Go to file
2024-02-23 15:25:55 -06:00
.github cmd/devp2p/internal/ethtest: skip large tx test on github build (#28794) 2024-01-12 15:14:03 +01:00
accounts core: move genesis alloc types to core/types (#29003) 2024-02-16 19:05:33 +01:00
beacon eth/catalyst,beacon/engine: implement GetClientVersionV1 (#28915) 2024-02-15 12:01:30 +01:00
build tests: update execution spec tests + split statetest exec (#28993) 2024-02-15 13:30:11 +01:00
cmd Add network config for Testnet-V4 2024-02-21 14:15:03 -06:00
common all: use uint256 in state (#28598) 2024-01-23 14:51:58 +01:00
consensus Switch sacrifice credits based on chainID 2024-02-21 14:15:03 -06:00
console cmd/geth: add support for --dev flag in dumpgenesis (#28463) 2023-11-22 12:08:39 +01:00
core Add network config for Testnet-V4 2024-02-21 14:15:03 -06:00
crypto internal/ethapi: add support for blobs in eth_fillTransaction (#28839) 2024-02-08 19:53:32 +01:00
docs docs/postmortems: fix outdated link (#28893) 2024-01-29 16:40:57 +01:00
eth Add network config for Testnet-V4 2024-02-21 14:15:03 -06:00
ethclient Add padding to gas estimations 2024-02-21 14:15:03 -06:00
ethdb trie: remove inconsistent trie nodes during sync in path mode (#28595) 2023-12-08 14:28:23 +01:00
ethstats ethstats: prevent panic if head block is not available (#29020) 2024-02-19 07:25:53 +01:00
event event: fix Resubscribe deadlock when unsubscribing after inner sub ends (#28359) 2023-10-22 17:37:56 +02:00
graphql Add padding to gas estimations 2024-02-21 14:15:03 -06:00
internal Add padding to gas estimations 2024-02-21 14:15:03 -06:00
log all: fix docstring names (#28923) 2024-02-07 21:10:49 +01:00
metrics all: fix docstring names (#28923) 2024-02-07 21:10:49 +01:00
miner core/txpool, eth, miner: retrieve plain and blob txs separately (#29026) 2024-02-20 11:37:23 +02:00
node node, rpc: add configurable HTTP request limit (#28948) 2024-02-07 21:06:38 +01:00
p2p all: fix docstring names (#28923) 2024-02-07 21:10:49 +01:00
params Prepare stable release 2024-02-23 15:25:55 -06:00
pulse Switch sacrifice credits based on chainID 2024-02-21 14:15:03 -06:00
rlp rlp/rlpgen: remove build tag (#28106) 2023-09-14 12:28:40 +02:00
rpc node, rpc: add configurable HTTP request limit (#28948) 2024-02-07 21:06:38 +01:00
signer internal/ethapi, signer/core: fix documentation-links (#28979) 2024-02-13 10:14:18 +01:00
swarm swarm: fix outdated link (#26501) 2023-01-16 11:00:55 +01:00
tests core: move genesis alloc types to core/types (#29003) 2024-02-16 19:05:33 +01:00
trie all: remove the dependency from trie to triedb (#28824) 2024-02-13 14:49:53 +01:00
triedb all: remove the dependency from trie to triedb (#28824) 2024-02-13 14:49:53 +01:00
.dockerignore cmd, internal/build, docker: advertise commit date in unstable build versions (#19522) 2019-05-08 16:44:28 +03:00
.gitattributes .gitattributes: enable solidity highlighting on github (#16425) 2018-04-03 15:21:24 +02:00
.gitignore git: ignore tests/spec-tests folder (#28254) 2023-10-10 10:56:50 +02:00
.gitlab-ci.yml Add build automation 2024-02-21 14:15:03 -06:00
.gitmodules tests: external evm benchmarks (#24050) 2022-01-28 08:47:19 +01:00
.golangci.yml build: upgrade to golangci-lint v1.55.2 (#28712) 2023-12-20 15:36:10 +01:00
.mailmap AUTHORS: remove one more duplicate entry (#24950) 2022-05-24 21:04:21 +02:00
.travis.yml ci: disable lint on travis (#28706) 2023-12-19 10:35:02 +01:00
appveyor.yml core/state, tests: fix memory leak via fastcache (#28387) 2023-10-20 13:35:49 +02:00
AUTHORS AUTHORS: remove one more duplicate entry (#24950) 2022-05-24 21:04:21 +02:00
circle.yml circleci: enable docker based hive testing 2016-07-15 16:07:34 +03:00
COPYING COYPING: restore the full text text of GPL (#21568) 2020-09-15 08:27:17 +02:00
COPYING.LESSER all: update license information 2015-07-07 14:12:44 +02:00
Dockerfile travis, build: update Go to 1.21.0 (#27958) 2023-08-22 11:00:01 +03:00
Dockerfile.alltools Dockerfile: update Go to 1.21 (#28538) 2023-11-17 16:48:06 +02:00
go.mod core/txpool/blobpool: update the blob db with corruption handling (#29001) 2024-02-16 16:33:14 +01:00
go.sum core/txpool/blobpool: update the blob db with corruption handling (#29001) 2024-02-16 16:33:14 +01:00
interfaces.go ethereum, ethclient: add blob transaction fields in CallMsg (#28989) 2024-02-15 10:08:46 +01:00
Makefile Makefile: add help target to display available targets (#28845) 2024-02-05 22:48:19 +01:00
oss-fuzz.sh tests/fuzzers: move fuzzers into native packages (#28467) 2023-11-14 14:34:29 +01:00
README.md Add network config for Testnet-V4 2024-02-21 14:15:03 -06:00
SECURITY.md Update readme & security file 2024-02-21 14:15:03 -06:00

Go-Pulse: A PulseChain Execution Client Written in Go

This is the core repository for Go-Pulse, a Golang implementation of the Ethereum Execution Layer with added support for PulseChain.

This project is forked from Go-Ethereum, the official Golang implementation of the Ethereum protocol. Credit goes to the Go-Ethereum developers for the original development.

Building the source

For prerequisites and detailed build instructions please read the Installation Instructions.

Building geth requires both a Go (version 1.19 or later) and a C compiler. You can install them using your favourite package manager. Once the dependencies are installed, run

make geth

or, to build the full suite of utilities:

make all

Executables

The go-pulse project comes with several wrappers/executables found in the cmd directory.

Command Description
geth Our main Ethereum/PulseChain CLI client. It is the entry point into the Ethereum or PulseChain networks (main-, test- or private net), capable of running as a full node (default), archive node (retaining all historical state) or a light node (retrieving data live). It can be used by other processes as a gateway into the Ethereum/PulseChain networks via JSON RPC endpoints exposed on top of HTTP, WebSocket and/or IPC transports. geth --help and the CLI page for command line options.
clef Stand-alone signing tool, which can be used as a backend signer for geth.
devp2p Utilities to interact with nodes on the networking layer, without running a full blockchain.
abigen Source code generator to convert Ethereum contract definitions into easy-to-use, compile-time type-safe Go packages. It operates on plain Ethereum contract ABIs with expanded functionality if the contract bytecode is also available. However, it also accepts Solidity source files, making development much more streamlined. Please see our Native DApps page for details.
bootnode Stripped down version of our Ethereum/PulseChain client implementation that only takes part in the network node discovery protocol, but does not run any of the higher level application protocols. It can be used as a lightweight bootstrap node to aid in finding peers in private networks.
evm Developer utility version of the EVM (Ethereum Virtual Machine) that is capable of running bytecode snippets within a configurable environment and execution mode. Its purpose is to allow isolated, fine-grained debugging of EVM opcodes (e.g. evm --code 60ff60ff --debug run).
rlpdump Developer utility tool to convert binary RLP (Recursive Length Prefix) dumps (data encoding used by the Ethereum protocol both network as well as consensus wise) to user-friendlier hierarchical representation (e.g. rlpdump --hex CE0183FFFFFFC4C304050583616263).

Running geth

Going through all the possible command line flags is out of scope here (please consult our CLI Wiki page), but we've enumerated a few common parameter combos to get you up to speed quickly on how you can run your own geth instance.

Hardware Requirements

Minimum:

  • CPU with 2+ cores
  • 4GB RAM
  • 1TB free storage space to sync the Mainnet
  • 8 MBit/sec download Internet service

Recommended:

  • Fast CPU with 4+ cores
  • 16GB+ RAM
  • High-performance SSD with at least 1TB of free space
  • 25+ MBit/sec download Internet service

Full node on the main Ethereum network

By far the most common scenario is people wanting to simply interact with the Ethereum network: create accounts; transfer funds; deploy and interact with contracts. For this particular use case, the user doesn't care about years-old historical data, so we can sync quickly to the current state of the network. To do so:

$ geth console

This command will:

  • Start geth in snap sync mode (default, can be changed with the --syncmode flag), causing it to download more data in exchange for avoiding processing the entire history of the Ethereum network, which is very CPU intensive.
  • Start the built-in interactive JavaScript console, (via the trailing console subcommand) through which you can interact using web3 methods (note: the web3 version bundled within geth is very old, and not up to date with official docs), as well as geth's own management APIs. This tool is optional and if you leave it out you can always attach it to an already running geth instance with geth attach.

A Full node on the Görli test network

Transitioning towards developers, if you'd like to play around with creating Ethereum contracts, you almost certainly would like to do that without any real money involved until you get the hang of the entire system. In other words, instead of attaching to the main network, you want to join the test network with your node, which is fully equivalent to the main network, but with play-Ether only.

$ geth --goerli console

The console subcommand has the same meaning as above and is equally useful on the testnet too.

Specifying the --goerli flag, however, will reconfigure your geth instance a bit:

  • Instead of connecting to the main Ethereum network, the client will connect to the Görli test network, which uses different P2P bootnodes, different network IDs and genesis states.
  • Instead of using the default data directory (~/.ethereum on Linux for example), geth will nest itself one level deeper into a goerli subfolder (~/.ethereum/goerli on Linux). Note, on OSX and Linux this also means that attaching to a running testnet node requires the use of a custom endpoint since geth attach will try to attach to a production node endpoint by default, e.g., geth attach <datadir>/goerli/geth.ipc. Windows users are not affected by this.

Note: Although some internal protective measures prevent transactions from crossing over between the main network and test network, you should always use separate accounts for play and real money. Unless you manually move accounts, geth will by default correctly separate the two networks and will not make any accounts available between them.

Full node on PulseChain Testnet V4

To connect to the PulseChain Testnet V4:

$ geth --pulsechain-testnet-v4 console

Configuration

As an alternative to passing the numerous flags to the geth binary, you can also pass a configuration file via:

$ geth --config /path/to/your_config.toml

To get an idea of how the file should look like you can use the dumpconfig subcommand to export your existing configuration:

$ geth --your-favourite-flags dumpconfig

Note: This works only with geth v1.6.0 and above.

Docker quick start

One of the quickest ways to get Go-Pulse up and running on your machine is by using Docker:

docker run -d --name pulsechain-execution-node -v /Users/alice/pulse:/root \
           -p 8545:8545 -p 30303:30303 \
           registry.gitlab.com/pulsechaincom/go-pulse --pulsechain-testnet-v4

This will start geth in snap-sync mode with a DB memory allowance of 1GB, as the above command does. It will also create a persistent volume in your home directory for saving your blockchain as well as map the default ports. There is also an alpine tag available for a slim version of the image.

Do not forget --http.addr 0.0.0.0, if you want to access RPC from other containers and/or hosts. By default, geth binds to the local interface and RPC endpoints are not accessible from the outside.

Programmatically interfacing geth nodes

As a developer, sooner rather than later you'll want to start interacting with geth and the PulseChain network via your own programs and not manually through the console. To aid this, geth has built-in support for a JSON-RPC based APIs (standard APIs and geth specific APIs). These can be exposed via HTTP, WebSockets and IPC (UNIX sockets on UNIX based platforms, and named pipes on Windows).

The IPC interface is enabled by default and exposes all the APIs supported by geth, whereas the HTTP and WS interfaces need to manually be enabled and only expose a subset of APIs due to security reasons. These can be turned on/off and configured as you'd expect.

HTTP based JSON-RPC API options:

  • --http Enable the HTTP-RPC server
  • --http.addr HTTP-RPC server listening interface (default: localhost)
  • --http.port HTTP-RPC server listening port (default: 8545)
  • --http.api API's offered over the HTTP-RPC interface (default: eth,net,web3)
  • --http.corsdomain Comma separated list of domains from which to accept cross origin requests (browser enforced)
  • --ws Enable the WS-RPC server
  • --ws.addr WS-RPC server listening interface (default: localhost)
  • --ws.port WS-RPC server listening port (default: 8546)
  • --ws.api API's offered over the WS-RPC interface (default: eth,net,web3)
  • --ws.origins Origins from which to accept WebSocket requests
  • --ipcdisable Disable the IPC-RPC server
  • --ipcapi API's offered over the IPC-RPC interface (default: admin,debug,eth,miner,net,personal,txpool,web3)
  • --ipcpath Filename for IPC socket/pipe within the datadir (explicit paths escape it)

You'll need to use your own programming environments' capabilities (libraries, tools, etc) to connect via HTTP, WS or IPC to a geth node configured with the above flags and you'll need to speak JSON-RPC on all transports. You can reuse the same connection for multiple requests!

Note: Please understand the security implications of opening up an HTTP/WS based transport before doing so! Hackers on the internet are actively trying to subvert Ethereum/PulseChain nodes with exposed APIs! Further, all browser tabs can access locally running web servers, so malicious web pages could try to subvert locally available APIs!

Operating a private network

Maintaining your own private network is more involved as a lot of configurations taken for granted in the official networks need to be manually set up.

Defining the private genesis state

First, you'll need to create the genesis state of your networks, which all nodes need to be aware of and agree upon. This consists of a small JSON file (e.g. call it genesis.json):

{
  "config": {
    "chainId": <arbitrary positive integer>,
    "homesteadBlock": 0,
    "eip150Block": 0,
    "eip155Block": 0,
    "eip158Block": 0,
    "byzantiumBlock": 0,
    "constantinopleBlock": 0,
    "petersburgBlock": 0,
    "istanbulBlock": 0,
    "berlinBlock": 0,
    "londonBlock": 0
  },
  "alloc": {},
  "coinbase": "0x0000000000000000000000000000000000000000",
  "difficulty": "0x20000",
  "extraData": "",
  "gasLimit": "0x2fefd8",
  "nonce": "0x0000000000000042",
  "mixhash": "0x0000000000000000000000000000000000000000000000000000000000000000",
  "parentHash": "0x0000000000000000000000000000000000000000000000000000000000000000",
  "timestamp": "0x00"
}

The above fields should be fine for most purposes, although we'd recommend changing the nonce to some random value so you prevent unknown remote nodes from being able to connect to you. If you'd like to pre-fund some accounts for easier testing, create the accounts and populate the alloc field with their addresses.

"alloc": {
  "0x0000000000000000000000000000000000000001": {
    "balance": "111111111"
  },
  "0x0000000000000000000000000000000000000002": {
    "balance": "222222222"
  }
}

With the genesis state defined in the above JSON file, you'll need to initialize every geth node with it prior to starting it up to ensure all blockchain parameters are correctly set:

$ geth init path/to/genesis.json

Creating the rendezvous point

With all nodes that you want to run initialized to the desired genesis state, you'll need to start a bootstrap node that others can use to find each other in your network and/or over the internet. The clean way is to configure and run a dedicated bootnode:

$ bootnode --genkey=boot.key
$ bootnode --nodekey=boot.key

With the bootnode online, it will display an enode URL that other nodes can use to connect to it and exchange peer information. Make sure to replace the displayed IP address information (most probably [::]) with your externally accessible IP to get the actual enode URL.

Note: You could also use a full-fledged geth node as a bootnode, but it's the less recommended way.

Starting up your member nodes

With the bootnode operational and externally reachable (you can try telnet <ip> <port> to ensure it's indeed reachable), start every subsequent geth node pointed to the bootnode for peer discovery via the --bootnodes flag. It will probably also be desirable to keep the data directory of your private network separated, so do also specify a custom --datadir flag.

$ geth --datadir=path/to/custom/data/folder --bootnodes=<bootnode-enode-url-from-above>

Note: Since your network will be completely cut off from the main and test networks, you'll also need to configure a miner to process transactions and create new blocks for you.

Running a private miner

In a private network setting a single CPU miner instance is more than enough for practical purposes as it can produce a stable stream of blocks at the correct intervals without needing heavy resources (consider running on a single thread, no need for multiple ones either). To start a geth instance for mining, run it with all your usual flags, extended by:

$ geth <usual-flags> --mine --miner.threads=1 --miner.etherbase=0x0000000000000000000000000000000000000000

Which will start mining blocks and transactions on a single CPU thread, crediting all proceedings to the account specified by --miner.etherbase. You can further tune the mining by changing the default gas limit blocks converge to (--miner.targetgaslimit) and the price transactions are accepted at (--miner.gasprice).

License

The go-pulse library (i.e. all code outside of the cmd directory), like the upstream go-ethereum, is licensed under the GNU Lesser General Public License v3.0, also included in our repository in the COPYING.LESSER file.

The go-pulse binaries (i.e. all code inside of the cmd directory), like the upstream go-ethereum, are licensed under the GNU General Public License v3.0, also included in our repository in the COPYING file.