StrongARM and
* XScale didn't show this a worthwhile thing to do when the cache is not
* set to write-allocate (this would need further testing on XScale when WA
* is used).
*
* On Feroceon there is much to gain however, regardless of cache mode.
*/
#ifdef CONFIG_CPU_FEROCEON
#define CALGN(code...) code
#else
#define CALGN(code...)
#endif
#define IMM12_MASK 0xfff
/* the frame pointer used for stack unwinding */
ARM( fpreg .req r11 )
THUMB( fpreg .req r7 )
/*
* Enable and disable interrupts
*/
#if __LINUX_ARM_ARCH__ >= 6
.macro disable_irq_notrace
cpsid i
.endm
.macro enable_irq_notrace
cpsie i
.endm
#else
.macro disable_irq_notrace
msr cpsr_c, #PSR_I_BIT | SVC_MODE
.endm
.macro enable_irq_notrace
msr cpsr_c, #SVC_MODE
.endm
#endif
#if __LINUX_ARM_ARCH__ < 7
.macro dsb, args
mcr p15, 0, r0, c7, c10, 4
.endm
.macro isb, args
mcr p15, 0, r0, c7, c5, 4
.endm
#endif
.macro asm_trace_hardirqs_off, save=1
#if defined(CONFIG_TRACE_IRQFLAGS)
.if \save
stmdb sp!, {r0-r3, ip, lr}
.endif
bl trace_hardirqs_off
.if \save
ldmia sp!, {r0-r3, ip, lr}
.endif
#endif
.endm
.macro asm_trace_hardirqs_on, cond=al, save=1
#if defined(CONFIG_TRACE_IRQFLAGS)
/*
* actually the registers should be pushed and pop'd conditionally, but
* after bl the flags are certainly clobbered
*/
.if \save
stmdb sp!, {r0-r3, ip, lr}
.endif
bl\cond trace_hardirqs_on
.if \save
ldmia sp!, {r0-r3, ip, lr}
.endif
#endif
.endm
.macro disable_irq, save=1
disable_irq_notrace
asm_trace_hardirqs_off \save
.endm
.macro enable_irq
asm_trace_hardirqs_on
enable_irq_notrace
.endm
/*
* Save the current IRQ state and disable IRQs. Note that this macro
* assumes FIQs are enabled, and that the processor is in SVC mode.
*/
.macro save_and_disable_irqs, oldcpsr
#ifdef CONFIG_CPU_V7M
mrs \oldcpsr, primask
#else
mrs \oldcpsr, cpsr
#endif
disable_irq
.endm
.macro save_and_disable_irqs_notrace, oldcpsr
#ifdef CONFIG_CPU_V7M
mrs \oldcpsr, primask
#else
mrs \oldcpsr, cpsr
#endif
disable_irq_notrace
.endm
/*
* Restore interrupt state previously stored in a register. We don't
* guarantee that this will preserve the flags.
*/
.macro restore_irqs_notrace, oldcpsr
#ifdef CONFIG_CPU_V7M
msr primask, \oldcpsr
#else
msr cpsr_c, \oldcpsr
#endif
.endm
.macro restore_irqs, oldcpsr
tst \oldcpsr, #PSR_I_BIT
asm_trace_hardirqs_on cond=eq
restore_irqs_notrace \oldcpsr
.endm
/*
* Assembly version of "adr rd, BSYM(sym)". This should only be used to
* reference local symbols in the same assembly file which are to be
* resolved by the assembler. Other usage is undefined.
*/
.irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
.macro badr\c, rd, sym
#ifdef CONFIG_THUMB2_KERNEL
adr\c \rd, \sym + 1
#else
adr\c \rd, \sym
#endif
.endm
.endr
/*
* Get current thread_info.
*/
.macro get_thread_info, rd
/* thread_info is the first member of struct task_struct */
get_current \rd
.endm
/*
* Increment/decrement the preempt count.
*/
#ifdef CONFIG_PREEMPT_COUNT
.macro inc_preempt_count, ti, tmp
ldr \tmp, [\ti, #TI_PREEMPT] @ get preempt count
add \tmp, \tmp, #1 @ increment it
str \tmp, [\ti, #TI_PREEMPT]
.endm
.macro dec_preempt_count, ti, tmp
ldr \tmp, [\ti, #TI_PREEMPT] @ get preempt count
sub \tmp, \tmp, #1 @ decrement it
str \tmp, [\ti, #TI_PREEMPT]
.endm
#else
.macro inc_preempt_count, ti, tmp
.endm
.macro dec_preempt_count, ti, tmp
.endm
#endif
#define USERL(l, x...) \
9999: x; \
.pushsection __ex_table,"a"; \
.align 3; \
.long 9999b,l; \
.popsection
#define USER(x...) USERL(9001f, x)
#ifdef CONFIG_SMP
#define ALT_SMP(instr...) \
9998: instr
/*
* Note: if you get assembler errors from ALT_UP() when building with
* CONFIG_THUMB2_KERNEL, you almost certainly need to use
* ALT_SMP( W(instr) ... )
*/
#define ALT_UP(instr...) \
.pushsection ".alt.smp.init", "a" ;\
.align 2 ;\
.long 9998b - . ;\
9997: instr ;\
.if . - 9997b == 2 ;\
nop ;\
.endif ;\
.if . - 9997b != 4 ;\
.error "ALT_UP() content must assemble to exactly 4 bytes";\
.endif ;\
.popsection
#define ALT_UP_B(label) \
.pushsection ".alt.smp.init", "a" ;\
.align 2 ;\
.long 9998b - . ;\
W(b) . + (label - 9998b) ;\
.popsection
#else
#define ALT_SMP(instr...)
#define ALT_UP(instr...) instr
#define ALT_UP_B(label) b label
#endif
/*
* this_cpu_offset - load the per-CPU offset of this CPU into
* register 'rd'
*/
.macro this_cpu_offset, rd:req
#ifdef CONFIG_SMP
ALT_SMP(mrc p15, 0, \rd, c13, c0, 4)
#ifdef CONFIG_CPU_V6
ALT_UP_B(.L1_\@)
.L0_\@:
.subsection 1
.L1_\@: ldr_va \rd, __per_cpu_offset
b .L0_\@
.previous
#endif
#else
mov \rd, #0
#endif
.endm
/*
* set_current - store the task pointer of this CPU's current task
*/
.macro set_current, rn:req, tmp:req
#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
9998: mcr p15, 0, \rn, c13, c0, 3 @ set TPIDRURO register
#ifdef CONFIG_CPU_V6
ALT_UP_B(.L0_\@)
.subsection 1
.L0_\@: str_va \rn, __current, \tmp
b .L1_\@
.previous
.L1_\@:
#endif
#else
str_va \rn, __current, \tmp
#endif
.endm
/*
* get_current - load the task pointer of this CPU's current task
*/
.macro get_current, rd:req
#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
9998: mrc p15, 0, \rd, c13, c0, 3 @ get TPIDRURO register
#ifdef CONFIG_CPU_V6
ALT_UP_B(.L0_\@)
.subsection 1
.L0_\@: ldr_va \rd, __current
b .L1_\@
.previous
.L1_\@:
#endif
#else
ldr_va \rd, __current
#endif
.endm
/*
* reload_current - reload the task pointer of this CPU's current task
* into the TLS register
*/
.macro reload_current, t1:req, t2:req
#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
#ifdef CONFIG_CPU_V6
ALT_SMP(nop)
ALT_UP_B(.L0_\@)
#endif
ldr_this_cpu \t1, __entry_task, \t1, \t2
mcr p15, 0, \t1, c13, c0, 3 @ store in TPIDRURO
.L0_\@:
#endif
.endm
/*
* Instruction barrier
*/
.macro instr_sync
#if __LINUX_ARM_ARCH__ >= 7
isb
#elif __LINUX_ARM_ARCH__ == 6
mcr p15, 0, r0, c7, c5, 4
#endif
.endm
/*
* SMP data memory barrier
*/
.macro smp_dmb mode
#ifdef CONFIG_SMP
#if __LINUX_ARM_ARCH__ >= 7
.ifeqs "\mode","arm"
ALT_SMP(dmb ish)
.else
ALT_SMP(W(dmb) ish)
.endif
#elif __LINUX_ARM_ARCH__ == 6
ALT_SMP(mcr p15, 0, r0, c7, c10, 5) @ dmb
#else
#error Incompatible SMP platform
#endif
.ifeqs "\mode","arm"
ALT_UP(nop)
.else
ALT_UP(W(nop))
.endif
#endif
.endm
/*
* Raw SMP data memory barrier
*/
.macro __smp_dmb mode
#if __LINUX_ARM_ARCH__ >= 7
.ifeqs "\mode","arm"
dmb ish
.else
W(dmb) ish
.endif
#elif __LINUX_ARM_ARCH__ == 6
mcr p15, 0, r0, c7, c10, 5 @ dmb
#else
.error "Incompatible SMP platform"
#endif
.endm
#if defined(CONFIG_CPU_V7M)
/*
* setmode is used to assert to be in svc mode during boot. For v7-M
* this is done in __v7m_setup, so setmode can be empty here.
*/
.macro setmode, mode, reg
.endm
#elif defined(CONFIG_THUMB2_KERNEL)
.macro setmode, mode, reg
mov \reg, #\mode
msr cpsr_c, \reg
.endm
#else
.macro setmode, mode, reg
msr cpsr_c, #\mode
.endm
#endif
/*
* Helper macro to enter SVC mode cleanly and mask interrupts. reg is
* a scratch register for the macro to overwrite.
*
* This macro is intended for forcing the CPU into SVC mode at boot time.
* you cannot return to the original mode.
*/
.macro safe_svcmode_maskall reg:req
#if __LINUX_ARM_ARCH__ >= 6 && !defined(CONFIG_CPU_V7M)
mrs \reg , cpsr
eor \reg, \reg, #HYP_MODE
tst \reg, #MODE_MASK
bic \reg , \reg , #MODE_MASK
orr \reg , \reg , #PSR_I_BIT | PSR_F_BIT | SVC_MODE
THUMB( orr \reg , \reg , #PSR_T_BIT )
bne 1f
orr \reg, \reg, #PSR_A_BIT
badr lr, 2f
msr spsr_cxsf, \reg
__MSR_ELR_HYP(14)
__ERET
1: msr cpsr_c, \reg
2:
#else
/*
* workaround for possibly broken pre-v6 hardware
* (akita, Sharp Zaurus C-1000, PXA270-based)
*/
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, \reg
#endif
.endm
/*
* STRT/LDRT access macros with ARM and Thumb-2 variants
*/
#ifdef CONFIG_THUMB2_KERNEL
.macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER()
9999:
.if \inc == 1
\instr\()b\t\cond\().w \reg, [\ptr, #\off]
.elseif \inc == 4
\instr\t\cond\().w \reg, [\ptr, #\off]
.else
.error "Unsupported inc macro argument"
.endif
.pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
.popsection
.endm
.macro usracc, instr, reg, ptr, inc, cond, rept, abort
@ explicit IT instruction needed because of the label
@ introduced by the USER macro
.ifnc \cond,al
.if \rept == 1
itt \cond
.elseif \rept == 2
ittt \cond
.else
.error "Unsupported rept macro argument"
.endif
.endif
@ Slightly optimised to avoid incrementing the pointer twice
usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
.if \rept == 2
usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
.endif
add\cond \ptr, #\rept * \inc
.endm
#else /* !CONFIG_THUMB2_KERNEL */
.macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER()
.rept \rept
9999:
.if \inc == 1
\instr\()b\t\cond \reg, [\ptr], #\inc
.elseif \inc == 4
\instr\t\cond \reg, [\ptr], #\inc
.else
.error "Unsupported inc macro argument"
.endif
.pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
.popsection
.endr
.endm
#endif /* CONFIG_THUMB2_KERNEL */
.macro strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
usracc str, \reg, \ptr, \inc, \cond, \rept, \abort
.endm
.macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort
.endm
/* Utility macro for declaring string literals */
.macro string name:req, string
.type \name , #object
\name:
.asciz "\string"
.size \name , . - \name
.endm
.irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
.macro ret\c, reg
#if __LINUX_ARM_ARCH__ < 6
mov\c pc, \reg
#else
.ifeqs "\reg", "lr"
bx\c \reg
.else
mov\c pc, \reg
.endif
#endif
.endm
.endr
.macro ret.w, reg
ret \reg
#ifdef CONFIG_THUMB2_KERNEL
nop
#endif
.endm
.macro bug, msg, line
#ifdef CONFIG_THUMB2_KERNEL
1: .inst 0xde02
#else
1: .inst 0xe7f001f2
#endif
#ifdef CONFIG_DEBUG_BUGVERBOSE
.pushsection .rodata.str, "aMS", %progbits, 1
2: .asciz "\msg"
.popsection
.pushsection __bug_table, "aw"
.align 2
.word 1b, 2b
.hword \line
.popsection
#endif
.endm
#ifdef CONFIG_KPROBES
#define _ASM_NOKPROBE(entry) \
.pushsection "_kprobe_blacklist", "aw" ; \
.balign 4 ; \
.long entry; \
.popsection
#else
#define _ASM_NOKPROBE(entry)
#endif
.macro __adldst_l, op, reg, sym, tmp, c
.if __LINUX_ARM_ARCH__ < 7
ldr\c \tmp, .La\@
.subsection 1
.align 2
.La\@: .long \sym - .Lpc\@
.previous
.else
.ifnb \c
THUMB( ittt \c )
.endif
movw\c \tmp, #:lower16:\sym - .Lpc\@
movt\c \tmp, #:upper16:\sym - .Lpc\@
.endif
#ifndef CONFIG_THUMB2_KERNEL
.set .Lpc\@, . + 8 // PC bias
.ifc \op, add
add\c \reg, \tmp, pc
.else
\op\c \reg, [pc, \tmp]
.endif
#else
.Lb\@: add\c \tmp, \tmp, pc
/*
* In Thumb-2 builds, the PC bias depends on whether we are currently
* emitting into a .arm or a .thumb section. The size of the add opcode
* above will be 2 bytes when emitting in Thumb mode and 4 bytes when
* emitting in ARM mode, so let's use this to account for the bias.
*/
.set .Lpc\@, . + (. - .Lb\@)
.ifnc \op, add
\op\c \reg, [\tmp]
.endif
#endif
.endm
/*
* mov_l - move a constant value or [relocated] address into a register
*/
.macro mov_l, dst:req, imm:req, cond
.if __LINUX_ARM_ARCH__ < 7
ldr\cond \dst, =\imm
.else
movw\cond \dst, #:lower16:\imm
movt\cond \dst, #:upper16:\imm
.endif
.endm
/*
* adr_l - adr pseudo-op with unlimited range
*
* @dst: destination register
* @sym: name of the symbol
* @cond: conditional opcode suffix
*/
.macro adr_l, dst:req, sym:req, cond
__adldst_l add, \dst, \sym, \dst, \cond
.endm
/*
* ldr_l - ldr <literal> pseudo-op with unlimited range
*
* @dst: destination register
* @sym: name of the symbol
* @cond: conditional opcode suffix
*/
.macro ldr_l, dst:req, sym:req, cond
__adldst_l ldr, \dst, \sym, \dst, \cond
.endm
/*
* str_l - str <literal> pseudo-op with unlimited range
*
* @src: source register
* @sym: name of the symbol
* @tmp: mandatory scratch register
* @cond: conditional opcode suffix
*/
.macro str_l, src:req, sym:req, tmp:req, cond
__adldst_l str, \src, \sym, \tmp, \cond
.endm
.macro __ldst_va, op, reg, tmp, sym, cond, offset
#if __LINUX_ARM_ARCH__ >= 7 || \
!defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \
(defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
mov_l \tmp, \sym, \cond
#else
/*
* Avoid a literal load, by emitting a sequence of ADD/LDR instructions
* with the appropriate relocations. The combined sequence has a range
* of -/+ 256 MiB, which should be sufficient for the core kernel and
* for modules loaded into the module region.
*/
.globl \sym
.reloc .L0_\@, R_ARM_ALU_PC_G0_NC, \sym
.reloc .L1_\@, R_ARM_ALU_PC_G1_NC, \sym
.reloc .L2_\@, R_ARM_LDR_PC_G2, \sym
.L0_\@: sub\cond \tmp, pc, #8 - \offset
.L1_\@: sub\cond \tmp, \tmp, #4 - \offset
.L2_\@:
#endif
\op\cond \reg, [\tmp, #\offset]
.endm
/*
* ldr_va - load a 32-bit word from the virtual address of \sym
*/
.macro ldr_va, rd:req, sym:req, cond, tmp, offset=0
.ifnb \tmp
__ldst_va ldr, \rd, \tmp, \sym, \cond, \offset
.else
__ldst_va ldr, \rd, \rd, \sym, \cond, \offset
.endif
.endm
/*
* str_va - store a 32-bit word to the virtual address of \sym
*/
.macro str_va, rn:req, sym:req, tmp:req, cond
__ldst_va str, \rn, \tmp, \sym, \cond, 0
.endm
/*
* ldr_this_cpu_armv6 - Load a 32-bit word from the per-CPU variable 'sym',
* without using a temp register. Supported in ARM mode
* only.
*/
.macro ldr_this_cpu_armv6, rd:req, sym:req
this_cpu_offset \rd
.globl \sym
.reloc .L0_\@, R_ARM_ALU_PC_G0_NC, \sym
.reloc .L1_\@, R_ARM_ALU_PC_G1_NC, \sym
.reloc .L2_\@, R_ARM_LDR_PC_G2, \sym
add \rd, \rd, pc
.L0_\@: sub \rd, \rd, #4
.L1_\@: sub \rd, \rd, #0
.L2_\@: ldr \rd, [\rd, #4]
.endm
/*
* ldr_this_cpu - Load a 32-bit word from the per-CPU variable 'sym'
* into register 'rd', which may be the stack pointer,
* using 't1' and 't2' as general temp registers. These
* are permitted to overlap with 'rd' if != sp
*/
.macro ldr_this_cpu, rd:req, sym:req, t1:req, t2:req
#ifndef CONFIG_SMP
ldr_va \rd, \sym, tmp=\t1
#elif __LINUX_ARM_ARCH__ >= 7 || \
!defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \
(defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
this_cpu_offset \t1
mov_l \t2, \sym
ldr \rd, [\t1, \t2]
#else
ldr_this_cpu_armv6 \rd, \sym
#endif
.endm
/*
* rev_l - byte-swap a 32-bit value
*
* @val: source/destination register
* @tmp: scratch register
*/
.macro rev_l, val:req, tmp:req
.if __LINUX_ARM_ARCH__ < 6
eor \tmp, \val, \val, ror #16
bic \tmp, \tmp, #0x00ff0000
mov \val, \val, ror #8
eor \val, \val, \tmp, lsr #8
.else
rev \val, \val
.endif
.endm
.if __LINUX_ARM_ARCH__ < 6
.set .Lrev_l_uses_tmp, 1
.else
.set .Lrev_l_uses_tmp, 0
.endif
/*
* bl_r - branch and link to register
*
* @dst: target to branch to
* @c: conditional opcode suffix
*/
.macro bl_r, dst:req, c
.if __LINUX_ARM_ARCH__ < 6
mov\c lr, pc
mov\c pc, \dst
.else
blx\c \dst
.endif
.endm
#endif /* __ASM_ASSEMBLER_H__ */
Reference in New Issue View Git Blame Copy Permalink