* add majority vote to e2e
* extract policies to a separate package
Co-authored-by: Raul Jordan <raul@prysmaticlabs.com>
Co-authored-by: prylabs-bulldozer[bot] <58059840+prylabs-bulldozer[bot]@users.noreply.github.com>
* Some fixes
* Merge branch 'master' into e2e-fixes
* Add another small delay
* Merge branch 'e2e-fixes' of github.com:prysmaticlabs/prysm into e2e-fixes
* Remove genesis test, make normal e2e run longer
* Gaz
* more fixes
* Merge branch 'master' into e2e-fixes
* Merge refs/heads/master into e2e-fixes
* Fix comment
* Merge refs/heads/master into e2e-fixes
* Fixes for long running E2E
* Merge branch 'master' of github.com:prysmaticlabs/prysm into fix-e2e
* Move metrics check up
* Merge refs/heads/master into fix-e2e
* Increase time for test to start
* Try anothre fix
* Set minimum participation back to 100%
* Change bnode count to 2
* Give extra wiggle room for metrics
* Remove comment
* Progress on metrics tests
* Progress on metrics test
* Get metrics E2E working
* Merge branch 'master' of https://github.com/prysmaticlabs/prysm into e2e-metrics
* Complete most of metrics tests
* Change E2E polling to the middle of a slot, instead of at the start of the middle
* Add metrics to all E2E
* Remove extra types
* Update endtoend/evaluators/metrics.go
Co-Authored-By: Preston Van Loon <preston@prysmaticlabs.com>
* Merge branch 'master' into e2e-metrics
* Add more comments, address feedback
* Merge branch 'e2e-metrics' of https://github.com/prysmaticlabs/prysm into e2e-metrics
* Fix build
* Remove unneeded comment
* Set E2E_EPOCHS back
* Improve sync testing reliability
* Remove metrics check from slashing
* Improve time allotted to sync
* Remove possibly flaky sync test change
* WIP add deposits
* Modify validator component
* Merge branch 'master' of https://github.com/prysmaticlabs/prysm into e2e-add-depsoits
* Fix e2e
* Merge branch 'master' of https://github.com/prysmaticlabs/prysm into e2e-add-depsoits
* Merge branch 'master' of https://github.com/prysmaticlabs/prysm into e2e-add-depsoits
* Start running with extra deposits
* Begin adding evluator for e2e deposit
* Get deposit E2E working
* Add more rigorous testing for deposits
* Merge branch 'master' of https://github.com/prysmaticlabs/prysm into e2e-add-depsoits
* Improve policy for deposits
* Fix build
* Remove sync testing for long running e2e
* Undo shard change
* Undo unneeded changes
* Adjust for comments
* Merge branch 'master' into e2e-add-depsoits
* Fix bug where long running E2E would always run
* Merge branch 'master' of https://github.com/prysmaticlabs/prysm into e2e-add-depsoits
* Merge branch 'e2e-add-depsoits' of https://github.com/0xKiwi/Prysm into e2e-add-depsoits
* Merge branch 'master' into e2e-add-depsoits
* Start adding "inject slashing into pool"
* Attempt at slashing
* Remove unneded
* Fix
* Begin adding slasher client to e2e
* Start slasher in e2e
* Get slashing detection working
* Get slashing evaluators working
* Progress on e2e
* Cleanup e2e
* Fix slasher e2e!
* lint
* Comment
* Fixes
* Improve accuracy of balance check
* REmove extra
* Remove extra
* Make more accurate
* Change NoGenesisDelay to CustomGenesisDelay
* Implement flag
* gazelle
* Fix docs
* Merge branch 'master' of https://github.com/prysmaticlabs/Prysm into custom-genesis-delay
* Fix
* Gazelle
* Add case to fix bad math
* Merge branch 'master' into custom-genesis-delay
* Complete evaluator for chain consensus
* Add sync e2e test
* Cleanup
* Rename
* Add tad more offset for correct head
* Change offset to middle of slot
* Change head block root to head epoch
* comment
* Fix eth1
* Address comments
* Gazelle
* Change to use file
* Change to use reader
* Use fil
* Add committees helper, benchmark, results show 62ms for 8k validators which was previously 4 minutes
* Add regression test with same data
* fix epoch conversion
* lint
* undo and lint
* Begin work on adding mainnet config benchmark
* Try more to get mainnet e2e
* Try to fix delay
* Get past chainstart on e2e
* Try to fix flaky
* Get demo config working
* Remove unneeded changes
* Change how flags are enabled
* Lower shard count
* Temp skip
* Fix e2e
* Fix testing to run until last epoch
* Fix
* Add ending time log and remove att cache flag
* Fix ordering
* Reenable flag
* Change ports from default
* Add no log for if there are no err logs
* Add block evaluator
* Try to improve evaluators
* Progress on attestation evaluator
* Remove attestation evaluator
* Fix e2e
Co-authored-by: Preston Van Loon <preston@prysmaticlabs.com>
* e2e ssz cache busting
* use ssz cache for e2e
* caching ensure
* fix up the cache even more
* gazelle
* formatting
* formatting
* add back cache for val registry
* sync
* fix up commented item
* add attestations
* Merge branch 'master' into e2e-ssz-cache
* Merge branch 'master' into e2e-ssz-cache
* Merge branch 'e2e-ssz-cache' of github.com:prysmaticlabs/prysm into e2e-ssz-cache
* formatting
* gaz
* Merge branch 'master' into e2e-ssz-cache
* resolve comments
* Merge branch 'master' into e2e-ssz-cache
* naming of test
* Merge refs/heads/master into e2e-ssz-cache
* Merge refs/heads/master into e2e-ssz-cache
* Begin working on end to end tests using geth dev chain
* Start on beacon node set up
* More progress on bnode setup
* Complete flow until chainstart, begin work on evaluators
* More progress on evaluators
* Start changing bazel run to direct binary
* Move endtoend to inside beacon-chain
* use bazel provided geth, use bazel test
* tempdir
* use fork rules_go
* Change to use UUID dir and bazel binaries
* Truncate UUID a bit
* Get full run from chainstart to evaluating
* Rewrite to react to logs rather than arbitrarily wait
* Fix export
* Move evaluators to evaluators.go
* Add peer check test
* Add more comments
* Remove unneeded exports
* Check all nodes have the correct amount of peers
* Change name to onGenesisEpoch
* Remove extra wait times where not needed
* Cleanup
* Add log for beacon start
* Fix deposit amount
* Make room for eth1follow distnce
* Cleanup and fix minimal test
* Goimports
* Fix imports
* gazelle and minimal
* manual
* Fix for comments
* Make timing rely on reading logs, and cleanup
* Fix for comments
* Fix workspace
* Cleanup
* Fix visibility
* Cleanup and some comments
* Address comments
* Fix for v0.9
* Modify for v0.9
* Move to own package outside of beacon-chain
* Gazelle
* Polishing, logging
* Fix filenames
* Add more logs
* Add flag logging
* Cover for page not having libp2p info
* Improve multiAddr detection
* Add more logs
* Add missing flags
* Add log printing to defer
* Get multiAddr from logs
* Fix logging and detection
* Change evaluators to rely on EpochTimer
* Add evaluator for ValidatorParticipation
* Fix validator participation evaluator
* Cleanup, comments and fix participation calculation
* Cleanup
* Let the file searcher search for longer
* Change participation to check for full
* Log out file contents if text isnt found
* Split into different files
* Disable IPC and use RPC instead, change tmp dir to bazel dir
* Change visibility
* Gazelle
* Add e2e tag
* new line
