mirror of
https://github.com/torvalds/linux.git
synced 2025-04-12 16:47:42 +00:00
8868485d6b
- Use dev_err_probe() helpers to simplify the init code in the Qoriq
thermal driver (Frank Li).
- Power down the Qoriq's TMU at suspend time (Alice Guo).
- Add ipq5332, ipq5424 compatible to the QCom's tsens thermal driver
and TSENS enable / calibration support for V2 (Praveenkumar I).
- Add missing rk3328 mapping entry (Trevor Woerner).
- Remove duplicate struct declaration from the thermal core header
file (Xueqin Luo).
- Disable the monitoring mode during suspend in the LVTS Mediatek
driver to prevent temperature acquisition glitches (Nícolas F. R. A.
Prado).
- Disable Stage 3 thermal threshold in the LVTS Mediatek driver
because it disables the suspend ability and does not have an
interrupt handler (Nícolas F. R. A. Prado).
- Fix low temperature offset interrupt in the LVTS Mediatek driver
to prevent multiple interrupts from triggering when the system is at
its normal functionning temperature (Nícolas F. R. A. Prado).
- Enable interrupts in the LVTS Mediatek driver only on sensors that
are in use (Nícolas F. R. A. Prado).
- Add the BCM74110 compatible DT binding and the corresponding code
to support a chip based on a different process node than previous
chips (Florian Fainelli).
- Correct indentation and style in DTS example (Krzysztof Kozlowski).
- Unify hexadecimal annotatation in the rcar_gen3 driver (Niklas
Söderlund).
- Factor out the code logic to read fuses on Gen3 and Gen4 in the
rcar_gen3 thermal driver (Niklas Söderlund).
- Drop unused driver data from the QCom's spmi temperature alarm
driver (Johan Hovold).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmfq7sQSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO15hAH/imWw7djjvVup1ZDxTHICUHbAjS+QwmT
EZr5zy6SSHlnQ/h5eWwCziXBEYY04Ra3qXn/H8cqVKcgeSVdYJQ49adKTK7V0/5O
eszOGQQDtog0xeIYavLDcXFmN3jVa7BF6Zq6XQrezw6HELyWH14EYVVZ4qvgqFvt
jXiMdMzkzfQ/TYkso69lMK+asX0M9V/aRtf4Fzw4WH5qTmkqNkoSLOY7yPidwrYy
t4zXhTWpDmzB0mRaljaZ+Z9rDbyTMe8cRL+K9+PLGLVhPhU2DpVTvAEGs5w4IaoB
Nja+QixI8lOi/m1ErqqeduMtT4Rk4FC6T4uC58tMzLYLYY96snEg/EY=
=5IMD
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These are mostly assorted updates of thermal drivers used on ARM
platforms:
- Use dev_err_probe() helpers to simplify the init code in the Qoriq
thermal driver (Frank Li)
- Power down the Qoriq's TMU at suspend time (Alice Guo)
- Add ipq5332, ipq5424 compatible to the QCom's tsens thermal driver
and TSENS enable / calibration support for V2 (Praveenkumar I)
- Add missing rk3328 mapping entry (Trevor Woerner)
- Remove duplicate struct declaration from the thermal core header
file (Xueqin Luo)
- Disable the monitoring mode during suspend in the LVTS Mediatek
driver to prevent temperature acquisition glitches (Nícolas F. R.
A. Prado)
- Disable Stage 3 thermal threshold in the LVTS Mediatek driver
because it disables the suspend ability and does not have an
interrupt handler (Nícolas F. R. A. Prado)
- Fix low temperature offset interrupt in the LVTS Mediatek driver to
prevent multiple interrupts from triggering when the system is at
its normal functionning temperature (Nícolas F. R. A. Prado)
- Enable interrupts in the LVTS Mediatek driver only on sensors that
are in use (Nícolas F. R. A. Prado)
- Add the BCM74110 compatible DT binding and the corresponding code
to support a chip based on a different process node than previous
chips (Florian Fainelli)
- Correct indentation and style in DTS example (Krzysztof Kozlowski)
- Unify hexadecimal annotatation in the rcar_gen3 driver (Niklas
Söderlund)
- Factor out the code logic to read fuses on Gen3 and Gen4 in the
rcar_gen3 thermal driver (Niklas Söderlund)
- Drop unused driver data from the QCom's spmi temperature alarm
driver (Johan Hovold)"
* tag 'thermal-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/qcom-spmi-temp-alarm: Drop unused driver data
thermal: rcar_gen3: Reuse logic to read fuses on Gen3 and Gen4
thermal: rcar_gen3: Use lowercase hex constants
dt-bindings: thermal: Correct indentation and style in DTS example
thermal/drivers/brcmstb_thermal: Add support for BCM74110
dt-bindings: thermal: Update for BCM74110
thermal/drivers/mediatek/lvts: Only update IRQ enable for valid sensors
thermal/drivers/mediatek/lvts: Start sensor interrupts disabled
thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold
thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold
thermal/drivers/mediatek/lvts: Disable monitor mode during suspend
thermal: core: Remove duplicate struct declaration
thermal/drivers/rockchip: Add missing rk3328 mapping entry
thermal/drivers/tsens: Add TSENS enable and calibration support for V2
dt-bindings: thermal: tsens: Add ipq5332, ipq5424 compatible
thermal/drivers/qoriq: Power down TMU on system suspend
thermal/drivers/qoriq: Use dev_err_probe() simplify the code